Brands and Manufacturers

SKU: EF-EF04032 | Brand: ElecFreaks

The Octopus Analog Photocell Brick is a light-dependent resistor (LDR) module from the ElecFreaks Octopus Electronic Bricks series. It uses a cadmium-sulfide (CdS) photocell that changes resistance based on ambient li...

SKU: DF-SEN0307 | Brand: DFRobot

The DFRobot URM09 is an analog output ultrasonic distance sensor optimised for fast ranging and obstacle avoidance. With a maximum measurement rate of 30Hz, built-in temperature compensation, and a range of 2–500cm, i...

SKU: AF-4361 | Brand: Adafruit

Pipe audio in or out of your project with this very handy panel mount audio jack. It's a mono jack with a disconnect pin so you'll get a ground sleeve pin, a left tip pin and a pin that will be disconnected when a jac...

SKU: DF-SEN0298 | Brand: DFRobot

This is a circular flexible thin film pressure sensor of long legs with a diameter of 7.6mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static and ...

SKU: DF-SEN0299 | Brand: DFRobot

The RP-L-400 is a long, flexible thin-film pressure sensor with a 400 mm active length. It detects both static and dynamic pressure by converting applied force into a variable resistance — resistance decreases as pres...

SKU: DF-SEN0256 | Brand: DFRobot

The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitabl...

SKU: DF-SEN0264 | Brand: DFRobot

DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperatu...

SKU: DF-SEN0281 | Brand: DFRobot

The MB1260 XL-MaxSonar-EZL0 sensor features centimeter resolution and a 10Hz read rate, and provides short to long distance detection, range information from 25cm to 1068cm. Besides, this sensor has the widest and mos...

SKU: DF-SEN0283 | Brand: DFRobot

The MB7139 XL-TrashSonar-WR is a weather-resistant ultrasonic sensor specifically designed for waste bin fill-level monitoring. It measures the distance to the nearest target from 20 cm to 350 cm with centimetre resol...

SKU: DF-SEN0282 | Brand: DFRobot

The MB7076 XL-MaxSonar-WRLA1 is a weather-resistant ultrasonic ranging sensor with centimetre resolution and a 10 Hz read rate. It detects the nearest target from 20 cm to 1068 cm (over 10 metres) and provides three o...

SKU: DF-SEN0280 | Brand: DFRobot

The MB1360 XL-MaxSonar-AEL0 sensor features centimeter resolution and a 10Hz read rate, and provides short to long distance detection and range information from 25cm to 1068. This sensor has the widest and most sensit...

SKU: DF-SEN0269 | Brand: DFRobot

The HRLV-MaxSonar-EZ4 (MB1043) is a compact ultrasonic range sensor with 1 mm resolution, measuring distances from 300 mm to 5000 mm at a 10 Hz read rate. It features the narrowest beam width in the HRLV-MaxSonar-EZ s...

SKU: AF-4000 | Brand: Adafruit

The Adafruit Metro M4 Express AirLift combines the powerful ATSAMD51J19 ARM Cortex M4 processor with an on-board ESP32 WiFi co-processor — all in the standard Metro/UNO shield-compatible form factor. With 120 MHz cloc...

SKU: EF-EF04061 | Brand: ElecFreaks

A linear sliding potentiometer module from the ElecFreaks Octopus series. Provides an analogue voltage output proportional to the slider position, making it useful as a variable input for controlling volume, brightnes...

SKU: DF-DFR0498 | Brand: DFRobot

DFRobot FireBeetle series are low power consumption development modules designed for Internet of Things (IoT). The FireBeetle Covers-Camera & Audio Media Board is a multimedia device for IoT that provides interfac...

SKU: AF-4404 | Brand: Adafruit

These reflectance sensors feature a linear array of IR emitter/phototransistor pair modules in a high-density (4 mm pitch) arrangement, which makes them well suited for applications that require precise detection...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: AF-3900 | Brand: Adafruit

The Adafruit HalloWing M0 Express is a skull-shaped development board built around the ATSAMD21G18 processor. Featuring a 1.44" full-colour TFT display, a 3-axis accelerometer, a light sensor, a speaker driver, and Fe...

SKU: AF-3901 | Brand: Adafruit

The 'scope is a small, 1.3" diagonal OLED screen that doubles as an oscilloscope to help you understand the inner going-ons of your Chibi Chip. A veritable triple-threat, it packs three functions — text, volts and wav...

SKU: AF-3865 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the ...