Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Delivered by Mon 22 Jun
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
SKU: AF-4170 | Brand: Adafruit
A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable ...
Delivered by Mon 22 Jun
Kitronik Inventor's Kit for the BBC micro:bit
SKU: KI-5603 | Brand: Kitronik
The Kitronik Inventor's Kit is a comprehensive electronics starter kit designed for the BBC micro:bit. Includes everything you need to complete 12 hands-on experiments using LEDs, motors, LDRs, capacitors, a potentiom...
Delivered by Mon 22 Jun
Gravity: I2C LCD1602 Arduino LCD Display Module (Green)
SKU: DF-DFR0556 | Brand: DFRobot
A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD...
Delivered by Mon 22 Jun
Pro Mini board ATMEGA328P 5V/16M
SKU: LB-LR0509A | Brand: Little Bird
Specification:14 Digital input / output port: RX, TX, D2 - D138 analog inputs: A0 - A71 pairs of ports TTL level serial transceiver: RX / TX6 PWM ports: D3, D5, D6, D9, D10, D11Using Atmel AtMega328P-AU MCUSupport...
Delivered by Mon 22 Jun
Pico HAT Hacker
SKU: PR-PIM300 | Brand: Little Bird
The Pico HAT Hacker is an ultra-thin breakout board that gives you full access to all 40 GPIO pins on your Raspberry Pi. At just 0.8 mm thick, it solders directly onto the Pi's header pins while leaving enough pin hei...
Delivered by Mon 22 Jun
Little Bird L3G4200D based 3 Axis Gyro
SKU: LB-LR0401 | Brand: Little Bird
Product Overview The L3G4200D Gyroscope Module is a low power 3-Axis angular rate sensor with temperature data. The gyroscope shows the rate of change in rotation on its X,Y and Z axes. Temperature output data and...
Delivered by Mon 22 Jun
E-Textiles ADXL335 three axis acceleration sensor
SKU: LB-ETEXTILEADXL335 | Brand: Little Bird
This three-axis accelerometer is designed for e-textiles projects and is based on the ADXL335 MEMS accelerometer from Analog Devices. It can be used to detect joint movement, inclination and vibration.The board provid...
Delivered by Mon 22 Jun
Red Wire Wrap Wire on Spool 250m 30AWG
SKU: LB-LS0153R | Brand: Little Bird
Red Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degrees
Delivered by Mon 22 Jun
Gravity: Analog Water Pressure Sensor
SKU: DF-SEN0257 | Brand: DFRobot
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...
Delivered by Mon 22 Jun
SparkFun Qwiic Adapter
SKU: SF-DEV-14495 | Brand: SparkFun
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...
Delivered by Mon 22 Jun
JST-PH 2-Pin SMT Right Angle Connector
SKU: AF-1769 | Brand: Adafruit
This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...
Delivered by Mon 22 Jun
Adafruit GEMMA v2 - Miniature wearable electronic platform
SKU: AF-1222 | Brand: Adafruit
The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable eno...
Delivered by Mon 22 Jun
Gravity: Digital Piezo Disk Vibration Sensor
SKU: DF-DFR0052 | Brand: DFRobot
The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the...
Delivered by Mon 22 Jun
Needle Nose Pliers
SKU: SF-TOL-08793 | Brand: SparkFun
Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long.
Delivered by Mon 22 Jun
Reed Switch
SKU: SF-COM-08642 | Brand: SparkFun
This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the ...
Delivered by Mon 22 Jun
Real Time Clock Module (DS1307) V1.1
SKU: DF-DFR0151 | Brand: DFRobot
The DS1307 Real Time Clock module developed by one of our designers: Waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium co...
Delivered by Mon 22 Jun
Transistor Pack (170 pcs)
SKU: DF-FIT0322 | Brand: DFRobot
This package includes 17 species transistors in common use.It's convenient for you to make some small designs.You could find a suitable one for your type! A transistor is a semiconductor device used to amplify and sw...
Delivered by Mon 22 Jun
Hook-up Wire - Red (22 AWG)
SKU: SF-PRT-08023 | Brand: SparkFun
Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
Delivered by Mon 22 Jun
Momentary Button - Panel Mount (Red)
SKU: SF-COM-11992 | Brand: SparkFun
A compact red momentary push button designed for panel mounting. This SPST normally-open switch is ideal for basic on/off, reset, and trigger functions in electronic projects and enclosures. Specifications Type: SP...
Delivered by Mon 22 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
