Brands and Manufacturers

SKU: AF-161 | Brand: Adafruit

CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...

SKU: AF-239 | Brand: Adafruit

This is a 'full-size' breadboard, 830 tie points. Good for small and medium projects. It's 2.2" x 7" (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the powe...

SKU: DF-FIT0365 | Brand: DFRobot

 INTRODUCTION Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a...

SKU: SF-COM-11372 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and ...

SKU: DF-DFR0332 | Brand: DFRobot

Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable. Add flavor to your own interesting projects with this ...

SKU: SF-COM-12993 | Brand: SparkFun

This is an SMD 12mm square SPST button. What we really like is the large button head and good tactile feel (it ‘clicks’ really well). This button is great for user input or a good reset button on a PCB, heck, we use t...

SKU: SF-COM-12903 | Brand: SparkFun

Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that’s all you want. Well too bad, you are getting two of each!...

SKU: AF-3377 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: SF-SEN-12650 | Brand: SparkFun

The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as a...

SKU: AF-756 | Brand: Adafruit

Transistors are powerful little electronic switches, and we really like these NPN transistors whenever we need to control medium-power electronics such as small motors, solenoids, or IR LEDs. We find them so handy, th...

SKU: AF-3393 | Brand: Adafruit

A dual-ganged 10K linear potentiometer with a built-in on/off switch — two components in one convenient panel-mount package. The dual 10 kΩ linear-taper pots share a grippy shaft that turns smoothly without shifting o...

SKU: DF-DFR0315 | Brand: DFRobot

FEATURESAPPLICATIONSSPECIFICATIONSNote: It has been newest Model: A1M8 --2017/5/15 DOCUMENTS SLAMTEC Website Development Kit SDK & Datasheet Related Rplidar Review by Gavin (@MechatronicsGuy) ICP-SLAM based on Rob...

SKU: LB-LS3779 | Brand: Little Bird

A pack of 10 general-purpose 2N2222A NPN bipolar transistors in a TO-92 package. The 2N2222A is one of the most widely used transistors in electronics, suitable for switching and signal amplification in a broad range ...

SKU: LB-LR0178-350 | Brand: Little Bird

SKU: LB-LS6796 | Brand: Little Bird

 Upgrade your network speed with the UGREEN USB-C to 2.5G Ethernet Adapter. Designed for high-performance connectivity, this adapter allows you to take full advantage of 2500Mbps ultra-fast network speeds, ensuri...

SKU: LB-LS6511 | Brand: Little Bird

A 30-metre kit of flexible silicone hook-up wire in red and black, ideal for power wiring in electronics projects. The 22AWG gauge suits a wide range of applications from breadboard prototyping to permanent installati...

SKU: AF-6106 | Brand: Adafruit

The Adafruit bq25185 with 5V Boost is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 5V boost converter. It is designed for projects that need a stable 5V su...

SKU: PI-PIM716 | Brand: Pimoroni

Clipper lets you receive and transmit data over 4G LTE cellular networks - perfect for remote or mobile projects.WiFi is great, but sometimes you want your connected project to Just Work, wherever in the world it is. ...

SKU: WS-18549 | Brand: Waveshare

Low-Profile ICE Tower Cooling Fan For Raspberry Pi 4B/3B+/3B, 5mm Copper Tube, Colorful LED Specifications SUPPORTED PI | Raspberry Pi 4B/3B+/3BPOWER SUPPLY | DC 5V input (can be powered from Raspberry Pi)STRUCTURE | ...

SKU: LB-LS6214 | Brand: Little Bird

Introducing our Tact Switch 6mm x 6mm x 5mm - 10 pack, the perfect addition to your electronic projects. These small and compact switches are designed for easy, seamless integration into your circuit boards. With a si...