Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit VL53L0X Time of Flight Distance Sensor - ~30 to 1000mm
SKU: AF-3317 | Brand: Adafruit
The Adafruit VL53L0X is a Time-of-Flight (ToF) distance sensor from ST that uses an invisible laser to measure distances from approximately 50 mm to 1200 mm. By timing how long the laser light takes to bounce back, it...
Delivered by Thu 18 Jun
Gravity: Arduino DHT11 Temperature Humidity Sensor
SKU: DF-DFR0067 | Brand: DFRobot
This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memo...
Delivered by Thu 18 Jun
Adafruit MagTag - 2.9" Grayscale E-Ink WiFi Display
SKU: AF-4800 | Brand: Adafruit
The Adafruit MagTag is a WiFi-connected E-Ink display board powered by the ESP32-S2. Its 2.9" grayscale display retains its image even when power is removed, making it perfect for low-power IoT dashboards, status boar...
Delivered by Thu 18 Jun
Voice Prompt Module with Integrated MP3 Player and Speaker
SKU: DF-DFR1173 | Brand: DFRobot
This compact voice prompt module integrates an intelligent MP3 playback chip with a 1 W speaker in a tiny 30 × 11 mm package. It supports MP3, WAV, and WMA hardware decoding with 16 MB of on-board storage that retains...
Delivered by Thu 18 Jun
Adafruit SPI FLASH Breakout - W25Q64 - 64 MBit / 8 MByte
SKU: AF-5636 | Brand: Adafruit
The Adafruit SPI FLASH Breakout features a W25Q64 chip providing 64 Mbit (8 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcontrol...
Delivered by Thu 18 Jun
Gravity: Magnetic Latching Relay for ESP32 / Arduino
SKU: DF-DFR0996 | Brand: DFRobot
A Magnetic latching relay is a new type of relay. It features low power dissipation and noiseless. Unlike other non-latching relay, the latching relay needs two digital pulse signal to switch ON/OFF state....
Delivered by Thu 18 Jun
Adafruit Sensirion SHT45 Precision Temperature & Humidity Sensor
SKU: AF-5665 | Brand: Adafruit
The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. This version does not include a PTFE membr...
Delivered by Thu 18 Jun
IR Receiver Module for Arduino
SKU: LB-LR0097-1-NEW | Brand: Little Bird
This infra-red receiver module is perfect for Arduino projects. It has a wide range of applications, including remote control, wireless data transmission, etc.
Delivered by Thu 18 Jun
AM2301B - Wired Enclosed AHT20 - Temperature and Humidity Sensor
SKU: AF-5181 | Brand: Adafruit
The AM2301B is an affordable enclosed temperature and humidity sensor featuring an I2C interface — a modern upgrade over the classic DHT22/AM2302 sensors that required bit-bang timing protocols. Inside is the proven A...
Delivered by Thu 18 Jun
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout
SKU: AF-5027 | Brand: Adafruit
The Adafruit MCP9808 is a high-accuracy digital temperature sensor with ±0.25°C typical accuracy over its −40°C to +125°C range and 0.0625°C resolution. It communicates over standard I2C and runs on 2.7V to 5.5V power...
Delivered by Thu 18 Jun
Adafruit DS1841 I2C Digital 10K Potentiometer Breakout
SKU: AF-4570 | Brand: Adafruit
The Adafruit DS1841 is an I2C-controlled logarithmic digital potentiometer from Maxim with a resistance range of 3.7 kΩ to 22 kΩ across 128 tap points. Unlike linear potentiometers, the DS1841's logarithmic response c...
Delivered by Thu 18 Jun
Adafruit VL53L1X Time of Flight Distance Sensor - ~30 to 4000mm
SKU: AF-3967 | Brand: Adafruit
The Adafruit VL53L1X (also known as VL53L1CX) is a next-generation Time-of-Flight (ToF) distance sensor from ST with an impressive 4-metre range and LIDAR-like precision. Using an invisible laser and matching sensor, ...
Delivered by Thu 18 Jun
Adafruit MSA311 Triple Axis Accelerometer - STEMMA QT / Qwiic
SKU: AF-5309 | Brand: Adafruit
The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...
Delivered by Thu 18 Jun
Adafruit SPI Flash SD Card - XTSD 512 MB
SKU: AF-4899 | Brand: Adafruit
The Adafruit SPI Flash SD Card breakout features an XTSD 512 MB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 512...
Delivered by Thu 18 Jun
Voice Recorder Module-Breakout
SKU: DF-DFR0745 | Brand: DFRobot
Wanna buy a simple & practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes (Arduino, AT command, on-board buttons, and ADKEY), and multi-segment voice recording. Y...
Delivered by Thu 18 Jun
AP3429A 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max
SKU: AF-4711 | Brand: Adafruit
The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...
Delivered by Thu 18 Jun
Adafruit Triple-axis Magnetometer - LIS2MDL - STEMMA QT / Qwiic
SKU: AF-4488 | Brand: Adafruit
The Adafruit LIS2MDL is a triple-axis magnetometer (compass) breakout from ST, capable of sensing magnetic fields across a wide ±50 gauss (±5000 µT) range with no range configuration required. It's ideal for detecting...
Delivered by Thu 18 Jun
Adafruit DPS310 Precision Barometric Pressure / Altitude Sensor - STEMMA QT / Qwiic
SKU: AF-4494 | Brand: Adafruit
The Adafruit DPS310 is a high-precision barometric pressure and altitude sensor from Infineon, mounted on a breakout board with STEMMA QT / Qwiic connectors for solderless I2C wiring. It delivers ±1 hPa absolute accur...
Delivered by Thu 18 Jun
Tilt Sensor Module
SKU: LB-TILT | Brand: Little Bird
A simple tilt sensor module that detects orientation changes. When tilted, the internal conductive ball breaks the circuit; when returned upright, it reconnects — providing a digital output signal. It's a compact, low...
Delivered by Thu 18 Jun
Gravity: UART I2C NFC Module
SKU: DF-DFR0231-H | Brand: DFRobot
Gravity: UART & I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, which supports various types of NFC smart cards or tags like the commonly used MIFARE Classic series and NTAG series i...
Delivered by Thu 18 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared