Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Resistor 100 Ohm 1/4 Watt PTH - 20 pack (Thick Leads)
SKU: SF-PRT-14493 | Brand: SparkFun
These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limite...
Delivered by Thu 6 Aug
Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger [v1]
SKU: AF-1904 | Brand: Adafruit
The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your batt...
Delivered by Thu 6 Aug
Raspberry Pi 5 PCIe HAT – USB 3.2 Gen1, M.2 NVMe SSD Support
SKU: WS-31436 | Brand: Waveshare
Expand your Raspberry Pi 5 with high-speed storage and extra USB connectivity using this PCIe HAT+ board. It connects to the Pi 5’s 16PIN PCIe interface with the included cable, adding an M.2 NVMe slot plus four USB 3...
Delivered by Thu 6 Aug
Raspberry Pi PoE+ HAT (Compatible with Raspberry Pi 4B / 3B+)
SKU: DF-DFR0876 | Brand: DFRobot
The Raspberry Pi PoE+ HAT adds Power over Ethernet capabilities to your Raspberry Pi 3B+ or 4B, allowing you to power and connect your Pi to the network using a single Ethernet cable. This eliminates the need for a se...
Delivered by Thu 6 Aug
Industrial USB TO 4Ch RS485 Converter, Multi Protection Circuits, Multi Systems Support, Aluminium Alloy Case
SKU: WS-25219 | Brand: Waveshare
Industrial USB TO 4Ch RS485 Converter, Multi Protection Circuits, Multi Systems Support, Aluminium Alloy Case, Wall-Mount & Rail-Mount Support Industrial USB TO 4CH RS485 Communication Module...
Delivered by Thu 6 Aug
UNIHIKER - IoT Python Single Board Computer with Touchscreen
SKU: DF-DFR0706-EN | Brand: DFRobot
UNIHIKER is a compact single-board computer with a built-in 2.8-inch touchscreen, Wi-Fi, and Bluetooth. It features an array of on-board sensors — light sensor, accelerometer, gyroscope, and microphone — along with a ...
Delivered by Thu 6 Aug
Arduino UNO R4 Minima
SKU: SF-DEV-22633 | Brand: SparkFun
Arduino empowers makers’ creativity and passion for innovation with a robust new board that’s perfect for all users, from beginners to experts – allowing anyone to easily connect to the internet and create IoT proj...
Delivered by Thu 6 Aug
USB-A Female to Type-C Male Adapter
SKU: SF-PRT-21870 | Brand: SparkFun
A simple plug and play USB C to A converter (and vice-versa). This allows you to run devices and cables with the classic USB Type A connector off a device or adapter with a USB Type C port. It features up to USB 3.1 s...
Delivered by Thu 6 Aug
Adafruit Feather RP2040 with RFM95 LoRa Radio - 915MHz
SKU: AF-5714 | Brand: Adafruit
The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software...
Delivered by Thu 6 Aug
Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer
SKU: AF-5664 | Brand: Adafruit
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH...
Delivered by Thu 6 Aug
Gravity: I2C HUB
SKU: DF-DFR0759 | Brand: DFRobot
This Gravity: I2C HUB module is designed to connect up to 8 I2C devices to a main-controller, which allows you easily to hook up multiple I2C devices in project building, for instance, use Gravity-4P I2C/UART sen...
Delivered by Thu 6 Aug
Flexible Qwiic Cable - 100mm
SKU: SF-PRT-17259 | Brand: SparkFun
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon mak...
Delivered by Thu 6 Aug
Adafruit Matrix Portal - CircuitPython Powered Internet Display
SKU: AF-4745 | Brand: Adafruit
The Adafruit Matrix Portal is a plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by an ATSAMD51 (Cortex M4) with an ESP32 WiFi coprocessor, it plugs directly into the back of any compatible matrix — ...
Delivered by Thu 6 Aug
Adafruit TDK InvenSense ICM-20948 9-DoF IMU (MPU-9250 Upgrade) - STEMMA QT / Qwiic
SKU: AF-4554 | Brand: Adafruit
The Adafruit TDK InvenSense ICM-20948 is a compact 9-DoF Inertial Measurement Unit that packs a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer into a single breakout board. It pairs InvenSense's MEMS ...
Delivered by Thu 6 Aug
Adafruit BH1750 Light Sensor - STEMMA QT / Qwiic
SKU: AF-4681 | Brand: Adafruit
The Adafruit BH1750 Light Sensor is a 16-bit ambient light sensor from Rohm that provides measurements directly in lux — the SI unit for illuminance. This makes it easy to compare readings against reference values or ...
Delivered by Thu 6 Aug
Octopus Single RGB Rainbow LED
SKU: EF-EF04091 | Brand: ElecFreaks
Octopus Single RGB Rainbow LED is one of the single rainbow LED electronic bricks in OCTOPUS series. The basic design is upon the OCTOPUS electronic bricks series with the identical design on the outlook, PCB fi...
Delivered by Thu 6 Aug
Adafruit TLV493D Triple-Axis Magnetometer - STEMMA QT / Qwiic
SKU: AF-4366 | Brand: Adafruit
The Adafruit TLV493D is a 3-axis magnetometer designed for detecting and tracking nearby magnets in three dimensions. Manufactured by Infineon, this sensor measures magnetic fields across the X, Y, and Z axes with 12-...
Delivered by Thu 6 Aug
Adafruit DS3502 I2C Digital 10K Potentiometer Breakout - STEMMA QT
SKU: AF-4286 | Brand: Adafruit
The Adafruit DS3502 is an I2C-controlled digital potentiometer that lets your microcontroller adjust resistance programmatically — no manual knob-turning required. Simply send a command over I2C from an Arduino, Circu...
Delivered by Thu 6 Aug
Gravity: I2C LCD1602 Arduino LCD Display Module (Gray)
SKU: DF-DFR0557 | Brand: DFRobot
The Gravity I2C LCD1602 is a 16×2 character LCD display module from DFRobot's Gravity series, redesigned with a clean modern look and simplified I2C interface. It eliminates the need for contrast adjustment, retains b...
Delivered by Thu 6 Aug
Adafruit RGB Matrix Shield for Arduino
SKU: AF-2601 | Brand: Adafruit
The Adafruit RGB Matrix Shield simplifies connecting HUB75-type RGB LED matrices to Arduino-compatible boards. Instead of wiring up a bundle of individual connections, this shield handles all the routing for you — jus...
Delivered by Thu 6 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared