Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Delivered by Thu 6 Aug
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
SKU: AF-4170 | Brand: Adafruit
A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable ...
Delivered by Thu 6 Aug
Gravity: I2C LCD1602 Arduino LCD Display Module (Green)
SKU: DF-DFR0556 | Brand: DFRobot
A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD...
Delivered by Thu 6 Aug
Through-Hole Resistors - 4.7K ohm 5% 1/4W - Pack of 25
SKU: AF-2783 | Brand: Adafruit
ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 4.7K Ω Resistors. More specifically, they are carbon film,...
Delivered by Thu 6 Aug
Gravity: Analog Water Pressure Sensor
SKU: DF-SEN0257 | Brand: DFRobot
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...
Delivered by Thu 6 Aug
SparkFun Qwiic Adapter
SKU: SF-DEV-14495 | Brand: SparkFun
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...
Delivered by Thu 6 Aug
JST-PH 2-Pin SMT Right Angle Connector
SKU: AF-1769 | Brand: Adafruit
This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...
Delivered by Thu 6 Aug
Needle Nose Pliers
SKU: SF-TOL-08793 | Brand: SparkFun
Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long.
Delivered by Thu 6 Aug
Reed Switch
SKU: SF-COM-08642 | Brand: SparkFun
This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the ...
Delivered by Thu 6 Aug
Real Time Clock Module (DS1307) V1.1
SKU: DF-DFR0151 | Brand: DFRobot
The DS1307 Real Time Clock module developed by one of our designers: Waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium co...
Delivered by Thu 6 Aug
Transistor Pack (170 pcs)
SKU: DF-FIT0322 | Brand: DFRobot
This package includes 17 species transistors in common use.It's convenient for you to make some small designs.You could find a suitable one for your type! A transistor is a semiconductor device used to amplify and sw...
Delivered by Thu 6 Aug
Hook-up Wire - Red (22 AWG)
SKU: SF-PRT-08023 | Brand: SparkFun
Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.
Delivered by Thu 6 Aug
Arduino DMX Shield
SKU: DF-DFR0260 | Brand: DFRobot
The Arduino DMX Shield is a low-cost, high-quality interface that connects your Arduino to DMX512 lighting networks. Built around the MAX485 transceiver and equipped with NEUTRIK XLR 3-pin connectors (one male, one fe...
Delivered by Thu 6 Aug
TMP36 - Analog Temperature sensor [TMP36]
SKU: AF-165 | Brand: Adafruit
The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert ...
Delivered by Thu 6 Aug
MicroSD card breakout board+
SKU: AF-254 | Brand: Adafruit
Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides 150mA for power-hungry cards 3v level shifting means you can use this with ease ...
Delivered by Thu 6 Aug
USB Mini-B Cable - 6
SKU: SF-CAB-13243 | Brand: SparkFun
This is a USB 2.0 type B to Mini-B 5-pin black cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players, etc. We specifically like these 6" long cables because using USB peripherals...
Delivered by Thu 6 Aug
Adafruit Universal Thermocouple Amplifier MAX31856 Breakout
SKU: AF-3263 | Brand: Adafruit
The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout reads temperature from virtually any thermocouple type — K, J, N, R, S, T, E, or B — with 0.0078125°C resolution and a measurement range of -210°C to +18...
Delivered by Thu 6 Aug
Ribbon Crimp Connector - 6-pin (2x3, Female)
SKU: SF-PRT-10651 | Brand: SparkFun
These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which...
Delivered by Thu 6 Aug
Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall Header
SKU: AF-1979 | Brand: Adafruit
This extra-tall, extra-long 2x20 female stacking header lets you add multiple plates, breakouts and other boards to a Raspberry Pi with a 40-pin GPIO header.The female header section is made taller to help an attached...
Delivered by Thu 6 Aug
Adafruit 0.56 4-Digit 7-Segment Display w/I2C Backpack - Red
SKU: AF-878 | Brand: Adafruit
The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in red makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you...
Delivered by Thu 6 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared