Brands and Manufacturers

SKU: AF-5708 | Brand: Adafruit

The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. Th...

SKU: DF-DFR0971 | Brand: DFRobot

This 2-Channel I2C DAC module can output a voltage of 0-10V, which is a standard driver in industrial applications. It can be widely used with most 0-10V devices on markets such as light controllers, inverters, valves...

SKU: MD-B0180 | Brand: Makedo

A bulk top-up pack of 180 Makedo SCRU connectors — the cornerstone of the Makedo cardboard construction system. Each SCRU can connect up to three layers of corrugated cardboard, holding creations together quickly and ...

SKU: DF-SEN0529 | Brand: DFRobot

BMM150 is a low-power and low-noise 3-axis geomagnetic sensor from Bosch for compass applications. It allows measurements of the magnetic field and compass angle in three perpendiculars within a measuring range of ±13...

SKU: AF-5463 | Brand: Adafruit

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...

SKU: AF-5449 | Brand: Adafruit

A USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a 9V DC barrel jack output at up to 5A. The built-in PD sink negotiation chip communicates with your adapter to request 9V o...

SKU: DF-FIT0816 | Brand: DFRobot

A compact cooling kit for the Raspberry Pi 3B, 3B+, and 4B featuring an aluminium heatsink with a built-in 9-blade cooling fan. The heatsink surface is designed with slots to maximise heat dissipation, while the fan p...

SKU: DF-FIT0736 | Brand: DFRobot

These hook test clips provide a quick, solder-free way to connect to breakout boards, IC pins, and circuit test points. The set includes 10 wires in 5 colours for easy circuit identification, with silicone-insulated l...

SKU: DF-DFR0804 | Brand: DFRobot

Does sound quality matter to you? If Yes, then come to take a look at this HIFI Bluetooth Power Amplifier board! With AM interference suppression and filtering function, the board THD can be as low as 0.1% even when w...

SKU: DF-DFR0884 | Brand: DFRobot

This dual-USB step-down buck converter accepts 8–32V DC input and delivers a regulated 5V output at up to 3A across two USB Type-A ports simultaneously. With over 85% conversion efficiency and built-in reverse-connect...

SKU: AF-4479 | Brand: Adafruit

The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...

SKU: AF-5190 | Brand: Adafruit

The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and ...

SKU: SF-BOB-16446 | Brand: SparkFun

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and...

SKU: EF-EF08231 | Brand: ElecFreaks

Acrylic Case Characteristic:(1)Bright Colors, bright blue and red make the appearance more beautiful (2)High Hardness,wear-resistant and not easy to break (3)Nice Feel, pocket size and suitable for kid to operate a...

SKU: AF-4855 | Brand: Adafruit

A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to...

SKU: EC-DPO02102N | Brand: Elecrow

The NodeMCU R2 is a Wi-Fi development board based on the ESP8266 (ESP-12E module), featuring a CP2102 USB-to-UART bridge for reliable programming and debugging. It integrates GPIO, PWM, I2C, 1-Wire, and ADC on a singl...

SKU: SF-WRL-17146 | Brand: SparkFun

The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloa...

SKU: DF-FIT0710 | Brand: DFRobot

This flexible LED strip produces bright, evenly distributed warm white light from 160 LEDs packed into a 50 cm length. Powered by 5 V DC, it can be cut every 5 cm at marked solder points to create custom lengths for a...

SKU: AF-4747 | Brand: Adafruit

If you've got a lot of wire-stripping to do, you may want to try out an automatic stripper/cutter! They are fantastic for stripping and cutting stranded and solid-core 24 or thicker AWG wires and ribbon cables. The...

SKU: AF-4755 | Brand: Adafruit

The Adafruit Universal USB/DC/Solar Lithium Ion/Polymer Charger (bq24074) charges 3.7V/4.2V LiPo or LiIon batteries from virtually any power source — USB Type-C, DC adapter, or solar panel — with a wide 5–10V input ra...