Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART
SKU: DF-DFR1103 | Brand: DFRobot
##Introduction The Gravity GNSS Positioning & Timing Module integrates satellite positioning functionality and a real-time clock (RTC). The module automatically obtains satellite time based on a preset calibration per...
Delivered by Thu 3 Sep
Gravity: CAN to TTL Communication Module with SLCAN Protocol
SKU: DF-TEL0150 | Brand: DFRobot
##Introduction This is a CAN-to-UART and USB 1.0 communication module that is compatible with both 3.3V and 5V. It supports the CAN 2.0 protocol and incorporates the SLCAN command, eliminating the need for you to conc...
Delivered by Thu 3 Sep
Adafruit LPS28 (LPS28DFW) Pressure Sensor - STEMMA QT / Qwiic
SKU: AF-6067 | Brand: Adafruit
The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...
Delivered by Wed 16 Sep
Adafruit INA3221 - Triple 0-26 VDC, ±3.2 Amp Power Monitor
SKU: AF-6062 | Brand: Adafruit
The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...
Delivered by Wed 16 Sep
Gravity: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)
SKU: DF-SEN0617 | Brand: DFRobot
The Gravity BME688 is an advanced MEMS environmental sensor from Bosch that measures temperature, humidity, barometric pressure, and volatile organic compounds (VOC) in a single compact module. It supports both I²C an...
Delivered by Thu 3 Sep
Gravity: Thin-film Pressure Sensor for Pressure Science Course
SKU: DF-SEN0616 | Brand: DFRobot
The Gravity: Thin-film Pressure Sensor measures pressure through the deformation of a flexible film material. As pressure increases, the film deforms, producing higher analog output values, while lighter pressure resu...
Delivered by Thu 3 Sep
SparkFun Ultrasonic Distance Sensor - TCT40 (Qwiic)
SKU: SF-SEN-24805 | Brand: SparkFun
The SparkFun Qwiic Ultrasonic Distance Sensor, a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm. This sensor is designed to seaml...
Delivered by Thu 3 Sep
Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout
SKU: AF-5970 | Brand: Adafruit
The Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout detects IR signals across a wide frequency range of 20–60 KHz, making it perfect for "code learning" applications where you need your device to work...
Delivered by Wed 16 Sep
Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic
SKU: AF-5964 | Brand: Adafruit
The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...
Delivered by Wed 16 Sep
Adafruit ADG728 1-to-8 Analog Matrix Switch
SKU: AF-5899 | Brand: Adafruit
The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...
Delivered by Wed 16 Sep
Adafruit TSC2046 SPI Resistive Touch Screen Controller
SKU: AF-5767 | Brand: Adafruit
The Adafruit TSC2046 is an SPI resistive touch screen controller that offloads touch reading from your microcontroller. Instead of tying up analog pins and constantly polling, the TSC2046 handles all touch sensing ove...
Delivered by Wed 16 Sep
Adafruit ANO Rotary Navigation Encoder to I2C Stemma QT Adapter
SKU: AF-5740 | Brand: Adafruit
This STEMMA QT adapter makes the ANO rotary navigation encoder easy to use over I2C — no GPIO-heavy wiring needed. An on-board microcontroller running Adafruit's seesaw firmware tracks all rotary pulses and button pre...
Delivered by Wed 16 Sep
AGS02MA I2C TVOC Gas Sensor
SKU: AF-5593 | Brand: Adafruit
The AGS02MA is a compact MOX-based TVOC (Total Volatile Organic Compounds) gas sensor with an I2C interface. It features a built-in ADC that outputs gas resistance and parts-per-billion (ppb) readings — higher ppb val...
Delivered by Wed 16 Sep
Adafruit LTR-329 Light Sensor - STEMMA QT / Qwiic
SKU: AF-5591 | Brand: Adafruit
The Adafruit LTR-329 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configura...
Delivered by Wed 16 Sep
SparkFun PIR Breakout Starter Kit (170uA)
SKU: SF-KIT-19519 | Brand: SparkFun
The SparkFun 170uA PIR Breakout Starter Kit comes with everything you need to get started using Passive Infrared (PIR) sensors. PIR sensors are great for detecting motion in a small area around the sensor. The 170µA S...
Delivered by Thu 3 Sep
Intelligent Rain Detection Module
SKU: DF-SEN0545 | Brand: DFRobot
This smart rain sensor offers a fast way to detect rainfall change on glass in real-time free from effects like sunlight, dust, leaves, etc., and feeds back information (no rain, light rain, moderate rain, or heavy ra...
Delivered by Thu 3 Sep
Adafruit 1.47" 320x172 Round Rectangle Color IPS TFT Display
SKU: AF-5393 | Brand: Adafruit
The Adafruit 1.47" 320×172 Round Rectangle Colour IPS TFT Display features a distinctive rounded-corner design at 250 PPI, driven by the ST7789 controller over SPI. The rounded corners are achieved by masking corner p...
Delivered by Wed 16 Sep
Fermion: SHT31-F Digital Temperature & Humidity Sensor (Breakout)
SKU: DF-SEN0332 | Brand: DFRobot
This Digital Temperature & Humidity Sensor Breakout Board is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap...
Delivered by Thu 3 Sep
6-in-1 USB to Serial Converter
SKU: DF-FIT0781 | Brand: DFRobot
A versatile USB-to-serial converter module supporting six conversion modes: USB-TTL, USB-232, USB-485, TTL-232, TTL-485, and 232-485. Switch between modes using onboard DIP switches — no need for multiple adapters. B...
Delivered by Thu 3 Sep
Adafruit LPS25 Pressure Sensor - STEMMA QT / Qwiic
SKU: AF-4530 | Brand: Adafruit
The Adafruit LPS25 Pressure Sensor Breakout features the ST LPS25HB — an absolute barometric pressure sensor that measures atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude estimation,...
Delivered by Wed 16 Sep
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared