Brands and Manufacturers

SKU: EF-EF08232 | Brand: ElecFreaks

Based on Planet X sensors, Nezha Inventor's Kit is designed for BBC micro:bit. It contains multiple sensors, ultrasonic sensor, crash sensor, line-tracking sensor, etc., and also with over 400 pieces of bricks. We pla...

SKU: AF-4862 | Brand: Adafruit

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input ...

SKU: LB-USB-C | Brand: Little Bird

A 1-metre USB-A to USB-C cable wrapped in a soft, patterned fabric braid with an eye-catching design. Supports USB 1.1 and 2.0 for data transfer and charging — works with any device that has a USB-C port. Key Feature...

SKU: EF-EF04086 | Brand: ElecFreaks

A single-channel 3 V relay module from the ElecFreaks OCTOPUS series, designed for use with the BBC micro:bit. It uses a high-quality HUIKE relay capable of switching loads up to 30 A, making it suitable for controlli...

SKU: LB-LS2186 | Brand: Little Bird

Looking to dazzle your kids?  Want a mini dance party at your desk?  Look no further!   These mini disco lights plug directly into your USB and flash away.  The will flash in time to music or ...

SKU: MD-4A050 | Brand: Makedo

We all know kids love to play with the box more than the toy! Help them ditch the tangle of tape and gift them this starter toolbox of Makedo to take their play into another realm of imagination. This is pure, no-t...

SKU: MD-FOLD-ROLLER | Brand: Makedo

The Makedo FOLD-ROLLER is a cardboard construction tool that creates precise perforation lines for clean, controlled folds. Roll the toothed wheel firmly across the cardboard surface to perforate, then fold along the ...

SKU: EF-EF10130 | Brand: ElecFreaks

Alligator clips (also known as crocodile clips) are one of the most useful tools on any maker's workbench. Whether you're testing a circuit, connecting a micro:bit to external components, or extending your multimeter ...

SKU: AF-4299 | Brand: Adafruit

A compact adapter that converts a Micro-B USB cable to a USB-C plug. Simply attach it to the end of an existing Micro-B cable to connect to USB-C devices — no new cable required. Key Features Micro-B Socket to USB-...

SKU: PR-PIM271 | Brand: Little Bird

Power your Pi with a wide range of input voltages from 3 to 16V! Wide Input SHIM lets you use a range of different power supplies with your Pi, including the ubiquitous 12V barrel jack power supplies.&nbs...

SKU: AF-3919 | Brand: Adafruit

A plug-and-play NeoPixel strip with a JST PH 3-pin connector for instant connection to STEMMA-compatible boards. This compact 0.5-metre strip has 30 individually addressable RGB LEDs at 60 LED/m density, providing tig...

SKU: LB-LS0312 | Brand: Little Bird

This DIY Robot Tank Chassis with built-in Shock absorption the perfect base for your next robotics project. Specifications:  Motor: 260 Voltage: 3V-9V Weight: 550g Track Width: 2.3cm Size: 30cm x 15cm x 7.6cm N...

SKU: SF-PRT-14491 | Brand: SparkFun

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and...

SKU: PI-COM1101 | Brand: Pimoroni

These 40-pin 2x20 male headers can be used on a Pi Zero or a pHAT to break out the pins.You can choose either straight or at a 90° angle.Add one to a Pi Zero for compatibility with HATs (which use a female header).Can...

SKU: KI-5642 | Brand: Kitronik

The Kitronik STOP:bit is a pre-assembled traffic light board designed for the BBC micro:bit. It replicates a real traffic light with three 10 mm LEDs (red, amber, green) driven directly from the micro:bit's I/O pins (...

SKU: LB-LR0399 | Brand: Little Bird

This straight bar load cell (strain gauge) converts applied force or weight into a proportional electrical signal, with a maximum capacity of 5kg. It uses four strain gauges arranged in a Wheatstone bridge configurati...

SKU: RB-WIFIMINI | Brand: Little Bird

The RedBearLab WiFi Mini is a compact development board based on the Texas Instruments CC3200 — the industry's first single-chip ARM Cortex-M4 microcontroller with built-in WiFi connectivity. No prior WiFi experience ...

SKU: DF-FIT0117 | Brand: DFRobot

An assortment of 100 aluminium electrolytic capacitors across 12 common values, ranging from 1µF to 470µF. A handy kit for prototyping, decoupling, and general-purpose circuit building — covers the most frequently use...

SKU: DF-FIT0154 | Brand: DFRobot

These high-quality breadboard jumper cables are made with 22 AWG multi-strand wire and sturdy male pins on both ends. Each cable is approximately 214 mm long and comes in assorted colours for easy circuit identificati...

SKU: TB-HP9540 | Brand: Little Bird

Vero board with Alpha numeric grid.