Brands

SKU: SF-PRT-11366 | Brand: SparkFun

This is the Big Red Box! These beefy, bright red, flanged, plastic enclosures will give your widget the protection (and attention) it deserves. You’ve probably seen these used to enclose radio equipment or antenna bal...

SKU: SF-PRT-11363 | Brand: SparkFun

A set of three common gauges of enameled magnet wire for winding transformers, chokes, motors, and electromagnet experiments. The thin enamel coating insulates each wire, allowing tight coil windings without short cir...

SKU: SF-COM-11289 | Brand: SparkFun

These DC powered heating pads are perfect for near-body heating applications. They get warm to the touch but not too hot. Simply apply 5VDC to the wire leads and within minutes, the pad will begin to warm up.These hea...

SKU: PL-1076 | Brand: Pololu

This M3, pan-head screw is 8 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: AF-3119 | Brand: Adafruit

This HDMI plug breakout board lets you create custom HDMI cables or tap into individual HDMI pins for specialised wiring setups. The solid PCB features an HDMI plug with through-hole pads for soldering your own connec...

SKU: AF-3122 | Brand: Adafruit

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Block Breakout. You get a nice solid PCB with an DE-9 socket and two strips of terminal blocks that you can use with stra...

SKU: AF-317 | Brand: Adafruit

A small, portable inverter for EL wire. Powers off of 2 AA batteries (not included!), it can drive 1 to 8 feet (about 2.5m) of our high-brightness EL wire for 10 hours. There is a button for selecting steady/bli...

SKU: SF-DEV-13262 | Brand: SparkFun

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle positi...

SKU: SF-COM-11155 | Brand: SparkFun

These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches ...

SKU: AF-3142 | Brand: Adafruit

Our Raw Male/Male Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip...

SKU: SF-WRL-13231 | Brand: SparkFun

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC — a popular platform for IoT and WiFi-connected projects. All module pins are broken out to breadboard-compatible rows, and on-bo...

SKU: AF-3145 | Brand: Adafruit

A pack of 50 small single-row wire housings for building custom jumper cable harnesses. Compatible with both male and female crimp pins, these housings let you create exactly the wire configurations your project needs...

SKU: AF-3146 | Brand: Adafruit

Create custom wire harnesses with these single-row housings for DIY jumper cables. Compatible with both male and female jumper wires, these housings give you full control over your wiring layout and connector configur...

SKU: AF-3101 | Brand: Adafruit

Put your project in stealth mode with these silent Soft Tactile Switch Buttons.  Tactile switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless b...

SKU: AF-371 | Brand: Adafruit

A 150mm (6″) IDC ribbon cable with 6-pin (2×3) socket connectors on both ends at 0.1″ × 0.1″ (2.54mm) spacing. Commonly used for AVR ISP programming connections and other 2×3 header interfaces. Key Features Socket-...

SKU: AF-375 | Brand: Adafruit

A magnetic reed switch encased in an ABS plastic shell, commonly used to detect when a door, window, or drawer is opened. The switch half contains a normally-open reed contact, and the other half is a magnet. When the...

SKU: SF-PRT-13164 | Brand: SparkFun

This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything else. There is a 3-pin JST connector with 0.1" spacing on both ends. These jumper wires come...

SKU: AF-3111 | Brand: Adafruit

This is a box of six 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's no...

SKU: SF-PRT-13126 | Brand: SparkFun

This female barrel jack plug is great for adding a common connector to the end of wires. This jack is compatible with 5.5x2.1mm barrel connectors. The outer shell unscrews to reveal solder terminals and a crimp strain...

SKU: SF-WIG-13118 | Brand: SparkFun

The SparkFun Servo Trigger is a compact robotics board that simplifies control of hobby RC servo motors — no programming required. When an external switch or logic signal changes state, the board tells an attached ser...