Brands and Manufacturers

SKU: AF-1260 | Brand: Adafruit

What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ul...

SKU: PI-COM0404 | Brand: Pimoroni

A colourful 30 mm arcade-style pushbutton in blue. With a satisfying 2 mm travel and tactile click, these buttons are ideal for arcade builds, control panels, and interactive projects. Key Features Arcade Style – C...

SKU: LB-BK-SPEAKER | Brand: Little Bird

This bulk pack gives you 20 compact speakers ready for breadboard-based audio experiments, classroom kits and workshops. It is a Little Bird exclusive designed to make simple sound output quick to set up.Each speaker ...

SKU: LB-LS0657 | Brand: Little Bird

A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interfac...

SKU: AF-3923 | Brand: Adafruit

Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires w...

SKU: LB-LR0214-50 | Brand: Little Bird

The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides re...

SKU: LB-LR0400 | Brand: Little Bird

A 1kg straight bar load cell (strain gauge) that converts applied force into a measurable electrical signal. Made from aluminium alloy with four strain gauges in a Wheatstone bridge configuration, this sensor is ideal...

SKU: AF-1468 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: LB-LR0281-9 | Brand: Little Bird

The TrinityPixel WS2812B is a 5-metre waterproof RGB LED strip featuring 30 individually addressable LEDs per metre (150 total). Each LED can be set to any 24-bit colour (8-bit PWM per red, green, and blue channel), g...

SKU: AF-1862 | Brand: Adafruit

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin ...

SKU: DF-DFR0094 | Brand: DFRobot

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy...

SKU: DF-FIT0200 | Brand: DFRobot

This immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank wter.It works quietly with the sound level under 30db. The pump has a filter inside as well as a suct...

SKU: AF-2796 | Brand: Adafruit

The Feather M0 Adalogger is an all-in-one datalogger built around the ATSAMD21G18 ARM Cortex M0 processor, with a built-in MicroSD card holder, native USB, and LiPo battery charging. With 256KB of flash and 32KB of RA...

SKU: SF-COM-00528 | Brand: SparkFun

These are very bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of the intensity. All lenses are clear. Features: 9,000mcd brightness Stand...

SKU: DF-DFR0259 | Brand: DFRobot

Arduino RS485 is an industrial standard for long distance, anti-interferrence and reliable communication. So we create this RS485 Arduino shield, especially designed for the Arduino controller board. It convert...

SKU: DF-DFR0258 | Brand: DFRobot

This RS232 Shield For Arduino is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The RS232 shield integrates DB9 connectors (female) that provide connection to various dev...

SKU: SF-ROB-13302 | Brand: SparkFun

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor als...

SKU: AF-369 | Brand: Adafruit

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The termi...

SKU: SF-DEV-11114 | Brand: SparkFun

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so tha...

SKU: AF-189 | Brand: Adafruit

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...