Brands

SKU: AF-2223 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear t...

SKU: DF-FIT0096-C | Brand: DFRobot

A compact 400 tie-point solderless breadboard in a crystal-clear transparent finish, with interlocking edges and self-adhesive backing. The half-size form factor (82 × 62mm) makes it ideal for small projects, and the ...

SKU: DF-FIT0179 | Brand: DFRobot

Miniature Single Pole Single Throw switches. These are high quality Omron type B3F momentary on switches. Perfect as a tactile reset switch. Mounts directly into standard bread boards also prototype shield. Rated up t...

SKU: EF-EF08292 | Brand: ElecFreaks

ELECFREAKS micro:bit Smart Cutebot Pro Robot Car Kit is a programming robot for STEAM education, it equips with a 4-way infrared line-following sensor, an encoder motor, the LED rainbow light, an ultrasonic sensor, a...

SKU: EC-CMS01101D | Brand: Elecrow

A 10.1" IPS capacitive touchscreen with 1280 × 800 resolution and a distinctive RGB light strip on the back featuring 27 individually addressable LEDs with 19 animated lighting modes. Compatible with Raspberry Pi 3/3B...

SKU: EF-EF03415 | Brand: ElecFreaks

The sensor:bit is a breakout board for the BBC micro:bit that extends all available I/O ports into standard GVS (Ground-Voltage-Signal) pin headers. This makes it easy to connect 3 V electronic modules like LEDs, phot...

SKU: DF-DFR0154 | Brand: DFRobot

A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...

SKU: SF-ROB-11015 | Brand: SparkFun

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects....

SKU: WS-18995 | Brand: Waveshare

This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple t...

SKU: WS-31536 | Brand: Waveshare

Unleash the full potential of your Raspberry Pi 5 with the cutting-edge PCIe to M.2 Adapter with PoE Function (C). Designed with power users in mind, this highly adaptable expansion board offers seamless integration o...

SKU: WS-22224 | Brand: Waveshare

A sleek 1.47-inch IPS LCD display module with rounded corners, 172×320 resolution, and 262K RGB colours. The ST7789V3 driver communicates via a 4-wire SPI bus, minimising IO pin usage while delivering clear, colourful...

SKU: AF-5384 | Brand: Adafruit

This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latchi...

SKU: LB-MACAW | Brand: Little Bird

The Little Bird Macaw is an RGB LED strip 3 programmable LEDs. This Australian made board uses the WS2812B LED (better known as NeoPixels). This LED strip has a chain-able design means you can hook up several modu...

SKU: LB-BIRDBIT | Brand: Little Bird

This robot is a graphical programming robot for STEM education utilising the simple programming of the micro:bit to achieve great results.   This compact robot is plug and play allowing children to quickly learn...

SKU: LB-LS0823 | Brand: Little Bird

The Micro: bit GPIO T-type Expansion Board is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pin. This breakout board for the micro:b...

SKU: LB-LS0301 | Brand: Little Bird

Soldering Iron Tip Cleaner    There is no water necessary , it can save energy , maintain temperature for the soldering iron to allow for faster work.It cleans better than conventional sponges and wo...

SKU: LB-LR0021 | Brand: Little Bird

High Quality Laser sensor module for Arduino.   Features: Operating Voltage: 5V PCB Size: 15*24 mm Wavelength: 650 nm Depth: 8 mm Height: 24 mm Width: 15 mm Product Weight: 2.2 g

SKU: DF-FIT0111 | Brand: DFRobot

A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or conne...

SKU: LB-LS7008-R | Brand: Little Bird

Bring the drama of game shows, the hype of hackathons, or the focus of “emergency stop” buttons right to your desktop! The Big Game Button is your project’s new MVP — a monster 100mm red button in a tough plastic shel...

SKU: EC-CIL13002M2 | Brand: Elecrow

Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile pho...