Brands

SKU: LB-LS6119 | Brand: Little Bird

Introducing the Vertical Wind Generator Wind Turbine-Kit, the perfect DIY project for all ages. This complete set comes with all the materials needed to assemble your very own mini wind turbine. Not only will you have...

SKU: WS-21707 | Brand: Waveshare

A 4G/3G/2G communication HAT for Raspberry Pi featuring the SIM7600G-H module with LTE CAT4 speeds and global band coverage. Connect it to a Raspberry Pi, Jetson Nano, or PC via USB to enable high-speed cellular netwo...

SKU: AF-4090 | Brand: Adafruit

The Adafruit USB C Breakout Board (Downstream Connection) gives you easy access to all the pins on a USB Type-C connector, configured for downstream device use. Two 5.1K resistors on the CC1 pins signal the upstream h...

SKU: DF-DFR0123 | Brand: DFRobot

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, th...

SKU: SF-CAB-10646 | Brand: SparkFun

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. len...

SKU: AF-4236 | Brand: Adafruit

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. ...

SKU: WS-19358 | Brand: Waveshare

A 10-DOF IMU sensor expansion board designed for the Raspberry Pi Pico. Combines a 9-axis ICM20948 motion sensor (gyroscope, accelerometer, magnetometer) with an LPS22HB barometric pressure sensor, all communicating o...

SKU: AF-5820 | Brand: Adafruit

This 500mm long camera cable is specifically designed to work with the Raspberry Pi 5 series. Just plug it into your Pi 5's camera port and then the other end into one of the official Pi Cameras for photo and video jo...

SKU: EC-WRF31501R | Brand: Elecrow

A basic 315MHz RF link kit consisting of a transmitter and receiver module pair. Commonly used for simple wireless remote control, data transmission, and sensor communication between microcontrollers. Works well with ...

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: DF-SEN0308 | Brand: DFRobot

The Gravity Analogue Waterproof Capacitive Soil Moisture Sensor from DFRobot measures soil moisture using capacitive sensing rather than resistive probes, offering significantly better corrosion resistance and longer ...

SKU: AF-4484 | Brand: Adafruit

The Adafruit Mini PiTFT 1.3" is a compact 240×240 pixel IPS colour display that snaps directly onto any Raspberry Pi via the GPIO header. With vibrant colours and excellent viewing angles, it's ideal for adding a user...

SKU: DF-DFR0559 | Brand: DFRobot

The Sunflower Solar Power Manager 5V is a high-efficiency solar power management module designed for 5 V solar panels. It features MPPT (Maximum Power Point Tracking) to maximise solar panel efficiency, and supports d...

SKU: AF-2348 | Brand: Adafruit

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...

SKU: SF-COM-09939 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies f...

SKU: EF-EF08296 | Brand: ElecFreaks

SKU: DF-DFR0946 | Brand: DFRobot

A DC-DC buck-boost converter module that accepts input voltages both higher and lower than the desired output, delivering a stable regulated output up to 5A. Two onboard potentiometers let you set the output voltage a...

SKU: EC-RPA13810C | Brand: Elecrow

I am a Raspberry Pi camera that compatible with any version of Raspberry Pi. I can work with infrared lights, support infrared night vision. Even has the function of focus, you can adjust me to observe objects of diff...

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: SF-ROB-11696 | Brand: SparkFun

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much res...