Brands

SKU: DF-SEN0007 | Brand: DFRobot

The SRF08 is an evolutionary step up from the SRF04. It requires less power to operate, has a longer range (up to 6m) and it performs its own internal timing of the return echo. The SRF08 is also fitted with an LDR...

SKU: AF-866 | Brand: Adafruit

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Each block connector has a metal block inside and three levers that snap ...

SKU: AF-868 | Brand: Adafruit

A hands-on project book by Simon Monk featuring 30 practical Arduino-based builds. Each project uses easy-to-find components and step-by-step instructions, making it accessible even without prior programming experienc...

SKU: SF-COM-09481 | Brand: SparkFun

This compact 4-digit 7-segment display in blue features 10 mm digit height with a common-anode configuration. Each digit has its own decimal point, and the display includes individually controllable apostrophe and col...

SKU: AF-872 | Brand: Adafruit

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright yellow-green dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA ...

SKU: AF-873 | Brand: Adafruit

Here's a sticker for the MENTA, a portable minty Arduino-compatible project that fits into a common mint tin. The sticker is sized perfectly for our Altoids-size tin (tin not included). All MENTA orders (place...

SKU: DF-FIT0514 | Brand: DFRobot

These wire offers you the best way to connect sensors and actuators to your LattePanda! They are specially designed for LattePanda and DFRobot Gravity Sensors. It compatible with a wide range of Gravity sensors and...

SKU: AF-2082 | Brand: Adafruit

The Timber Pibow is a layered wood enclosure from Pimoroni for the Raspberry Pi 1 Model B+. Crafted from high-quality wood with transparent acrylic top and base layers, it provides a natural, elegant look while protec...

SKU: DF-DFR0072 | Brand: DFRobot

At sometime or another you may run out of pins on your Arduino board and need to extend it with shift registers.  With this shift out module which is based on 74HC595. The datasheet refers to the 74HC595 as an "8...

SKU: SF-ROB-12405 | Brand: SparkFun

These wheel adaptors allow you to adapt 12mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows you to run 6-32 socket head screws into any .770” hub or component that utilizes the .770” hub ...

SKU: AF-3535 | Brand: Adafruit

A VGA to HDMI converter that takes an analogue VGA video signal and 3.5 mm stereo audio input and combines them into a digital HDMI output. Ideal for connecting older VGA-output computers, game systems, or other devic...

SKU: AF-2088 | Brand: Adafruit

The Adafruit 1.44" Colour TFT LCD Display Breakout is a compact 128×128 pixel screen driven by the ST7735R controller over 4-wire SPI. Unlike older CSTN displays, this is a true TFT with full 16-bit colour and fast re...

SKU: AF-715 | Brand: Adafruit

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connecti...

SKU: DF-FIT0078 | Brand: DFRobot

A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6"...

SKU: DF-DFR0488 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the...

SKU: AF-3538 | Brand: Adafruit

Add heat-vision to your project with the Adafruit AMG8833 Grid-EYE Breakout. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like...

SKU: SF-SEN-09403 | Brand: SparkFun

This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. This sensor has a high sensitivity and f...

SKU: DF-DFR0485 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the Io...

SKU: DF-DFR0484 | Brand: DFRobot

DFRobot FireBeetle is a low-power consumption micro-controller intentionally designed for Internet of Things (IoT). This series micro-controllers aims at IoT node of low-power consumption, attending to build the Io...

SKU: AF-2048 | Brand: Adafruit

Oh say can you see By the knob's early light... Sorry - we thought that was clever.  And while it wasn't really, this potentiometer knob definitely is.  It's a 'soft touch' T18 knob that works great with...