Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
SKU: AF-4682 | Brand: Adafruit
The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus wit...
Delivered by Tue 23 Jun
WiFi Module ESP8266 ESP-01
SKU: LB-LR0307 | Brand: Little Bird
Upgraded Version ESP-01,all Flash are upgraded to 1M byte.Also support Cloud service remote transmission.This Upgraded Version module are fully supports the previous firmware The latest firmware version 1.0.1, the ...
Delivered by Tue 23 Jun
Raspberry Pi GPIO Ribbon Cable - 40-pin, 6 (RPi 3, RPi2, B+)
SKU: SF-CAB-13028 | Brand: SparkFun
This 40-pin (2×20) flat ribbon cable connects to the GPIO header on the Raspberry Pi, providing easy access to all GPIO, I2C, SPI, UART, and power pins. The 6-inch (15 cm) length keeps things tidy while giving you roo...
Delivered by Tue 23 Jun
830-Point Breadboard
SKU: PL-352 | Brand: Pololu
This full-size 830-point solderless breadboard provides 63 rows of tie points with four bus lines spanning the full length of the board. It accommodates up to nine 14-pin DIP ICs or seven 16-pin DIP ICs, and labelled ...
Delivered by Tue 23 Jun
RGB LED Module
SKU: LB-LR0013 | Brand: Little Bird
An RGB LED module with a common-cathode full-colour LED and built-in current-limiting resistors for each channel. Control the red, green, and blue channels independently via PWM to mix any colour. Compatible with Ardu...
Delivered by Tue 23 Jun
VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor - GY-530
SKU: LB-LS6503 | Brand: Little Bird
The VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor is an advanced distance sensor module that provides highly accurate distance measurements using infrared laser technology. With a range of up to 2 meters, this com...
Delivered by Tue 23 Jun
NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable
SKU: WS-17693 | Brand: Waveshare
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. NB-IoT/Cat-M(eMTC)/G...
Delivered by Tue 23 Jun
KnockOffDuino MEGA 2560
SKU: LB-LR0065 | Brand: Little Bird
The KnockOffDuino MEGA is a budget-friendly, fully Arduino MEGA 2560 R3-compatible development board. It features the same ATmega2560 microcontroller, pinout, and form factor as the original, making it a cost-effectiv...
Delivered by Tue 23 Jun
Water Sensor for Arduino
SKU: LB-LR0043 | Brand: Little Bird
A simple analogue water sensor that detects the presence and relative level of water on its surface. The sensor outputs a higher analogue value as more water covers the sensing traces, making it useful as a basic wate...
Delivered by Tue 23 Jun
Momentary Button - Panel Mount (Black)
SKU: SF-COM-11996 | Brand: SparkFun
A small, panel-mount momentary push button in black. This SPST normally-open switch is ideal for basic on/off functions in electronics projects, control panels, and prototypes. The threaded barrel mounts through a 6....
Delivered by Tue 23 Jun
Breadboard - Translucent Self-Adhesive (Clear)
SKU: SF-PRT-09567 | Brand: SparkFun
Ever wonder what goes on inside these things? Well this clear bread board might enlighten. Beyond the clear plastic, this is really just a regular, solderless breadboard. It has 2 power buses, 30 columns, and 10 rows ...
Delivered by Tue 23 Jun
Aluminum Case for Raspberry Pi 4 (with Heatsink Fan)
SKU: DF-FIT0697 | Brand: DFRobot
An aluminium alloy enclosure for the Raspberry Pi 4, bundled with a cooling fan and heatsinks for effective thermal management. The hollow design promotes airflow while the aluminium construction acts as a passive hea...
Delivered by Tue 23 Jun
4-digit 8-segment Display Module for Raspberry Pi Pico, SPI-compatible
SKU: WS-19806 | Brand: Waveshare
A compact 4-digit 8-segment red LED display module designed for the Raspberry Pi Pico. It plugs directly onto the Pico via an onboard female pin header and communicates over an SPI-compatible interface driven by an em...
Delivered by Tue 23 Jun
Raspberry Pi GPIO Expansion Extension Board Screw Terminal Hat
SKU: LB-LS7233 | Brand: Little Bird
Upgrade your Raspberry Pi experience with our GPIO Expansion Extension Board Screw Terminal Hat! This beautifully designed screw terminal expansion version is the perfect addition to your electronic experiments. Conve...
Delivered by Tue 23 Jun
USB GPS Receiver
SKU: DF-TEL0137 | Brand: DFRobot
This GPS receiver brings much more accurate and faster positioning performance with stronger signal compared with traditional GPS receivers. It is compact, lightweight and portable. Integrated with built-in receivin...
Delivered by Tue 23 Jun
SX1278 LoRa Module 433M 10KM Ra-02 Wireless Spread Spectrum Transmission Socket for Smart Home DIY
SKU: EC-ALR00002A | Brand: Elecrow
Ra-02 is a wireless transmission module based on SEMTECH's SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of a...
Delivered by Tue 23 Jun
4K HDMI to Micro HDMI Cable
SKU: DF-FIT0648 | Brand: DFRobot
An 80 cm micro-HDMI to standard HDMI cable supporting 4K resolution, designed for the Raspberry Pi 4B and other devices with micro-HDMI output. Gold-plated connectors and 19-core shielding ensure reliable, stable sign...
Delivered by Tue 23 Jun
iot:bit for micro:bit
SKU: EF-EF03426 | Brand: ElecFreaks
IOT:bit is an expansion board based on IoT for micro:bit. It uses ESP8266 as WIFI expansion board and serial port to communicate with micro:bit. It also has extended all available IO port of the micro:bit which is lea...
Delivered by Tue 23 Jun
Joystick:bit v2 for micro:bit
SKU: EF-EF03417 | Brand: ElecFreaks
Joystick:bit V2 is a JoyStick based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons as as classic JoyStick. At the same time, with the board buzzer and vibration motor, it also enhance game...
Delivered by Tue 23 Jun
GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3 [Extra-long 2x20 Pins]
SKU: AF-2223 | Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall, good for small HATs that do not to clear t...
Delivered by Tue 23 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
