Brands

SKU: SF-DEV-11114 | Brand: SparkFun

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so tha...

SKU: AF-189 | Brand: Adafruit

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...

SKU: AF-3174 | Brand: Adafruit

This is a box of ten 25ft spools of solid-core wire. The wire is easy to solder to, and when bent it keeps its shape pretty well. We like to have a few spools of this stuff around which is why this set is quite n...

SKU: AF-449 | Brand: Adafruit

This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...

SKU: SF-PRT-12978 | Brand: SparkFun

A pack of 10 multicoloured alligator-to-alligator clip test leads — an essential for any electronics workbench. Whether you're making quick connections to test a circuit or extending your multimeter leads, these sprin...

SKU: SF-COM-10632 | Brand: SparkFun

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.

SKU: AF-640 | Brand: Adafruit

After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'...

SKU: SF-SEN-10266 | Brand: SparkFun

Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The...

SKU: DF-FIT0484 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses ca...

SKU: SF-PRT-12615 | Brand: SparkFun

A standard full-size solderless breadboard with 830 tie points for prototyping electronic circuits. The two sets of five columns are separated by a 0.3″ channel — perfectly sized for straddling DIP IC packages. Split ...

SKU: SF-COM-09806 | Brand: SparkFun

There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at Little Bird, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob...

SKU: SF-DEV-09718 | Brand: SparkFun

The FTDI Cable is a USB-to-Serial (TTL level) converter that provides a simple way to connect TTL interface devices to USB. Built around the FTDI FT232RQ chip housed in the USB-A connector, this cable operates at 5V l...

SKU: DF-SEN0212 | Brand: DFRobot

The TCS34725 is an I2C RGB colour sensor that detects the red, green, and blue components of light in its environment and returns digital colour values. With high sensitivity, a wide dynamic range, and a built-in IR b...

SKU: AF-4867 | Brand: Adafruit

The Adafruit SCD-30 is a true NDIR (Non-Dispersive Infrared) CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. With an integrated...

SKU: EF-EF08438 | Brand: ElecFreaks

The micro:bit Arcade Pro is a gamepad-style expansion board that transforms your micro:bit V2 into a handheld gaming console. Featuring a vibrant 240×320 TFT colour display, comfortable directional controls, and a bui...

SKU: EC-DIS01835A-3 | Brand: Elecrow

The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction v...

SKU: PH-106133 | Brand: PiHut

The Power Bank KeepAlive (USB-C) prevents power banks from automatically shutting off when connected to low-power devices. It uses a 555 timer circuit to pulse a small amount of current through the USB-C port, keeping...

SKU: LB-LS7240-H | Brand: Little Bird

Introducing the perfect solution for prototyping - our Half-size Permanent Solder Breadboard PCB! With this board, you can easily transfer your circuit from a solderless breadboard to a more permanent solution wi...

SKU: DF-FIT0979 | Brand: DFRobot

##Introduction A dual-fan metal case designed specifically for Raspberry Pi 5, made of aluminum alloy material. It fits perfectly with the Raspberry Pi, providing effective protection for the mainboard. Additionally, ...

SKU: LB-LS5142-40 | Brand: Little Bird

The NEMA17 42BYGH40 Stepper Motor is a robust and reliable solution for precision motion control. With a body size of 42mm x 42mm and a length of 40mm, this stepper motor is widely used in 3D printers, CNC machines, a...