Brands

SKU: AF-3191 | Brand: Adafruit

The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 1...

SKU: DF-DFR0075 | Brand: DFRobot

This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing interactive project. SPECIFICATIONS ...

SKU: AF-3231 | Brand: Adafruit

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 900 MHz (tuneable to 868...

SKU: SF-ROB-13177 | Brand: SparkFun

The Micro Gripper Kit B is a compact robotic gripper designed for small-scale robotics projects. It works with any sub-micro size Hitec servo (not included) and features the standard 0.77" hub mount pattern for easy i...

SKU: AF-394 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-3217 | Brand: Adafruit

Does your prototyping project require soldering? Are you looking for something other than your usual run-o'-the-mill solder wire? Look no further! This high quality, low cost, adorably packaged Lead-Free Prototyp...

SKU: AF-3218 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure&nbs...

SKU: SF-PRT-13113 | Brand: SparkFun

This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units, you’ll need two for each battery. These work great for larger, high capacity applications where a drop-in...

SKU: AF-412 | Brand: Adafruit

A compact push-pull solenoid with a captive armature and built-in return spring. When energised with up to 12V DC, the armature moves in one direction; when power is removed, the spring returns it to its resting posit...

SKU: SF-PRT-10927 | Brand: SparkFun

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy loo...

SKU: DF-KIT0018 | Brand: DFRobot

The DFRobot Gravity Intermediate Kit for Arduino takes you beyond the basics with a comprehensive set of sensors, modules, and an Arduino-compatible board. Starting with simple LED projects and progressing to more com...

SKU: SF-ROB-13064 | Brand: SparkFun

This is a 6 wire slip ring, a remarkably simple electromechanical assembly that allows electronic signals to be passed through its rotating innards. Commonly, you’d find slip rings in wind turbines, radar antennae, or...

SKU: SF-TOL-10865 | Brand: SparkFun

There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right screwdriver. Sure, we all have a few Phillips-head drivers and maybe a ...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: DF-DFR0213 | Brand: DFRobot

The Dreamer Nano V4 is a surface mount breadboard embedded version of the ATMEGA 32U4 with integrated Micro USB. It has everything that Arduino Leonardo has (electrically).Physically, it is just missing power jack ...

SKU: DF-FIT0414 | Brand: DFRobot

This is a handy cables kit for WTRnode users. It contains a USB to TTL cable which allows for a simple way to connect TTL interface devices to USB, and a WRTnode dedicated network cable. WRTnode(A Mini Op...

SKU: DF-FIT0416 | Brand: DFRobot

Introduction This product converts from USB output to TTL output, supports three levels, facilitates communication between PC and serial port, does not need an external crystal oscillator, has high stability and str...

SKU: DF-FIT0417 | Brand: DFRobot

A premium CNC-machined aluminium case for the Raspberry Pi B+, 2 Model B, and 3 Model B. Features anodic oxidation processing for a durable, professional finish with high-precision dimensions for a perfect fit. The gr...

SKU: SF-COM-10791 | Brand: SparkFun

A right-angle tactile switch in a sturdy through-hole package with a satisfying click. Mount it on the edge of your PCB for easy side-access button input. Specifications Orientation – Right angle (horizontal actuat...

SKU: AF-491 | Brand: Adafruit

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. It's similar in size to an arcade button (and will fit in holes drilled for 'standard' 30mm buttons) bu...