Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Gravity: Analog Ambient Light Sensor TEMT6000
SKU: DF-SEN0043 | Brand: DFRobot
An analog ambient light sensor based on the TEMT6000 detector, which has a spectral response closely matching the human eye with very low IR sensitivity. It outputs an analog voltage proportional to the ambient light ...
Delivered by Tue 23 Jun
Mini 2-Axis Analog Thumbstick
SKU: AF-2765 | Brand: Adafruit
The Mini 2-Axis Analog Thumbstick is a compact, self-centring joystick with a black rocker cap, similar in style to PSP joysticks. It provides smooth directional analogue input using two 10 kΩ potentiometers — one for...
Delivered by Tue 23 Jun
Panel Mount 100K potentiometer (Breadboard Friendly) [100KB]
SKU: AF-1831 | Brand: Adafruit
This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 100K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will...
Delivered by Tue 23 Jun
Adafruit Feather nRF52 Bluefruit LE [nRF52832]
SKU: AF-3406 | Brand: Adafruit
The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your appli...
Delivered by Tue 23 Jun
Circuit Playground Express Developer Edition - Base Kit
SKU: AF-3517 | Brand: Adafruit
Everything you need to get started with the Circuit Playground Express — a feature-packed, all-in-one development board that works with Microsoft MakeCode (block-based or JavaScript), CircuitPython, code.org CS Discov...
Delivered by Tue 23 Jun
Gravity: Arduino DHT11 Temperature Humidity Sensor
SKU: DF-DFR0067 | Brand: DFRobot
This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memo...
Delivered by Tue 23 Jun
Panel Mount 10K Log Potentiometer w/ On-Off Switch [10K Log w/ Switch]
SKU: AF-3481 | Brand: Adafruit
A panel-mount 10 kΩ logarithmic potentiometer with an integrated on/off switch. The logarithmic taper is designed for audio volume control — resistance increases on a curve that matches how the human ear perceives lou...
Delivered by Mon 13 Jul
Force Sensitive Resistor - Square
SKU: SF-SEN-09376 | Brand: SparkFun
This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the res...
Delivered by Tue 23 Jun
IO Expansion HAT for Pi Zero/Zero W
SKU: DF-DFR0604 | Brand: DFRobot
The IO Expansion HAT adds digital, analogue, I2C, PWM, UART, and SPI ports to the Raspberry Pi Zero and Zero W. An on-board STM32F030 MCU provides 8-channel 12-bit ADC and PWM output, communicating with the Raspberry ...
Delivered by Thu 2 Jul
RP2350 Dual-core CAN Development Board with XL2515 Controller
SKU: WS-30945 | Brand: Waveshare
Waveshare RP2350 CAN Development BoardUnleash the power of robust embedded systems with the cutting-edge Waveshare RP2350 CAN Development Board. Crafted meticulously for those who demand precision and reliability in t...
Delivered by Tue 14 Jul
Adafruit Feather M4 CAN Express with ATSAME51
SKU: AF-4759 | Brand: Adafruit
The Feather M4 CAN Express upgrades the popular Feather M4 platform with the ATSAME51J19 processor, which adds built-in CAN bus support. It features a 120 MHz Cortex M4 with hardware floating point and DSP instruction...
Delivered by Tue 23 Jun
VS1053 MP3 Shield
SKU: EC-ASVS1053MP | Brand: Elecrow
An Arduino-compatible MP3 shield based on the VS1053B audio codec from VLSI. It decodes all major audio formats — including MP3, OGG Vorbis, AAC, WMA, FLAC, WAV, and MIDI — and can record in Ogg Vorbis, IMA ADPCM, and...
Delivered by Tue 23 Jun
Octopus light sensor
SKU: EF-EF04092 | Brand: ElecFreaks
The Octopus Light Sensor Brick reads the ambient light level of its surrounding environment and outputs an analog signal. The 3-pin GVS connector makes it easy to plug into micro:bit expansion boards, Arduino, and oth...
Delivered by Thu 2 Jul
NTSC/PAL (Television) TFT Display - 3.5 Diagonal
SKU: AF-913 | Brand: Adafruit
Yes, this is an adorable small television! The visible display measures only 3.5" (8.9cm) diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red (+) a...
Delivered by Mon 13 Jul
ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier
SKU: AF-1083 | Brand: Adafruit
Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a...
Delivered by Tue 23 Jun
Adafruit METRO 328 with Headers [ATmega328]
SKU: AF-2488 | Brand: Adafruit
The Adafruit METRO 328 is a fully assembled, Arduino UNO R3-compatible development board powered by the ATmega328P running at 16 MHz. It's shape and pin-compatible with Arduino UNO R3 shields, and works directly with ...
Delivered by Tue 23 Jun
SparkFun Sound Detector (with Headers)
SKU: SF-SEN-14262 | Brand: SparkFun
The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound...
Delivered by Thu 2 Jul
Piezo Vibration Sensor - Large
SKU: SF-SEN-09196 | Brand: SparkFun
This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple...
Delivered by Tue 23 Jun
Thumb Joystick
SKU: SF-COM-09032 | Brand: SparkFun
This is a joystick very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a se...
Delivered by Tue 23 Jun
Gravity: Analog Voltage Divider V2
SKU: DF-DFR0051 | Brand: DFRobot
The Analog Voltage Divider V2 can detect the supply voltage from 0.0245V to 25V. This module is based on resistor divider principle. The voltage detection module allows the input voltage to reduce 5 times. As the A...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
