Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
SparkFun LED RingCoder Breakout - RGB
SKU: SF-BOB-11040 | Brand: SparkFun
The SparkFun LED RingCoder Breakout provides a visual position indicator for rotary encoders. Two 8-bit shift registers drive a circular LED bargraph that displays the virtual position of the encoder as it turns, givi...
Delivered by Thu 18 Jun
16x8 1.2 LED Matrix + Backpack - Ultra Bright Round Blue LEDs
SKU: AF-2039 | Brand: Adafruit
A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" blue 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA and...
Delivered by Wed 8 Jul
SRF05 ultrasonic sensor
SKU: DF-SEN0006 | Brand: DFRobot
The latest model SRF05 Detection range of 3 cm from the original SRF04 -3 m, increased to 1 cm -4 meters. RF04 is compatible with the original. Also has smaller side lobes. Ultrasonic module can be used to identi...
Delivered by Mon 29 Jun
SRF02 ultrasonic sensor
SKU: DF-SEN0005 | Brand: DFRobot
This low cost SFR02 ultrasonic ranger has both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, aut...
Delivered by Mon 29 Jun
Arduino Mega 2560 Rev3
SKU: DF-DFR0108 | Brand: DFRobot
The Arduino Mega 2560 Rev3 is a microcontroller board based on the ATmega2560, offering significantly more I/O than standard Arduino boards. With 54 digital I/O pins, 16 analog inputs, and 4 hardware serial ports, it'...
Delivered by Mon 29 Jun
SRF10 - The Worlds Smallest Dual Transducer Ultrasonic Ranger
SKU: DF-SEN0008 | Brand: DFRobot
This small sonar ranger from Devantech offers an amazing wide range from 3cm to 6m. The SRF10 is interfaced using the IIC bus. SPECIFICATIONS Voltage-5v Current-15mA Typ. 3mA Standby Frequenc...
Delivered by Mon 29 Jun
Pololu Basic SPDT Relay Carrier with 5VDC Relay (Partial Kit)
SKU: PL-2481 | Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5L...
Delivered by Thu 18 Jun
XBoard V2 -A Bridge Between Home And Internet (Arduino Compatible)
SKU: DF-DFR0162 | Brand: DFRobot
This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a...
Delivered by Thu 18 Jun
USB-RLY16L(16 Low Power 8 channel relay outputs at 16A)
SKU: DF-DFR0173 | Brand: DFRobot
A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The relays are SPCO (Single ...
Delivered by Mon 29 Jun
QTR-L-1A Reflectance Sensor (2-Pack)
SKU: PL-2454 | Brand: Pololu
The QTR-L-1A reflectance sensor incorporates a right-angle infrared LED and a right-angle phototransistor in an inexpensive, tiny 0.35″ × 0.3″ module that can be mounted almost anywhere and is great for e...
Delivered by Thu 18 Jun
SparkFun Photo Interrupter Breakout Board - GP1A57HRJ00F
SKU: SF-BOB-09322 | Brand: SparkFun
A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three connections for PWR, GND, and Signal.When the gate is clear, SIG will be high (>...
Delivered by Mon 29 Jun
SparkFun Wireless Motor Driver Shield
SKU: SF-DEV-14285 | Brand: SparkFun
The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield i...
Delivered by Mon 29 Jun
Gravity: Arduino Propane Gas Sensor (MQ6)
SKU: DF-SEN0131 | Brand: DFRobot
INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes an...
Delivered by Mon 29 Jun
Ultrasonic Scanner kit(180°)
SKU: DF-KIT0020 | Brand: DFRobot
An Ultrasonic sensor with scan capability is a must have feature for most robot application. This Ultrasonic scanner kit provides a cost effective way to have such feature for your robot application. This kit is...
Delivered by Thu 18 Jun
Arduino Industrial 101
SKU: SF-DEV-14134 | Brand: SparkFun
The Arduino Industrial 101 is a compact WiFi evaluation board based on the Arduino 101 LGA module. Combining an ATmega32U4 microcontroller with an Atheros AR9331 MIPS Linux processor, it provides a powerful platform f...
Delivered by Thu 18 Jun
LIDAR-Lite v3
SKU: SF-SEN-14032 | Brand: SparkFun
It’s back! This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requirements are tight, the LIDAR-Lite v3 soars. The LIDAR-Lite v3 is the ideal...
Delivered by Mon 29 Jun
The Laser Photoelectric Switch GAB100M-AK-5V
SKU: DF-FIT0319 | Brand: DFRobot
This is a photoelectric switch that is composed of emitter and receptor.The emitter consists of a laser diode,and the laser has the characteristics of high precision, good orientation etc.The receptor consists of a p...
Delivered by Mon 29 Jun
Graphic LCD 128x64 STN LED Backlight
SKU: SF-LCD-00710 | Brand: SparkFun
A framed 128 × 64 pixel graphical LCD with LED backlight. This STN-type display provides clear, high-contrast graphics and text output using the widely supported KS0108B parallel interface chipset. The module includes...
Delivered by Mon 29 Jun
SparkFun RedBot Sensor - Line Follower
SKU: SF-SEN-11769 | Brand: SparkFun
The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measurin...
Delivered by Thu 18 Jun
SparkFun RedStick
SKU: SF-DEV-13741 | Brand: SparkFun
In 2015 we developed the BadgerStick as a fun and interactive way for people to learn about soldering and engage with SparkFun products at the multiple trade shows we appeared at. In 2016 we have refined the BadgerSti...
Delivered by Thu 18 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
