Brands

SKU: DF-FIT0250 | Brand: DFRobot

A 1.25 m braided mesh cable guide that bundles and protects your wiring. The flexible braid provides structure and rigidity to loose cables, and can be compressed to expand the opening — making it easy to feed multipl...

SKU: SF-BOB-08688 | Brand: SparkFun

Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin. Docu...

SKU: DF-DFR0221 | Brand: DFRobot

Featured in Make: The Maker's Guide to Boards, DFRobot Leonardo with Xbee Socket is an Arduino Leonardo variant processor.The Arduino Leonardo is based on the ATmega32u4 chip. It is the latest addition to the Ardu...

SKU: SF-PRT-08671 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 100mm length Documents: JST connector

SKU: DF-DFR0222 | Brand: DFRobot

Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet. The Xboard Relay combines an Atmega 32u4 microprocessor and wi...

SKU: SF-COM-08635 | Brand: SparkFun

Small electret microphone. Useful in acoustic and audio applications. Documents: Datasheet Example Audio LED control project by Adam Greig

SKU: DF-DFR0225 | Brand: DFRobot

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousand...

SKU: PL-1403 | Brand: Pololu

This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae...

SKU: AF-2928 | Brand: Adafruit

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your mi...

SKU: AF-2776 | Brand: Adafruit

This miniature push-pull solenoid features a captive armature with a return spring — when energised at ~5 V DC, the armature retracts, and when power is removed it springs back to its original position. The dual-actio...

SKU: DF-FIT0302 | Brand: DFRobot

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35...

SKU: SF-COM-08377 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our b...

SKU: SF-DEV-08321 | Brand: SparkFun

The PICAXE 8 Pin Proto Kit is a beginner-friendly kit for getting started with 8-pin PICAXE microcontrollers. It includes a handful of easy-to-solder through-hole components and a proto board, making it an ideal first...

SKU: PL-1336 | Brand: Pololu

The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB. You can write your own software or load precompiled, open-source apps onto the TI CC2511F32 microcontroller at the hea...

SKU: SF-DEV-13975 | Brand: SparkFun

At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to make our own version that combines a...

SKU: SF-COM-07950 | Brand: SparkFun

This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.This is not a true piezoelectric speaker but behaves similarly. Inst...

SKU: SF-PRT-08024 | Brand: SparkFun

Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SKU: AF-2915 | Brand: Adafruit

A 3.5 mm (1/8") 4-pole TRRS audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. ...

SKU: SF-PRT-07938 | Brand: SparkFun

A 16-pin DIP IC socket with solder-tail pins and 0.3" (300 mil) row spacing. Solder the socket to your PCB and swap ICs without desoldering — essential for prototyping and development work. Specifications Pin Count...

SKU: SF-PRT-07937 | Brand: SparkFun

Dip sockets for all your prototyping needs. If you’ve ever had to de-solder a dip part from a circuit board, you know how valuable these are! Number of pins include: 8, 14, 16, 18, 28, and 40. This is a 300mil wide ...