Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit - with 2x20 Header
SKU: AF-4353 | Brand: Adafruit
The Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit combines a compact half-sized prototyping board with a built-in Pi Cobbler breakout. Solder in the included 2×20 box header, connect a 40-pin GPIO cable, ...
Delivered by Fri 26 Jun
Panel Mount USB-B to Micro-B Cable - 6
SKU: SF-CAB-15463 | Brand: SparkFun
This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cabl...
Delivered by Fri 26 Jun
SparkFun RedBoard Artemis
SKU: SF-DEV-15444 | Brand: SparkFun
The SparkFun RedBoard Artemis brings the powerful Artemis module into a familiar Arduino Uno footprint. Built around the Ambiq Apollo3 processor, it runs at 48 MHz (with 96 MHz turbo mode), includes BLE 5.0, and draws...
Delivered by Fri 26 Jun
FTDI Serial TTL-232 USB Type C Cable
SKU: AF-4331 | Brand: Adafruit
Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an...
Delivered by Fri 26 Jun
Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit - with 2x20 Header
SKU: AF-4354 | Brand: Adafruit
The Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit combines a full-sized prototyping board with a built-in Pi Cobbler breakout. Solder in the included 2×20 box header, connect a 40-pin GPIO cable, and you...
Delivered by Fri 26 Jun
Ultrasonic Distance Sensor - HC-SR04
SKU: SF-SEN-15569 | Brand: SparkFun
This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an u...
Delivered by Fri 26 Jun
Zero W GPIO Card
SKU: LB-GPIO-ZERO | Brand: Little Bird
Boost the capabilities of your Raspberry Pi Zero with the Zero W GPIO Card. Enjoy seamless integration with your Pi Zero, allowing for easy access to GPIO ports and further expand your projects.
Delivered by Fri 26 Jun
Clear Battery Box (2 x AAA batteries) for micro:bit
SKU: EF-EF11085 | Brand: ElecFreaks
A clear battery holder designed for the BBC micro:bit, holding two AAA batteries. Features a built-in on/off switch and a PH2.0 connector that plugs directly into the micro:bit's battery port. The transparent casing l...
Delivered by Fri 26 Jun
Adafruit LPS35HW Water Resistant Pressure Sensor
SKU: AF-4258 | Brand: Adafruit
The Adafruit LPS35HW is a water-resistant barometric pressure and temperature sensor from ST. The sensing element is housed in a ceramic package with waterproof gel protection, making it safe to use in damp and humid ...
Delivered by Fri 26 Jun
ACCESS:bit for BBC micro:bit
SKU: KI-5646 | Brand: Kitronik
The ACCESS:bit is a bolt-on/clip-on board for the BBC micro:bit that simulates an access barrier. It includes a servo-driven barrier arm, an integrated 3×AAA battery cage with on/off switch, and a buzzer for sound eff...
Delivered by Fri 26 Jun
Header - 2x5 Pin (Male, 1.27mm)
SKU: SF-PRT-15362 | Brand: SparkFun
This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the...
Delivered by Fri 26 Jun
Assembled Adafruit Prop-Maker FeatherWing
SKU: AF-4145 | Brand: Adafruit
The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of...
Delivered by Fri 26 Jun
LED Illuminated Triangle Pushbutton A.K.A 1960s Sci-Fi Buttons - White
SKU: AF-4190 | Brand: Adafruit
We've got plenty of round and square buttons, but these LED Illuminated Triangle Pushbuttons are welcome to the party. These make us think of 1960's or 70's Sci-Fi control board buttons. As everyone knows, tri...
Delivered by Fri 26 Jun
USB 3.1 Cable A to C - 3 Foot
SKU: SF-CAB-14743 | Brand: SparkFun
USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this is the cable you’re going to need. Supporting USB 3.1 speeds, this 1 meter cable is perfect for high data rate tr...
Delivered by Fri 26 Jun
ProtoShield Prototype Extension Board With Mini Breadboard Experiment Plate For Arduino
SKU: LB-LR0093 | Brand: Little Bird
Description:The ProtoShield is prototype expansion board with 2 LEDs and 2 button, which can be used directly and more convenience. All the pins and power have been lead out. It is very suitable for building prototype...
Delivered by Fri 26 Jun
Raspberry Pi 3 B+
SKU: SF-DEV-14643 | Brand: SparkFun
The Raspberry Pi 3 Model B+ is a credit-card-sized single-board computer powered by a 64-bit quad-core ARM Cortex-A53 processor running at 1.4 GHz. Features dual-band Wi-Fi, Bluetooth 4.2/BLE, gigabit Ethernet (via US...
Delivered by Fri 26 Jun
NeoPixel Stick - 8 x 5050 RGBW LEDs - Cool White - ~6000K
SKU: AF-2869 | Brand: Adafruit
What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel sticks now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. These are fun and glowy, and you can control...
Delivered by Fri 26 Jun
NeoPixel Ring - 16 x 5050 RGBW LEDs w/ Integrated Drivers - Natural White - ~4500K
SKU: AF-2855 | Brand: Adafruit
What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel rings now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Round and round and round they go! This is ...
Delivered by Fri 26 Jun
Pogo-a-go-go Solderless GPIO Pogo Pins
SKU: PR-PIM330 | Brand: Little Bird
Fit a pHAT to your Raspberry Pi Zero without soldering! These spring-loaded pogo pins provide a reliable electrical contact between your Pi Zero and pHAT, making it quick and easy to swap boards between projects with ...
Delivered by Fri 26 Jun
Adafruit Prototyping Pi Plate Kit for Raspberry Pi
SKU: AF-801 | Brand: Adafruit
The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. ...
Delivered by Fri 26 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
