Brands and Manufacturers

SKU: EC-CRF1356KIT | Brand: Elecrow

This RFID kit includes a 13.56M RF reader module, which use the RC522 IC, plus 2 S50 RFID cards to help you learn and add the 13.56 MHz RF transition to your project. The MF RC522 is a highly integrated transmission m...

SKU: WS-19343 | Brand: Waveshare

A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — ...

SKU: AF-3421 | Brand: Adafruit

The Adafruit I2S MEMS Microphone Breakout features the SPH0645LM4H, a tiny digital MEMS microphone with a purely digital I2S output. Unlike analogue electret microphones, this mic sends digital audio data directly to ...

SKU: AF-4682 | Brand: Adafruit

The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus wit...

SKU: WS-7965 | Brand: Waveshare

A USB to TTL serial adapter cable with an embedded PL2303 converter chip. This 1-metre cable provides a simple way to add serial communication to your projects, connecting a standard USB-A port to 3.3V TTL-level UART ...

SKU: WS-19358 | Brand: Waveshare

A 10-DOF IMU sensor expansion board designed for the Raspberry Pi Pico. Combines a 9-axis ICM20948 motion sensor (gyroscope, accelerometer, magnetometer) with an LPS22HB barometric pressure sensor, all communicating o...

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: PI-PIM721 | Brand: Pimoroni

The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...

SKU: SF-WRL-20168 | Brand: SparkFun

The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management ...

SKU: DF-DFR1096 | Brand: DFRobot

The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point...

SKU: DF-FIT0800 | Brand: DFRobot

A compact amphibious micro submersible pump perfect for building small fountains, automated plant watering systems, and DIY water projects. Powered by 3–6V DC, it features low noise operation, high efficiency, and eas...

SKU: PI-PIM726 | Brand: Pimoroni

A top of the line Pirate-brand RP2350 microcontroller with all the goodies - 16MB of flash, 8MB of PSRAM, USB-C, Qw/ST and 2.4GHz wireless / Bluetooth.We adore the versatility and value of Raspberry Pi Pico but we als...

SKU: AF-5933 | Brand: Adafruit

The Adafruit ESP32-C6 Feather is built around Espressif's first Wi-Fi 6 SoC, combining 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 (Zigbee/Thread) in a single chip. The addition of 802.15.4 support makes it well-s...

SKU: WS-13460 | Brand: Waveshare

NOTE: This product is only 2G Compatible! Unfortunately while there are still 2G networks in some parts of America and Europe, there are no longer 2G networks in Australia anymore.Prohibited by the module manufact...

SKU: AF-659 | Brand: Adafruit

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tut...

SKU: WS-24580 | Brand: Waveshare

RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor RP2040-Touch-LCD-1.28 Based on Raspberry Pi RP2040 ...

SKU: AF-5400 | Brand: Adafruit

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provid...

SKU: AF-3405 | Brand: Adafruit

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converte...

SKU: DF-DFR0473 | Brand: DFRobot

Introducing the Gravity Digital Relay Module - the latest addition to DFRobot's Gravity series! This module is a little different to the other relays in our store - not only is it compatible with 5V Arduino boards, bu...

SKU: PI-PIM724 | Brand: Pimoroni

A top of the line Pirate-brand RP2350 microcontroller with 16MB of flash memory, 8MB of PSRAM, USB-C, Qw/ST and debug connectors.We adore the versatility and value of Raspberry Pi Pico but we also enjoy a souped up RP...