Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
SKU: AF-4831 | Brand: Adafruit
The Adafruit LTR390 is a dual-purpose UV and ambient light sensor with true UVA sensing at a peak spectral response between 300 and 350 nm. Unlike UV index approximation sensors, the LTR390 has a genuine UV photodiode...
Delivered by Wed 14 Oct
Patch Test Hook (10 Pack)
SKU: DF-FIT0720 | Brand: DFRobot
These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with c...
Delivered by Wed 14 Oct
ST-LINK V2 Emulator and Debugger
SKU: EC-DPO01117E | Brand: Elecrow
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate ...
Delivered by Wed 14 Oct
Adafruit MS8607 Pressure Humidity Temperature PHT Sensor - STEMMA QT / Qwiic
SKU: AF-4716 | Brand: Adafruit
The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a...
Delivered by Wed 14 Oct
Hobby Motor with Encoder - Metal Gear (DG01D-E)
SKU: SF-ROB-16413 | Brand: SparkFun
The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is dete...
Delivered by Wed 14 Oct
Starter Kit for Raspberry Pi Zero/Zero W
SKU: EC-DRA09012K | Brand: Elecrow
An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapte...
Delivered by Wed 14 Oct
Octopus Analog UV sensor (GUVA-S12SD)
SKU: EF-EF04093 | Brand: ElecFreaks
Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the...
Delivered by Wed 14 Oct
Adafruit MPU-6050 6-DoF Accel and Gyro Sensor - STEMMA QT Qwiic
SKU: AF-3886 | Brand: Adafruit
The Adafruit MPU-6050 breakout combines a 3-axis accelerometer and 3-axis gyroscope in a single compact sensor, providing 6 degrees of freedom (6-DoF) motion sensing over I2C. A proven and popular IMU, the MPU-6050 is...
Delivered by Wed 14 Oct
Octopus Soil Moisture Sensor Brick
SKU: EF-EF04027 | Brand: ElecFreaks
Octopus Soil Moisture Sensor Brick can read the amount of moisture present in the soil surrounding it. It's a low tech sensor, but ideal for monitoring an urban garden, or your pet plant's water level. This is a mu...
Delivered by Wed 14 Oct
ZIP Halo for the BBC micro:bit
SKU: KI-5625 | Brand: Kitronik
The ZIP Halo is a circular LED board for the BBC micro:bit featuring 24 individually addressable full-colour ZIP LEDs (WS2812B). Each LED can display a huge spectrum of colours, enabling vibrant rainbow effects, colou...
Delivered by Wed 14 Oct
Adafruit BMP388 - Precision Barometric Pressure and Altimeter
SKU: AF-3966 | Brand: Adafruit
The BMP388 from Bosch is a high-precision barometric pressure and temperature sensor, offering significantly improved altitude accuracy over the BMP280. With altitude noise as low as 0.1 metres and a relative accuracy...
Delivered by Wed 14 Oct
Thin White Wheel for TT DC Gearbox Motors - 65mm Diameter
SKU: AF-3763 | Brand: Adafruit
We're keepin' it wheel with this one! Plastic gear-box motors (also known as 'TT' motors) are an easy and low cost way to get your projects moving. But we've noticed that there are not a lot of nice TT motor&n...
Delivered by Wed 14 Oct
Incremental Photoelectric Rotary Encoder - 400P/R
SKU: DF-SEN0230 | Brand: DFRobot
This is an industrial incremental photoelectric rotary encoder with aluminum material, metal shell and stainless steel shaft. It generates AB two-phase orthogonal pulse signal though the rotation of the grating dis...
Delivered by Wed 14 Oct
Panel Mount USB Cable - B Female to Micro-B Male
SKU: AF-937 | Brand: Adafruit
This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino Leonardo or Raspberry Pi in a box.The jack half h...
Delivered by Wed 14 Oct
Radial Ball Bearing 608ZZ - Set of 4
SKU: AF-1178 | Brand: Adafruit
Rollin' rollin' rollin', you can now roll around smooth as silk with these radial bearings. Often referred to as "skate bearings" They're good for supporting a rotating rod or as a wheel hub. However, these are higher...
Delivered by Wed 14 Oct
Opto Interrupter IRT9608 DIP-4
SKU: LB-LS1216 | Brand: Little Bird
This sensor is composed of an infrared emitter on one upright and a shielded infrared detector on the other. By emitting a beam of infrared light from one upright to the other, the sensor can detect when an object pas...
Delivered by Wed 14 Oct
Adafruit LED Sequins - Pack of 5 - Emerald Green
SKU: AF-1756 | Brand: Adafruit
Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...
Delivered by Wed 14 Oct
Adafruit LED Sequins - Pack of 5 - Ruby Red
SKU: AF-1755 | Brand: Adafruit
Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...
Delivered by Wed 14 Oct
Continuous Rotation Micro Servo [FS90R]
SKU: AF-2442 | Brand: Adafruit
Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. ...
Delivered by Wed 14 Oct
Wheel 42x19mm (Pair)
SKU: DF-FIT0085 | Brand: DFRobot
This custom-designed plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on...
Delivered by Wed 14 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared