Brands

SKU: SF-COM-15082 | Brand: SparkFun

Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, d...

SKU: SF-DEV-15025 | Brand: SparkFun

The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor’s nRF52840 – a powerful combination of ARM Cortex-M4 CPU and 2.4GHz Bluetooth radio. With the nRF52840 at the heart of your p...

SKU: SF-COM-15111 | Brand: SparkFun

USB-C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into a port? This is a 16-pin, female, USB Type C connector that is commonl...

SKU: AF-1427 | Brand: Adafruit

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...

SKU: DF-DFR0491 | Brand: DFRobot

The Gravity IO Expansion Shield breaks out all GPIO pins from the LattePanda into Gravity-compatible 3-pin colour-coded connectors, providing plug-and-play access to hundreds of Gravity sensors and modules. Each pin i...

SKU: AF-481 | Brand: Adafruit

This chrome-plated metal pushbutton is built tough and looks great doing it. Simply drill a 16mm hole into any panel up to 12.7 mm thick, drop it in, and tighten the included nut — a rubber gasket keeps water out of y...

SKU: AF-1459 | Brand: Adafruit

This inductive charging set provides wireless power transfer using a split-transformer design. The transmitter coil is powered with 9–12 V DC, and the receiver coil outputs 3.3 V DC — no direct wire connection between...

SKU: AF-3702 | Brand: Adafruit

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. Instead of chucking your Raspberry Pi or Metro M0 Ex...

SKU: AF-3701 | Brand: Adafruit

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. Instead of chucking your Raspberry Pi or Metro M0 Ex...

SKU: AF-3670 | Brand: Adafruit

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that can make the fabric emit heat when powered. Resistive heating fabrics s...

SKU: AF-1570 | Brand: Adafruit

A compact 3.7 V lithium-ion polymer (LiPo) battery with approximately 100 mAh capacity (0.4 Wh). Thin, lightweight, and powerful, this cell is suited for small wearable projects, IoT devices, and compact electronics w...

SKU: DF-TEL0116 | Brand: DFRobot

A long-range, low-data-rate radio modem pair based on the Semtech SX1276 LoRa transceiver. Operating on the 433 MHz ISM band, these modules deliver robust wireless links with excellent sensitivity and low power consum...

SKU: DF-TEL0114 | Brand: DFRobot

LoRa MESH Radio Module is a high performance, low power, long-range micro-power RF module, using a distributed ad-hoc network communication mode, embedded wireless MESH MANET protocols, users do not need to do any...

SKU: AF-1657 | Brand: Adafruit

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-p...

SKU: AF-1661 | Brand: Adafruit

uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi boards, they're great! Chances a...

SKU: AF-1430 | Brand: Adafruit

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGB LEDs adorn the NeoPixel Shield for a blast of configurable colour. Arranged in a 5×8 matrix, each pixel is individually addressable using j...

SKU: AF-1794 | Brand: Adafruit

When you need to switch a lot of power, P channel MOSFETs are best for the job. These P-FETs can switch over 60V and 25A (with proper heat-sinking) and are TO-220 package so they fit nicely into any breadboard or perf...

SKU: AF-2133 | Brand: Adafruit

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins,...

SKU: AF-2157 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a beaut...

SKU: AF-2153 | Brand: Adafruit

Add clear, bright alphanumeric readouts to your next project with this pair of white 14-segment LED displays. Each 0.54" digit can show any letter, number, or symbol — perfect for building clocks, scoreboards, custom ...