Brands and Manufacturers

SKU: PL-3101 | Brand: Pololu

The Pololu A-Star 32U4 Micro is a general-purpose programmable module based on the ATmega32U4 AVR microcontroller from Microchip. It packs 32 KB of flash, 2.5 KB of RAM, and built-in USB into a tiny 1″ × 0.6″ DIP pack...

SKU: DF-SEN0192 | Brand: DFRobot

INTRODUCTION The microwave sensor applies the Doppler effect to detect moving objects using microwaves. This differs from the method used by a regular infrared (IR) sensor as microwave is...

SKU: SF-ROB-12629 | Brand: SparkFun

The DAGU Wheel Encoder Kit is a simple add-on for wheeled robots that measures speed and distance travelled. Each kit includes two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors, providing relia...

SKU: SF-SEN-12617 | Brand: SparkFun

Knowing where your robot is can be very important! The RedBot Wheel Encoder allows you to track the number of revolutions each wheel has made. This sensor works by detecting the movement of small teeth connected to a ...

SKU: SF-DEV-09713 | Brand: SparkFun

The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard frien...

SKU: AF-5778 | Brand: Adafruit

The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compa...

SKU: SB-PICO-RELAY | Brand: Little Bird

The Pico 3V Relay HAT is a two-channel relay board designed for the Raspberry Pi Pico. It stacks directly onto the Pico via a female pin header for a clean, compact connection. Operating at 3.3V, it allows the Pico to...

SKU: PI-PIM722 | Brand: Pimoroni

The PGA2350 is a minimal but powerful RP2350B breakout board in a Pin Grid Array format, cramming the maximum number of exposed pins into the smallest possible space. At just 25.4 × 25.4 mm, it's designed to be embedd...

SKU: PR-PIM542 | Brand: Little Bird

A super-simple, slimline way to hook up a hi-fi amp or powered speakers to your Raspberry Pi! Output punchy digital I2S audio whilst leaving your GPIO pins conveniently accessible. SHIM is a old Yorkshire term mean...

SKU: PR-PIM269 | Brand: Little Bird

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare ...

SKU: FT-PIBR | Brand: Freetronics

The PiBreak from Freetronics is a prototyping board for the Raspberry Pi, providing labelled breakout pins for all GPIOs, a large solder-pad prototyping area, and GND and 3.3 V power rails for easy connections. Compa...

SKU: AF-3708 | Brand: Adafruit

If you didn't think that the Raspberry Pi Zero W could possibly get any better, then boy do we have a pleasant surprise for you! The new Raspberry Pi Zero WH offers all the benefits of the Pi Zero W, b...

SKU: RP-CM4102032 | Brand: Raspberry Pi Ltd

COMPUTE MODULE 4 is built on the 64-bit quad-core BCM2711 application processor. The Compute Module 4 delivers a step change in performance over its predecessors such as faster CPU cores, better multimedia and more in...

SKU: PH-103396 | Brand: PiHut

The Relay 4 Zero provides a solution for controlling low and medium current/voltage devices with your Raspberry Pi Zero (or any 40-pin Raspberry Pi).It's a nice solution for controlling devices that can't be...

SKU: EC-DTS02115S | Brand: Elecrow

This shield is specially designed for Micro: bit, LCD1602 and Micro: bit using 4-wire connection, it is the same size as LCD1602 display and has 4 crowtail interface, IIC, UART, analog port and digital port. LCD160...

SKU: PR-PIM320 | Brand: Little Bird

A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHAT...

SKU: SF-WRL-24408 | Brand: SparkFun

The SparkFun ESP32-S3 Thing Plus adds a powerful and versatile IoT development platform to the Thing Plus product line. It features the ESP32 WROOM-S3 MINI wireless module from espressif™. The ESP32 WROOM-S3 is built ...

SKU: LB-HS2344 | Brand: Little Bird

The T-Camera is a powerful and compact development board designed for camera-based IoT applications. Powered by an ESP32 dual-core processor, it combines Wi-Fi, Bluetooth, and camera functionality, making it ideal for...

SKU: PI-PIM720 | Brand: Pimoroni

An electronic adventure playground for physical computing, built around the RP2350 chip. Includes a 2.8" LCD screen, a speaker, a mini breadboard, and much more!Our Explorer lets you play with circuits, build science ...

SKU: SB-PICOWIFIHAT | Brand: Little Bird

Raspberry Pi Pico WiFi HAT is a compact and easy-to-use WiFi HAT for the Raspberry Pi Pico that includes an ESP8266 module, IEEE 802.11b/g/n WiFi Standard, 3.3 V Operating Voltage, UART Communication interface, and a...