Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit AirLift Bitsy Add-On – ESP32 WiFi Co-Processor
SKU: AF-4363 | Brand: Adafruit
Give your ItsyBitsy project WiFi connectivity with the Adafruit AirLift Bitsy Add-On. This compact daughterboard uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL ...
Delivered by Fri 28 Aug
Adafruit 1.3 240x240 Wide Angle TFT LCD Display with MicroSD - ST7789
SKU: AF-4313 | Brand: Adafruit
The Adafruit 1.3" 240×240 Wide Angle TFT LCD Display Breakout with MicroSD is a compact, high-density IPS screen driven by the ST7789 controller. With 240×240 pixels at 260 PPI in full 16-bit colour, it delivers sharp...
Delivered by Fri 28 Aug
Adafruit AirLift Shield - ESP32 WiFi Co-Processor
SKU: AF-4285 | Brand: Adafruit
Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...
Delivered by Fri 28 Aug
Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor
SKU: AF-4264 | Brand: Adafruit
Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your...
Delivered by Fri 28 Aug
SparkFun TFT LCD Breakout - 1.8 (128x160)
SKU: SF-LCD-15143 | Brand: SparkFun
The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia fi...
Delivered by Mon 17 Aug
Adafruit Metro M4 Express AirLift (WiFi) - Lite
SKU: AF-4000 | Brand: Adafruit
The Adafruit Metro M4 Express AirLift combines the powerful ATSAMD51J19 ARM Cortex M4 processor with an on-board ESP32 WiFi co-processor — all in the standard Metro/UNO shield-compatible form factor. With 120 MHz cloc...
Delivered by Fri 28 Aug
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
SKU: AF-4201 | Brand: Adafruit
Give any microcontroller WiFi connectivity with the Adafruit AirLift Breakout. This board uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...
Delivered by Fri 28 Aug
Adafruit eInk Breakout Friend with 32KB SRAM
SKU: AF-4224 | Brand: Adafruit
The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite displa...
Delivered by Fri 28 Aug
Adafruit HalloWing M0 Express
SKU: AF-3900 | Brand: Adafruit
The Adafruit HalloWing M0 Express is a skull-shaped development board built around the ATSAMD21G18 processor. Featuring a 1.44" full-colour TFT display, a 3-axis accelerometer, a light sensor, a speaker driver, and Fe...
Delivered by Fri 28 Aug
Raspberry Pi 3 - Model B+ - 1.4GHz Cortex-A53 with 1GB RAM
SKU: AF-3775 | Brand: Adafruit
The Raspberry Pi 3 Model B is the most popular Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 3 better? How about a faster processor...
Delivered by Fri 28 Aug
Adafruit DragonTail for micro:bit - Fully Assembled
SKU: AF-3695 | Brand: Adafruit
The Adafruit DragonTail for micro:bit breaks out all of the micro:bit's edge connector pads to standard 0.1" headers for easy breadboard use. Simply slot your micro:bit into the card-edge connector and every pin — inc...
Delivered by Fri 28 Aug
Realtek Ameba-RTL8195AM WiFi NFC Module wireless remote control/ telecontrol: Gravity: 315MHz RF Receiver Module
SKU: DF-DFR0477 | Brand: DFRobot
The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and Micr...
Delivered by Mon 17 Aug
Adafruit TFT FeatherWing - 3.5 480x320 Touchscreen for Feathers
SKU: AF-3651 | Brand: Adafruit
The Adafruit TFT FeatherWing is a 3.5" colour display with a 480×320 resolution, bright 6-LED white backlight, and a built-in resistive touchscreen. It plugs directly into any Adafruit Feather board, giving you a high...
Delivered by Fri 28 Aug
Adafruit RFM69HCW Transceiver Radio Bonnet - 868 or 915 MHz - RadioFruit
SKU: AF-4072 | Brand: Adafruit
The Adafruit RFM69HCW Transceiver Radio Bonnet @ 868/915 MHz adds sub-GHz packet radio to your Raspberry Pi. Plug it onto the GPIO header and communicate with remote sensor nodes over distances of up to 500 m (line of...
Delivered by Fri 28 Aug
SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)
SKU: SF-GPS-15136 | Brand: SparkFun
With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...
Delivered by Mon 17 Aug
Adafruit LoRa Radio Bonnet with OLED - RFM95W @ 915MHz - RadioFruit
SKU: AF-4074 | Brand: Adafruit
Add long-range LoRa radio to your Raspberry Pi with the Adafruit LoRa Radio Bonnet. This plug-in board pairs an SX1276-based RFM95W LoRa transceiver with a 128×32 OLED display and three user buttons, giving you a comp...
Delivered by Fri 28 Aug
Adafruit Grand Central M4 Express featuring the SAMD51
SKU: AF-4064 | Brand: Adafruit
The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Ar...
Delivered by Fri 28 Aug
OLED Breakout Board - 16-bit Color 0.96 w/microSD holder
SKU: AF-684 | Brand: Adafruit
We love our black and white monochrome displays but we also like to dabble with some color now and then. Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-...
Delivered by Fri 28 Aug
Adafruit NeoTrellis M4 with Enclosure and Buttons Kit Pack
SKU: AF-4020 | Brand: Adafruit
Everything you need to get started with the NeoTrellis M4 in one kit. This pack bundles the NeoTrellis M4 Mainboard, an acrylic enclosure, silicone elastomer button pads, and rubber feet — ready to assemble into a com...
Delivered by Fri 28 Aug
SparkFun Triple Axis Accelerometer Breakout - H3LIS331DL
SKU: SF-SEN-14480 | Brand: SparkFun
The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes, the H3LIS331DL is great for ...
Delivered by Mon 17 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared