Adafruit Feather RP2040 with DVI Output Port - Works with HDMI
SKU: AF-5710 | Brand: Adafruit
The Feather RP2040 with DVI Output lets you drive an HDMI monitor or television directly from a microcontroller. The on-board HDMI connector outputs digital video (DVI) at 640×480 or 800×480 resolution using the RP204...
Delivered by Mon 23 Nov
Makedo SCRU 180
SKU: MD-B0180 | Brand: Makedo
A bulk top-up pack of 180 Makedo SCRU connectors — the cornerstone of the Makedo cardboard construction system. Each SCRU can connect up to three layers of corrugated cardboard, holding creations together quickly and ...
Delivered by Mon 23 Nov
Gravity: BMM150 Triple Axis Magnetometer Sensor
SKU: DF-SEN0529 | Brand: DFRobot
BMM150 is a low-power and low-noise 3-axis geomagnetic sensor from Bosch for compass applications. It allows measurements of the magnetic field and compass angle in three perpendiculars within a measuring range of ±13...
Delivered by Mon 23 Nov
Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 1mm
SKU: AF-5463 | Brand: Adafruit
This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...
Delivered by Mon 23 Nov
micro:Maqueen Plus V2 - Advanced STEM Education Robot for micro:bit
SKU: DF-MBT0021-EN-18650 | Brand: DFRobot
Maqueen Plus V2 is a STEAM educational robot platform for the micro:bit, made for classroom teaching, after-school projects and robot competitions. It builds on Maqueen Lite and earlier Maqueen Plus robots with a larg...
Delivered by Mon 23 Nov
USB Type C 3.1 PD to 5.5mm Barrel Jack Cable - 9V 5A Output
SKU: AF-5449 | Brand: Adafruit
A USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a 9V DC barrel jack output at up to 5A. The built-in PD sink negotiation chip communicates with your adapter to request 9V o...
Delivered by Mon 23 Nov
micro:Maqueen Lite with Skin - micro:bit Educational Robot Platform
SKU: DF-ROB0148-EN-LB | Brand: DFRobot
This compact STEAM education robot is built around the Maqueen 4.2 core and is designed for children aged 8 and up. It arrives pre-assembled, with the motors, wheels, support wheel, housing and battery holder already ...
Delivered by Mon 23 Nov
HIFI Digital Bluetooth Amplifier-100W*2
SKU: DF-DFR0804 | Brand: DFRobot
Does sound quality matter to you? If Yes, then come to take a look at this HIFI Bluetooth Power Amplifier board! With AM interference suppression and filtering function, the board THD can be as low as 0.1% even when w...
Delivered by Mon 23 Nov
DHT20 - AHT20 Pin Module - I2C Temperature and Humidity Sensor
SKU: AF-5183 | Brand: Adafruit
The DHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought us the DHT22.This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity s...
Delivered by Mon 23 Nov
Adafruit Triple-axis Magnetometer - LIS3MDL
SKU: AF-4479 | Brand: Adafruit
The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...
Delivered by Mon 23 Nov
Adafruit SCD-41 - True CO2 Temperature and Humidity Sensor
SKU: AF-5190 | Brand: Adafruit
The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and ...
Delivered by Mon 23 Nov
2 Megapixels USB Night Camera (with Microphone)
SKU: DF-FIT0730 | Brand: DFRobot
The 2-Megapixel USB Night Camera features a Sony IMX291 sensor with exceptional low-light performance down to 0.0001 Lux. It delivers 1920×1080 video at 30fps (MJPG) and includes a built-in digital microphone that cap...
Delivered by Mon 23 Nov
GPIO Female Socket Riser Header - 2x2 4-pin
SKU: AF-4855 | Brand: Adafruit
A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to...
Delivered by Mon 23 Nov
NodeMcu Lua WIFI Board Based on ESP8266 CP2102 Module
SKU: EC-DPO02102N | Brand: Elecrow
The NodeMCU R2 is a Wi-Fi development board based on the ESP8266 (ESP-12E module), featuring a CP2102 USB-to-UART bridge for reliable programming and debugging. It integrates GPIO, PWM, I2C, 1-Wire, and ADC on a singl...
Delivered by Mon 23 Nov
WiFi Module - ESP8266 (4MB Flash)
SKU: SF-WRL-17146 | Brand: SparkFun
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloa...
Delivered by Mon 23 Nov
LED Flexible Strip Light (Warm White)
SKU: DF-FIT0710 | Brand: DFRobot
This flexible LED strip produces bright, evenly distributed warm white light from 160 LEDs packed into a 50 cm length. Powered by 5 V DC, it can be cut every 5 cm at marked solder points to create custom lengths for a...
Delivered by Mon 23 Nov
Lora RFM95 Shield-915MHZ-V1.1
SKU: EC-ACS95915S | Brand: Elecrow
The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It...
Delivered by Mon 23 Nov
Raspberry Pi 4 x 8 RGB LED Matrix Expansion HAT
SKU: EC-RPA01416L | Brand: Elecrow
This RGB LED HAT adds a 4×8 matrix of individually addressable RGB LEDs to your Raspberry Pi. With 256 brightness levels and 24-bit colour depth (over 16.7 million colours), it's perfect for creating colourful display...
Delivered by Mon 23 Nov
USB Hub Powermanager for RPI Zero
SKU: EC-CEF02096C | Brand: Elecrow
If you want to connect Raspberry Pi which has only one single micro port to various USB, the USB Hub for Raspberry Pi Zero is your right choice. Especially there is no soldering and wires reqiured. The USB Hub for RPI...
Delivered by Mon 23 Nov
Octopus Water level sensor
SKU: EF-EF04094 | Brand: ElecFreaks
The Octopus Water Level Sensor detects water level using exposed parallel traces on the PCB. As the water level rises, more traces are submerged, producing a higher analogue signal output. Compatible with micro:bit (3...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared