Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Circuit Playground TFT Gizmo - Bolt-on Display + Audio Amplifier
SKU: AF-4367 | Brand: Adafruit
The TFT Gizmo adds a vibrant 1.54" colour display and audio output to your Circuit Playground board. It bolts directly onto the back of your Circuit Playground using M3 standoffs that provide both mechanical support a...
Delivered by Wed 8 Jul
Adafruit PDM Microphone Breakout with JST SH Connector
SKU: AF-4346 | Brand: Adafruit
The Adafruit PDM Microphone Breakout with JST SH Connector provides a digital audio input using Pulse Density Modulation (PDM) in a compact, cable-ready form factor. The 4-pin JST SH connector (3V, GND, DAT, CLK) pair...
Delivered by Wed 8 Jul
LV-MaxSonar-EZ4(MB1040)
SKU: DF-SEN0275 | Brand: DFRobot
The MB1040 LV-MaxSonar-EZ4 is a compact ultrasonic range sensor from MaxBotix that provides distance measurements from 15 cm to 645 cm (6" to 254") with 2.5 cm (1") resolution. It features the narrowest beam width of ...
Delivered by Mon 29 Jun
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
SKU: AF-4201 | Brand: Adafruit
Give any microcontroller WiFi connectivity with the Adafruit AirLift Breakout. This board uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...
Delivered by Wed 8 Jul
Adafruit eInk Breakout Friend with 32KB SRAM
SKU: AF-4224 | Brand: Adafruit
The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite displa...
Delivered by Wed 8 Jul
Octopus Photo Interrupter Sensor
SKU: EF-EF04012 | Brand: ElecFreaks
Photo Interrupter Sensor is a sensor module based on ITR9608 photoelectric switch, together with special Arduino shield in use. It has been widely used in parts counting, motor speed and so on. Three pins electronic b...
Delivered by Mon 29 Jun
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)
SKU: SF-GPS-15210 | Brand: SparkFun
The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...
Delivered by Mon 29 Jun
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
SKU: SF-GPS-15193 | Brand: SparkFun
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...
Delivered by Mon 29 Jun
SparkFun Triple Axis Magnetometer Breakout - MLX90393 (Qwiic)
SKU: SF-SEN-14571 | Brand: SparkFun
It’s time to start utilizing the superior magnetometer, and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor bo...
Delivered by Mon 29 Jun
Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black)
SKU: DF-DFR0554 | Brand: DFRobot
The Gravity I2C 16×2 LCD features RGB font colours on a black background, allowing you to display text in any of 16 million colour combinations. Using the Gravity I2C interface, only two data lines are needed for both...
Delivered by Mon 29 Jun
LilyPad Light Sensor
SKU: SF-DEV-14629 | Brand: SparkFun
The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...
Delivered by Mon 29 Jun
5V 1.8A Isolated Output PoE Module Works with Raspberry Pi 3 B+
SKU: AF-3848 | Brand: Adafruit
An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electric...
Delivered by Wed 8 Jul
5V 1.5A Output PoE Module - Works with Raspberry Pi 3 B+
SKU: AF-3847 | Brand: Adafruit
A compact Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.5 A. Connect the four input wires to the PoE pins on your Ethernet-capable bo...
Delivered by Wed 8 Jul
SparkFun IR Array Breakout - 110 Degree FOV, MLX90640 (Qwiic)
SKU: SF-SEN-14843 | Brand: SparkFun
It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With thi...
Delivered by Mon 29 Jun
Gravity:Digital Magnetic Sensor
SKU: DF-DFR0033 | Brand: DFRobot
what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right.This magnetic sensor knows whether there is a magnetic object nearby or not. And it c...
Delivered by Thu 18 Jun
Realtek Ameba-RTL8195AM WiFi NFC Module wireless remote control/ telecontrol: Gravity: 315MHz RF Receiver Module
SKU: DF-DFR0477 | Brand: DFRobot
The Realtek Ameba RTL8195AM is an IoT microcontroller module that combines a 32-bit ARM Cortex-M3 MCU (166 MHz) with Wi-Fi 802.11 b/g/n and NFC (Near Field Communication) on a single chip. It supports Arduino and Micr...
Delivered by Mon 29 Jun
SparkFun GPS Breakout - XA1110 (Qwiic)
SKU: SF-GPS-14414 | Brand: SparkFun
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...
Delivered by Thu 18 Jun
MPL115A2 - I2C Barometric Pressure/Temperature Sensor
SKU: AF-992 | Brand: Adafruit
This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMx280 series, which has u...
Delivered by Wed 8 Jul
ADXL326 - 5V ready triple-axis accelerometer (+-16g analog out)
SKU: AF-1018 | Brand: Adafruit
A wide-range triple-axis accelerometer breakout featuring the Analog Devices ADXL326. With a ±16 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for detecting high-impact motion, vibr...
Delivered by Wed 8 Jul
IR distance sensor includes cable (20cm-150cm) [GP2Y0A02YK]
SKU: AF-1031 | Brand: Adafruit
This SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be used to determine how close the nearest object is. Comes with 8" long 3-JST interface wire...
Delivered by Wed 8 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
