Brands and Manufacturers

SKU: AF-904 | Brand: Adafruit

This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC...

SKU: AF-5811 | Brand: Adafruit

This compact breakout gives you a high-resolution analogue voltage output from a simple I2C interface, based on the AD5693R 16-bit DAC. It includes a temperature-compensated 2.5V internal reference, making it a handy ...

SKU: EC-SMI3231DS | Brand: Elecrow

DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. Compared to the DS1302 solution, the DS3231 has many advantages, it...

SKU: AF-815 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from you...

SKU: PI-PIM722 | Brand: Pimoroni

The PGA2350 is a minimal but powerful RP2350B breakout board in a Pin Grid Array format, cramming the maximum number of exposed pins into the smallest possible space. At just 25.4 × 25.4 mm, it's designed to be embedd...

SKU: AF-4816 | Brand: Adafruit

The BMP390 from Bosch (also known as BMP390L) is a high-precision barometric pressure and temperature sensor, offering the best altitude accuracy in the Bosch pressure sensor lineup. With relative accuracy of ±3 Pasca...

SKU: PR-PIM366 | Brand: Little Bird

A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Arduino.It...

SKU: AF-5879 | Brand: Adafruit

The Adafruit UPDI Friend is a compact USB serial programmer for ATtiny microcontrollers that use the UPDI (Unified Program and Debug Interface) protocol. Built around the CH340E USB serial converter with USB Type-C, i...

SKU: PI-PSA001 | Brand: Pimoroni

The Pulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino. It detects pulse by measuring changes in reflected light as blood pumps through your tissues, providing a real-time analogue signal that fluctua...

SKU: PL-2453 | Brand: Pololu

A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up to ±31 A with a proportional analogue voltage output centred...

SKU: AF-5628 | Brand: Adafruit

A compact, self-centering analogue thumbstick with a feel and size similar to Nintendo Joy-Con joysticks. It uses two 10kΩ potentiometers (one for each axis) to provide proportional X/Y analogue output, plus a centre-...

SKU: AF-1935 | Brand: Adafruit

That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly sma...

SKU: AF-5989 | Brand: Adafruit

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...

SKU: AF-4868 | Brand: Adafruit

The Adafruit 1.54" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 200×200 pixel display with black, red, and white ink, this breakout delivers high-contrast, d...

SKU: EC-WIS00975M | Brand: Elecrow

The Smart IR Module is a compact infrared transceiver board designed for IoT remote control projects. With four IR transmitters arranged for 360° coverage and an integrated IR receiver, it allows you to learn remote c...

SKU: FT-LEVEL | Brand: Freetronics

Many of the most interesting sensors and devices are only available in 3.3V or even lower voltage versions, which can be a problem if you want to connect them to a 5V microcontroller such as an Arduino. This module...

SKU: AF-1431 | Brand: Adafruit

A 1.5" colour OLED breakout with 128×128 RGB pixels and 16-bit colour depth, driven by the SSD1351 controller. Because it uses OLED technology, there is no backlight — blacks are truly black with excellent contrast. T...

SKU: AF-1918 | Brand: Adafruit

An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...

SKU: WS-29207 | Brand: Waveshare

Revolutionize Your Robotics and Drones with the 10-Axis ROS IMU SensorDive into Dynamic Orientation and Precision with Our State-of-the-Art SensorTransform your robotic creations into masterpieces of precision and agi...

SKU: AF-6065 | Brand: Adafruit

The Adafruit CP2105 Friend provides two independent UART serial ports from a single USB-C connection — no USB hub required. Built around the Silicon Labs CP2105 dual-port bridge, it enumerates as two separate COM port...