Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Breadboard to GHR-04V Cable - 4-Pin x 1.25mm Pitch
SKU: SF-CAB-17240 | Brand: SparkFun
This is a handy cable for connecting a four pin GHR-04V type locking connector to breadboard friendly male pins. These cables are already included with the RTK Surveyor product line, but the GHR connector is common an...
Delivered by Mon 7 Sep
USB to TTL Serial Cable (5V VCC)
SKU: SF-CAB-17831 | Brand: SparkFun
This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial p...
Delivered by Mon 7 Sep
SparkFun Qwiic PIR - 170uA (EKMC4607112K)
SKU: SF-SEN-17374 | Brand: SparkFun
Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K Qwiic PIR uses an EKM-series PIR sensor from Panasonic® paired with an ATTiny84 to inter...
Delivered by Mon 7 Sep
SparkFun MicroMod Qwiic Carrier Board - Double
SKU: SF-DEV-17724 | Brand: SparkFun
The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This boa...
Delivered by Mon 7 Sep
SparkFun MicroMod Environmental Function Board
SKU: SF-SEN-18632 | Brand: SparkFun
The SparkFun MicroMod Environmental Function Board adds additional sensing options to the MicroMod Processor Boards. This Function Board includes three sensors to monitor air quality (SGP40), humidity & temperature (S...
Delivered by Mon 7 Sep
SparkFun Qwiic micro:bit Breakout
SKU: SF-BOB-16445 | Brand: SparkFun
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C ...
Delivered by Mon 7 Sep
Arducam Upgraded Camera Pan Tilt Platform
SKU: SF-ROB-18648 | Brand: SparkFun
The Arducam Upgraded Camera Pan Tilt Platform provides a lightweight, sturdy two-axis mount for cameras commonly used with Arduino and Raspberry Pi. Two digital servos deliver smooth pan and tilt movement, while an in...
Delivered by Mon 7 Sep
SparkFun MicroMod WiFi Function Board - DA16200
SKU: SF-WRL-18594 | Brand: SparkFun
The SparkFun MicroMod DA16200 Function Board adds fully integrated Wi-Fi connectivity to any MicroMod project. Built around the DA16200 module with an Arm Cortex-M4F processor, it includes a 40 MHz crystal oscillator,...
Delivered by Mon 7 Sep
SparkFun Qwiic ToF Imager - VL53L5CX
SKU: SF-SEN-18642 | Brand: SparkFun
The SparkFun Qwiic ToF Imager is a state of the art, 64 pixel Time-of-Flight (ToF) 4 meter ranging sensor built around the VL53L5CX from ST. This chip integrates a SPAD array, physical infrared filters, and diffractiv...
Delivered by Mon 7 Sep
RJ45 Female to M12 4 Pin Female Adapter
SKU: DF-FIT0853 | Brand: DFRobot
This M12 to RJ45 Ethernet adapter uses M12 female 4 pin D coded with IP67 waterproof rating, which is impervious to dust and short-term soaking, safe and reliable to use. There are metal shielding layers on the RJ45 p...
Delivered by Mon 7 Sep
Overall Evaluation Board Designed for Raspberry Pi Pico
SKU: WS-20159 | Brand: Waveshare
The Pico-Eval-Board is an overall evaluation solution designed for Raspberry Pi Pico. With 3.5inch 65K colorful LCD display and misc helpful onboard components, this evaluation board allows you to try almost every on...
Delivered by Thu 27 Aug
SX1262 LoRa Node Module for Raspberry Pi Pico, LoRaWAN, EU868 Band
SKU: WS-20682 | Brand: Waveshare
The Pico-LoRa-SX1262-868M is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262, which supports LoRaWAN protocol and EU868 band. It is allowed to connect the TTN, TTS servers through a LoRa gate...
Delivered by Fri 18 Sep
Gravity: Digital 360° Tilt Sensor for Arduino
SKU: DF-DFR0830 | Brand: DFRobot
This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With...
Delivered by Mon 7 Sep
YA-101 Automotive OBD2 Scanner
SKU: LB-LS3216 | Brand: Little Bird
The YA-101 Automotive OBD2 Scanner is a handheld diagnostic tool for monitoring your vehicle's health. Read and clear fault codes, view live data streams, check battery voltage, and verify I/M readiness status — all f...
Delivered by Thu 10 Sep
Iridium/GPS/GLONASS Passive Antenna
SKU: SF-GPS-16838 | Brand: SparkFun
The M1600HCT-P-SMA is a dual-band passive antenna that combines Iridium satellite communication with L1 GNSS reception (GPS and GLONASS) in a single compact unit. Ideal for tracking devices that transmit their positio...
Delivered by Mon 7 Sep
SparkFun MicroMod Asset Tracker Carrier Board
SKU: SF-DEV-17272 | Brand: SparkFun
The SparkFun MicroMod Asset Tracker Carrier Board provides you with a toolkit to monitor and track the location of your assets. Built around the u-blox SARA-R510M8S module, the asset tracker offers Secure Cloud LTE-M ...
Delivered by Mon 7 Sep
SparkFun Qwiic LED Stick - APA102C
SKU: SF-COM-18354 | Brand: SparkFun
The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C. Write to individual LEDs to display a count in binary, or write to the whole strip for cool li...
Delivered by Mon 7 Sep
Little Bird Breakout Nest for Raspberry Pi
SKU: LB-NEST-PI | Brand: Little Bird
The Breakout Nest is a Raspberry Pi breakout board, designed for quick and easy connection to external circuitry. This Raspberry Pi GPIO Breakout board gives you easy access to all GPIO pins and I2C interface. Our bre...
Delivered by Thu 10 Sep
Industrial Grade RS485 Repeater
SKU: DF-FIT0772 | Brand: DFRobot
This is an industrial-grade high-performance RS485 photoelectric isolation repeater that converts one-way RS485 to one-way RS485. Compatible with EIA/TIA RS485 standard, it features asynchronous half-duplex, two-way c...
Delivered by Mon 7 Sep
NeoKey Socket Breakout for Mechanical Key Switches with NeoPixel - For MX Compatible Switches
SKU: AF-4978 | Brand: Adafruit
The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit NeoKey Breakout will let you do! This little 0.75" x 0.85" PCB can fit one Cherry MX ...
Delivered by Fri 18 Sep
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared