Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board
SKU: AF-4832 | Brand: Adafruit
The Adafruit HTU31 is a third-generation I²C temperature and humidity sensor from TE, offering improved accuracy and useful extras over its predecessor, the HTU21D. With typical humidity accuracy of ±2% (at 20–100% RH...
Delivered by Wed 4 Nov
Adafruit AHT20 - Temperature Humidity Sensor Breakout Board - STEMMA QT / Qwiic
SKU: AF-4566 | Brand: Adafruit
The Adafruit AHT20 is an affordable I2C temperature and humidity sensor from the makers of the popular DHT22. It delivers reliable readings with standard I2C communication, making it easy to use with any Arduino, Rasp...
Delivered by Wed 4 Nov
STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear
SKU: AF-4493 | Brand: Adafruit
For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching JST PH 3-Pin to Male Header Cables - 200mm,...
Delivered by Wed 4 Nov
Adafruit eInk Feather Friend with 32KB SRAM
SKU: AF-4446 | Brand: Adafruit
The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect you...
Delivered by Wed 4 Nov
Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT
SKU: AF-4161 | Brand: Adafruit
The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all ove...
Delivered by Wed 4 Nov
SparkFun Nano Power Timer - TPL5110
SKU: SF-PRT-15353 | Brand: SparkFun
Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project...
Delivered by Tue 13 Oct
USB/TTL Raspberry Pi GPS Tracker
SKU: DF-TEL0119 | Brand: DFRobot
The USB/TTL Raspberry Pi GPS Tracker is a compact GPS location module built around the L80-39 chip. With 66 search channels and 22 simultaneous tracking channels, it delivers fast satellite acquisition and reliable po...
Delivered by Thu 22 Oct
SparkFun Motor Driver - Dual TB6612FNG (with Headers)
SKU: SF-ROB-14450 | Brand: SparkFun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-bra...
Delivered by Thu 22 Oct
Pulse Sensor Amped
SKU: AF-1093 | Brand: Adafruit
Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles. It can be used by students, artists, athletes, makers, and game & m...
Delivered by Wed 4 Nov
INA169 Analog DC Current Sensor Breakout - 60V 5A Max
SKU: AF-1164 | Brand: Adafruit
This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chip on this breakout to both measure both the DC current draw and have a...
Delivered by Wed 4 Nov
Standalone Momentary Capacitive Touch Sensor Breakout [AT42QT1010]
SKU: AF-1374 | Brand: Adafruit
This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...
Delivered by Wed 4 Nov
AM2320 Digital Temperature and Humidity Sensor
SKU: PI-COM1700 | Brand: Pimoroni
The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors an...
Delivered by Tue 13 Oct
Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2
SKU: AF-3709 | Brand: Adafruit
The Adafruit SGP30 is a multi-pixel MOX (metal-oxide) gas sensor from Sensirion that measures Total Volatile Organic Compounds (TVOC) and equivalent CO2 (eCO2) for indoor air quality monitoring. With fully calibrated ...
Delivered by Wed 4 Nov
Gravity: Analog Sound Level Meter
SKU: DF-SEN0232 | Brand: DFRobot
The Gravity Analog Sound Level Meter is an Arduino-compatible decibel meter that accurately measures environmental noise levels. It uses an instrumentation-grade circuit with a low-noise microphone for high-precision ...
Delivered by Thu 22 Oct
VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max
SKU: PL-2490 | Brand: Pololu
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for rangi...
Delivered by Tue 13 Oct
Light Sensor - BH1750
SKU: DF-SEN0097 | Brand: DFRobot
This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This is a more acurate and easier ...
Delivered by Thu 22 Oct
USB Serial Light Adapter - Atmega8U2 (Arduino Compatible)
SKU: DF-DFR0164 | Brand: DFRobot
This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no ...
Delivered by Tue 13 Oct
SparkFun Voltage-Level Translator Breakout - TXB0104
SKU: SF-BOB-11771 | Brand: SparkFun
This is a breakout board for the Texas Instruments TXB0104 module. The TXB0104 is a 4-bit bidirectional voltage-level translator with automatic direction sensing. This 4-bit noninverting translator uses two separate...
Delivered by Thu 22 Oct
Adafruit RFM69HCW Transceiver Radio Breakout - 868 or 915 MHz
SKU: AF-3070 | Brand: Adafruit
The Adafruit RFM69HCW Transceiver Radio Breakout @ 868/915 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX12...
Delivered by Wed 4 Nov
SparkFun Level Shifting microSD Breakout
SKU: SF-DEV-13743 | Brand: SparkFun
The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD...
Delivered by Thu 22 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared