Brands

SKU: AF-527 | Brand: Adafruit

Professional-quality wire strippers from Hakko, designed for clean, precise stripping of 20–30 AWG wire. Precision-ground notches strip insulation cleanly without nicking the conductor, and soft rounded grips provide ...

SKU: SF-PRT-12795 | Brand: SparkFun

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...

SKU: AF-3367 | Brand: Adafruit

The Mini USB Microphone is an ultra-compact plug-and-play USB microphone that requires no drivers. Simply plug it into any USB port and start recording immediately. Compatible with Raspberry Pi, laptops, desktops, an...

SKU: SF-COM-09609 | Brand: SparkFun

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The swi...

SKU: DF-FIT0980 | Brand: DFRobot

Keep your Raspberry Pi 5 running cool with this aluminium alloy cooling fan. Designed for the Pi 5's dedicated fan interface, it plugs in directly via a 4-pin JST connector — no complicated setup required. Self-locki...

SKU: LB-1601104 | Brand: Little Bird

USB C to 3.5mm Audio Headphone Jack DAC Adapter OverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headp...

SKU: PI-PIM721 | Brand: Pimoroni

The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...

SKU: LB-00191-20 | Brand: Little Bird

A classroom-ready bulk pack of 20 BBC micro:bit v2.2 boards. Each micro:bit features a built-in speaker, microphone, touch sensor, accelerometer, compass, Bluetooth, and a 5×5 LED matrix — everything students need to ...

SKU: WS-21176 | Brand: Waveshare

A premium aluminium enclosure for the Raspberry Pi 4, featuring a stripe-grooved design on both top and bottom halves that enlarges the heat dissipation area for effective passive cooling. Built-in heatsink pillars ma...

SKU: DF-FIT0701 | Brand: DFRobot

This product is a driver-free camera with 30W pixels and 640*480 resolution. The camera is well compatible with both Raspberry Pi and NVIDIA series mainboards. Just plug it in, and you’re good to go!The compact size o...

SKU: AF-4669 | Brand: Adafruit

Here's one of the easiest capture solutions for getting HDMI data into your computer or Raspberry Pi, really any system with a USB port. Use this capture device to convert a video signal from a camera (or another dev...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: EF-EF08209 | Brand: ElecFreaks

Documents Smart Cutebot kit

SKU: AF-3896 | Brand: Adafruit

A 3-bladed trifoil propeller designed to snap onto standard DC hobby motors. Great for making simple fans, wind-powered experiments, bubble machines, or lightweight propulsion projects. Key Features Snap-On Fit – P...

SKU: DF-DFR0478 | Brand: DFRobot

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which suppo...

SKU: SF-TOL-09325 | Brand: SparkFun

This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder....

SKU: SF-COM-09181 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: AF-592 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: WS-19979 | Brand: Waveshare

The 2-Channel RS232 Module for Raspberry Pi Pico converts UART signals to RS232 and vice versa using the SP3232EEN transceiver. It plugs directly onto the Pico via the onboard female pin header — no wiring required. ...