Brands and Manufacturers

SKU: AF-4401 | Brand: Adafruit

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching fe...

SKU: LB-PT-M38 | Brand: Little Bird

A compact Bluetooth 4.2 audio receiver module (MH-M18) that streams two-channel stereo audio wirelessly from your phone, tablet, or other Bluetooth device. Once paired, it delivers lossless audio playback with a conne...

SKU: DF-TEL0138 | Brand: DFRobot

Based on a UBX-G7020-KT positioning chip, this USB GPS receiver is designed for low-power, high-sensitivity satellite positioning. It can receive 56-channel satellite signals and is built for faster positioning and st...

SKU: DF-FIT0543 | Brand: DFRobot

A 1.5 m Mini HDMI to standard HDMI cable for connecting devices with a Mini HDMI port to monitors, TVs, and projectors. Gold-plated connectors resist oxidation for reliable, long-lasting connections, and the shielded ...

SKU: LB-LR0024 | Brand: Little Bird

The rotary encoder is an electro-mechanical switch. Its output signal can be used to determine the direction that its knob is being rotated. Not only that, but it is also capable of continuous rotation, unlike a regul...

SKU: DF-DFR0564 | Brand: DFRobot

Still using a big, bulky, traditional power adapter to charge your lithium battery? DFRobot provides you with a compact and efficient 7.4V lithium battery USB charger, only the size and weight of an ordinary Gravit...

SKU: AF-3857 | Brand: Adafruit

The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it i...

SKU: AF-1085 | Brand: Adafruit

Add precision analog-to-digital conversion to any microcontroller with the ADS1115 breakout. This 16-bit ADC delivers 860 samples per second over I2C, with four single-ended or two differential input channels and a bu...

SKU: AF-1186 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, howev...

SKU: LB-LR0555 | Brand: Little Bird

A great little project to help you learn to solder. This DIY heart shaped light up project comes with 18 bright LEDs to solder onto the board. They form a flashing pattern that repeats.  

SKU: LB-LR0214-37 | Brand: Little Bird

Other Features: Voltage: 3V / 5V; Amplification factor: 330; Wavelength: 609nm; A product for Arduino.1 x   Pulse sensor Pulse Heart Rate Sensor Module  

SKU: SF-TOL-09317 | Brand: SparkFun

This is a solderer’s best helper, the third hand. Comes with a heavy base, two alligator clips, a soldering iron holder, and a good magnifying glass. Note that we don’t normally need a third hand. It’s nice, but so...

SKU: SF-BOB-12009 | Brand: SparkFun

The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, ...

SKU: DF-DFR0251 | Brand: DFRobot

A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit. It i...

SKU: SF-DEV-11235 | Brand: SparkFun

The Arduino and Breadboard Holder is a sturdy plastic base plate that keeps your Arduino and breadboard neatly organised during prototyping. The board mounts with two included screws using the standard Arduino mountin...

SKU: SF-ROB-13259 | Brand: SparkFun

These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you ...

SKU: DF-KIT0021 | Brand: DFRobot

A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one d...

SKU: SF-PRT-12794 | Brand: SparkFun

These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pac...

SKU: DF-SEN0189 | Brand: DFRobot

The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended ...

SKU: AF-1950 | Brand: Adafruit

Premium female-to-female jumper wires in a convenient 20-pin ribbon cable, perfect for making wire harnesses or jumpering between headers on PCBs. Each wire is 150mm (6") long with 0.1" (2.54mm) female header contacts...