Brands and Manufacturers

SKU: LB-00158 | Brand: Little Bird

This PIR sensor is suitable for use with Arduino and Raspberry PI. The 3.3v logic level is very handy as it allows you to use this sensor with 3.3v Arduinos like the Due or Pro Mini as well as 5V like the Uno as 3....

SKU: LB-LR0230 | Brand: Little Bird

The HC-SR04 is a widely used ultrasonic distance sensor that measures distances from 2cm to 500cm (approximately 5 metres) with 1cm resolution. It works by emitting a 40kHz ultrasonic pulse, then measuring the time it...

SKU: LB-LR0109 | Brand: Little Bird

Add Bluetooth functionality to your project with the HC-05 Bluetooth Module. The module is found on a breakout board which provides breadboard-friendly headers for power, ground, TX, RX and enable pins. The breakou...

SKU: LB-LORIKEET | Brand: Little Bird

The Little Bird Lorikeet is an Australian-made RGB LED board featuring five individually addressable WS2812B LEDs (NeoPixel-compatible). Control all five LEDs from a single microcontroller pin using the WS2812B serial...

SKU: LB-FLAME-LIGHT | Brand: Little Bird

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it pro...

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: LB-TOUCAN | Brand: Little Bird

The Little Bird Toucan is an smart RGB LED HAT designed for the Raspberry Pi!Based on the APA102, the Toucan packs 8 super-bright LEDs.Each of the LEDs are dimmable, and individually controllable (Raspberry Pi Rain...

SKU: DF-SEN0503 | Brand: DFRobot

An infrared break-beam sensor pair for simple, reliable motion detection. The emitter sends a beam of invisible IR light to the receiver — when an object passes between them and breaks the beam, the receiver outputs a...

SKU: AF-2167 | Brand: Adafruit

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to tha...

SKU: LB-AAA-BATTERY | Brand: Little Bird

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your E-Textile circuit. ...

SKU: EF-EF04055 | Brand: ElecFreaks

OCTOPUS PIR Sensor module is a type of electronic building block based on AM412 pyroelectric digital smart sensor. It can be used in sensing and detection of human or animal motion, sensing distance is about 4-5 me...

SKU: DF-SEN0101 | Brand: DFRobot

An RGB colour sensor breakout board based on the TAOS TCS3200 chip, with four built-in white LEDs for illumination. The TCS3200 can detect and measure a wide range of visible colours by converting light intensity to a...

SKU: AF-5664 | Brand: Adafruit

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH...

SKU: DF-SEN0206 | Brand: DFRobot

INTRODUCTION We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the se...

SKU: DF-DFR0971 | Brand: DFRobot

This 2-Channel I2C DAC module can output a voltage of 0-10V, which is a standard driver in industrial applications. It can be widely used with most 0-10V devices on markets such as light controllers, inverters, valves...

SKU: DF-DFR0626 | Brand: DFRobot

This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module, the microcontroller can connect 8 modules, and expand ...

SKU: DF-SEN0212 | Brand: DFRobot

The TCS34725 is an I2C RGB colour sensor that detects the red, green, and blue components of light in its environment and returns digital colour values. With high sensitivity, a wide dynamic range, and a built-in IR b...

SKU: AF-6106 | Brand: Adafruit

The Adafruit bq25185 with 5V Boost is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 5V boost converter. It is designed for projects that need a stable 5V su...

SKU: EC-SEL71220A | Brand: Elecrow

A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly...

SKU: AF-3686 | Brand: Adafruit

Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter particulate sensor. Mad Max & Furiosa definitely should have ho...