Adafruit FeatherWing 128x64 OLED Add-on
SKU: AF-6313 | Brand: Adafruit
Add a crisp monochrome display and simple user controls to your Feather project with this fully assembled FeatherWing. It combines a 128x64 white OLED screen with three user buttons labelled A, B and C, plus a reset b...
Delivered by Tue 15 Dec
MLX90632 FIR Remote Thermal Temperature Sensor
SKU: AF-6403 | Brand: Adafruit
This compact breakout uses Melexis' MLX90632 FIR sensor to read the temperature of a target without making contact. It's handy for checking surfaces that are hot, cold, moving, delicate or awkward to reach with a prob...
Delivered by Tue 15 Dec
STCC4 + SHT41 CO2, Temperature & Humidity Sensor
SKU: AF-6478 | Brand: Adafruit
This compact breakout combines the STCC4 CO2 sensor with a Sensirion SHT41 temperature and humidity sensor for convenient indoor air monitoring. The STCC4 measures true CO2 using a thermal conductivity method rather t...
Delivered by Tue 15 Dec
Adafruit QMC5883P Triple-Axis Magnetometer
SKU: AF-6388 | Brand: Adafruit
This compact breakout makes it easy to measure magnetic fields in three axes for compass, navigation and orientation projects. It is built around the QMC5883P, a magnetometer commonly used in quadcopter and robotics d...
Delivered by Tue 15 Dec
STEMMA Analog SPDT Switch - MAX4544, 12V, JST PH 2mm
SKU: AF-5892 | Brand: Adafruit
This breakout makes it much easier to use the tiny MAX4544 SPDT analogue switch in prototypes and one-off builds. It gives you a solid-state alternative to a relay for switching between two analogue signal paths, with...
Delivered by Tue 15 Dec
Adafruit Soil Sensor Kit for micro:bit v2
SKU: AF-6352 | Brand: Adafruit
This classroom-friendly kit pairs a micro:bit v2.2 with a simple soil sensor so students can monitor a pot plant and learn a bit of programming at the same time. It was designed to work with the "FarmBeats for Student...
Delivered by Tue 15 Dec
Adafruit Qualia ESP32-S3 for RGB-666 TFT Displays
SKU: AF-5800 | Brand: Adafruit
Built for larger TTL-interface TFTs, this development board makes it much easier to experiment with 40-pin RGB-666 displays using an ESP32-S3. It is aimed at panels that go beyond the usual SPI-driven sizes and resolu...
Delivered by Tue 15 Dec
Adafruit TMP119 ±0.03°C I2C Temperature Sensor
SKU: AF-6482 | Brand: Adafruit
Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, includin...
Delivered by Mon 23 Nov
TCS3430/TCS34303 Ambient Tri-Stimulus Colour Sensor
SKU: AF-6479 | Brand: Adafruit
This breakout brings ambient light tri-stimulus colour sensing to your project using CIE XYZ plus an IR channel, rather than the more common RGB-style approach. It is designed for applications where you want access to...
Delivered by Tue 15 Dec
Adafruit LM73100 23V 5A Ideal Diode Breakout
SKU: AF-6359 | Brand: Adafruit
This breakout lets you add an ideal diode to a higher-current DC power path without the usual forward voltage drop of a standard diode. It is designed for 3~23V DC supplies and up to 5A, using the LM73100's back-to-ba...
Delivered by Tue 15 Dec
GPS-RTK Board - NEO-M8P-2 (Qwiic)
SKU: SF-GPS-15005 | Brand: SparkFun
Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK...
Delivered by Wed 2 Dec
RedBoard Plus Arduino-Compatible Development Board
SKU: SF-DEV-18158 | Brand: SparkFun
This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Un...
Delivered by Wed 2 Dec
Qwiic Directional Pad (PRT-26851)
SKU: SF-PRT-26851 | Brand: SparkFun
Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The ...
Delivered by Wed 2 Dec
LIS3DH Triple Axis Accelerometer Breakout (Qwiic)
SKU: SF-SEN-29528 | Brand: SparkFun
Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, o...
Delivered by Wed 2 Dec
FPC2534 Qwiic Fingerprint Sensor
SKU: SF-SEN-29854 | Brand: SparkFun
This breakout brings secure fingerprint authentication to embedded projects while keeping the complex biometric work on the sensor itself. Built around the FPC2534 from Fingerprint Cards AB, it handles enrolment, encr...
Delivered by Wed 2 Dec
MicroMod GNSS RTK Carrier Board - ZED-F9P
SKU: SF-GPS-17722 | Brand: SparkFun
Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accu...
Delivered by Wed 2 Dec
Qwiic MultiStar Constellation Ornament
SKU: SF-WIG-21277 | Brand: SparkFun
Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board ...
Delivered by Wed 2 Dec
Qwiic Alphanumeric Display - Pink
SKU: SF-COM-16919 | Brand: SparkFun
Add bright pink letters, numbers and symbols to your project with this Qwiic alphanumeric display. Its fourteen-segment digits give you far more flexibility than a standard seven-segment display, making it useful for ...
Delivered by Wed 2 Dec
Indoor Air Quality Combo Sensor - SCD41/SEN55 (Qwiic)
SKU: SF-SEN-25200 | Brand: SparkFun
Build a detailed indoor air monitor with this Qwiic combo board, pairing Sensirion’s SCD41 CO2 sensor with the SEN55 environmental sensor node. Together they measure CO2, volatile organic compounds (VOCs), particulate...
Delivered by Wed 2 Dec
Thing Plus RP2350 Wireless Development Board (Ding & Dent)
SKU: SF-DD-27675 | Brand: SparkFun
This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C,...
Delivered by Wed 2 Dec
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared