Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)
SKU: SF-BOB-16784 | Brand: SparkFun
The SparkFun Qwiic Mux Breakout uses the TCA9548A to provide 8 independent I2C channels, solving the common problem of multiple sensors sharing the same address. Simply route each device to its own channel and communi...
Out of stock
Mini Sparkle Motion with Pre-soldered Terminal Block
SKU: AF-6314 | Brand: Adafruit
The Adafruit Sparkle Motion Mini is part of our series of "Sparkle Motion" boards, which are our attempt to make the best small WLED-friendly smart LED driving board in the whole world. Our resident mermaid, firepixie...
Out of stock
Adafruit Sensirion SHT45 Precision Temp & Humidity with PTFE
SKU: AF-6174 | Brand: Adafruit
The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...
Out of stock
SparkFun Micro 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22398 | Brand: SparkFun
The SparkFun BMI270 Micro 6DoF IMU Breakout is a Qwiic-enabled breakout board based on the ultra-low power BMI270 from Bosch. This chip is a highly integrated, low-power IMU optimized for wearables providing precise a...
Out of stock
Tsunami Super WAV Trigger (Qwiic)
SKU: SF-WIG-18159 | Brand: SparkFun
The Tsunami Super WAV Trigger is a polyphonic audio player built around an ARM Cortex M7, capable of mixing up to 32 mono or 18 stereo simultaneous uncompressed 44.1 kHz, 16-bit WAV tracks. Each track can be independe...
Out of stock
NFC/RFID breakout Module
SKU: EF-EF03081 | Brand: ElecFreaks
The NFC/RFID breakout based on PN532, which is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and...
Out of stock
Octopus Real-time Clock
SKU: EF-EF04005 | Brand: ElecFreaks
Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...
Out of stock
Adafruit STHS34PF80 IR Presence / Motion Sensor
SKU: AF-6426 | Brand: Adafruit
The Adafruit STHS34PF80 is a compact IR presence and motion sensor that detects human and animal presence up to 4 metres away — without requiring a lens. Unlike traditional chunky PIR sensors with simple digital outpu...
Out of stock
Adafruit OPT4048 Tri-Stimulus XYZ Color and Lux Sensor
SKU: AF-6335 | Brand: Adafruit
A modern take on the common RGB colour sensor — the OPT4048 provides true CIE XYZ tri-stimulus output so you can match readings directly to standard colour spaces. It also calculates colour temperature (based on CIE) ...
Out of stock
GY-68 BMP180 Digital Barometric Pressure Sensor Board Module
SKU: LB-LR0100 | Brand: Little Bird
Elevate your project with the GY-68 BMP180 Sensor Module, a compact and highly accurate digital barometric pressure sensor designed for precision measurements in various applications.Product Specifications: Item Name...
Out of stock
Adafruit ADG728 1-to-8 Analog Matrix Switch
SKU: AF-5899 | Brand: Adafruit
The Adafruit ADG728 is a solid-state 1-to-8 analog matrix switch controlled over I2C. Unlike relays, analog switches have no moving parts, won't wear out, and switch in approximately 100 ns. Use it to route up to 8 an...
Out of stock
SparkFun Qwiic Buzzer
SKU: SF-BOB-24474 | Brand: SparkFun
The SparkFun Qwiic Buzzer adds simple beeps and buzzes to your projects via I2C. Make some noises to alert you when something interesting (or urgent) happens. Simply connect a Qwiic cable and load up some pre-written ...
Out of stock
SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R, SMA (Qwiic)
SKU: SF-GPS-22660 | Brand: SparkFun
The SparkFun Dead Reckoning Breakout SMA - ZED-F9R is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology....
Out of stock
SparkFun GPS Breakout - Chip Antenna, SAM-M10Q (Qwiic)
SKU: SF-GPS-21834 | Brand: SparkFun
The SparkFun SAM-M10Q GPS Breakout features the SAM-M10Q chip-antenna module from u-blox©. The M10Q line is the successor to u-blox's M8Q found on the SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic), and is a dr...
Out of stock
SparkFun Micro Temperature Sensor - STTS22H (Qwiic)
SKU: SF-SEN-21273 | Brand: SparkFun
The SparkFun STTS22H Micro Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperature sensor STTS22H from ST Microelectronics and housed in our Qwiic Micro for...
Out of stock
SparkFun Micro 6DoF IMU - ISM330DHCX (Qwiic)
SKU: SF-SEN-20176 | Brand: SparkFun
The SparkFun Qwiic Micro ISM330DHCX Six Degrees of Freedom IMU is a micro-sized 0.75in. by 0.30in. sensor featuring STMicroelectronics' ISM330DHCX; a high-performance 3D digital accelerometer and 3D digital gyroscope ...
Out of stock
Adafruit LED Glasses Driver - nRF52840 Sensor Board
SKU: AF-5217 | Brand: Adafruit
The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly a...
Out of stock
Adafruit LED Glasses Front Panel - 116 RGB LEDs with I2C Driver
SKU: AF-5210 | Brand: Adafruit
The Adafruit LED Glasses Front Panel features 116 artfully arranged 2×2 mm RGB LEDs controlled by an IS31FL3741 I2C driver chip. Simply connect it via STEMMA QT to your favourite microcontroller and start creating daz...
Out of stock
Adafruit NeoSlider I2C QT Slide Potentiometer with 4 NeoPixels
SKU: AF-5295 | Brand: Adafruit
Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No ...
Out of stock
MDBT42Q Breakout
SKU: PI-ESP004 | Brand: Pimoroni
This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a boar...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
