Brands

SKU: KI-35164 | Brand: Kitronik

The Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations. It has been designed such that its power requirement is within the sup...

SKU: AF-5709 | Brand: Adafruit

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...

SKU: DF-SEN0540 | Brand: DFRobot

The Gravity LTR390-UV sensor provides both ambient light and UV sensing with a UV spectral response from 280nm to 430nm. It features high sensitivity, quick response, and strong anti-interference performance. With a ...

SKU: SF-DEV-21247 | Brand: SparkFun

The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...

SKU: SF-SPX-20691 | Brand: SparkFun

The STMicroelectronics ST25DV dynamic Near Frequency Communication / Radio Frequency Identification tag ICs are awesome! The ST25DV64KC offers 64-kBit (8-kBytes) of EEPROM memory which can be accessed over both I2C an...

SKU: PL-4733 | Brand: Pololu

The MP6550 from Monolithic Power Systems (MPS) is an H-bridge motor driver IC that can be used for bidirectional control of one brushed DC motor at 1.8 V to 22 V. It can supply up to about 1.7 A continuously and featu...

SKU: AF-5691 | Brand: Adafruit

The Adafruit ESP32-S3 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an e...

SKU: AF-5628 | Brand: Adafruit

A compact, self-centering analogue thumbstick with a feel and size similar to Nintendo Joy-Con joysticks. It uses two 10kΩ potentiometers (one for each axis) to provide proportional X/Y analogue output, plus a centre-...

SKU: DF-DFR0979 | Brand: DFRobot

The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrup...

SKU: AF-5652 | Brand: Adafruit

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Syn...

SKU: AF-5663 | Brand: Adafruit

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a ...

SKU: AF-5619 | Brand: Adafruit

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not ...

SKU: DF-FIT0903 | Brand: DFRobot

The cable is compatible with LattePanda 2 Alpha&Delta, and LattePanda 3 Delta 864.With the DC 5.5x2.1mm Power Cable, LattePanda can be powered by a common 12V DC power supply or a 12V battery pack easily. Feat...

SKU: AF-5473 | Brand: Adafruit

Why settle for a boring old hex key set when you can get one with a burst of color like this 9 Piece Rainbow Metric Allen Wrench / Hex Key Set. If your DIY project has hexagonal screws, you’re gonna need hex keys (als...

SKU: AF-5611 | Brand: Adafruit

The Adafruit PCF8575 GPIO Expander Breakout is an affordable 16-channel I2C GPIO expander that doubles your available digital I/O over a simple two-wire connection. Add extra buttons, LEDs, relays, or other digital pe...

SKU: AF-5610 | Brand: Adafruit

The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configura...

SKU: AF-5521 | Brand: Adafruit

A magnetic right-angle USB-C adapter that handles up to 120 W of power and supports data transfer. Insert the magnetic nub into your device's USB-C port, then snap your cable onto it magnetically — giving you a quick-...

SKU: AF-5505 | Brand: Adafruit

These non-flexible LED filaments are often seen in 'Edison-like' LED bulbs, arranged in different patterns to give a bright warm lighting effect. They're made of dozens of micro LED diodes that are bonded together ...

SKU: AF-5508 | Brand: Adafruit

Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got here are flexible LED noodles, in different lengths and colors. All are no...

SKU: AF-5474 | Brand: Adafruit

A comprehensive set of 30 barrel jack plug adapters that convert a standard 5.5mm / 2.1mm DC jack to a wide variety of other tip sizes. Perfect for powering devices that use non-standard barrel connectors from your ex...