Brands and Manufacturers

SKU: SF-COM-00526 | Brand: SparkFun

The LD1117V33 is a low-dropout (LDO) positive voltage regulator with a fixed 3.3V output. With on-chip trimming providing ±1% output voltage tolerance and built-in current and thermal limiting, it's a reliable choice ...

SKU: SF-DEV-10867 | Brand: SparkFun

This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics...

SKU: SF-SEN-10293 | Brand: SparkFun

A simple piezo element that can be used as both a sensor and a small audio transducer. When flexed or tapped, it generates a voltage that can be read by a microcontroller, making it ideal for knock and vibration detec...

SKU: AF-3501 | Brand: Adafruit

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+...

SKU: WS-20380 | Brand: Waveshare

The PicoGo is a smart mobile robot platform designed for the Raspberry Pi Pico. It integrates line-following, obstacle avoidance, ultrasonic ranging, object tracking, Bluetooth and IR remote control, an LCD display, a...

SKU: AF-5724 | Brand: Adafruit

The Adafruit RP2040 CAN Bus Feather combines the powerful RP2040 microcontroller with an MCP25625 CAN controller and transceiver, giving you a ready-to-go CAN Bus interface in the compact Feather form factor. No solde...

SKU: LB-LORI-RT | Brand: Little Bird

The Lorikeet is a compact RGB LED board with five individually programmable WS2812B LEDs, also commonly known as NeoPixels. Each LED is addressable, with the driver chip built into the LED package.It uses a chainable ...

SKU: AF-5400 | Brand: Adafruit

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provid...

SKU: EF-EF08232 | Brand: ElecFreaks

Based on Planet X sensors, Nezha Inventor's Kit is designed for BBC micro:bit. It contains multiple sensors, ultrasonic sensor, crash sensor, line-tracking sensor, etc., and also with over 400 pieces of bricks. We pla...

SKU: AF-4862 | Brand: Adafruit

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input ...

SKU: EF-EF04086 | Brand: ElecFreaks

A single-channel 3 V relay module from the ElecFreaks OCTOPUS series, designed for use with the BBC micro:bit. It uses a high-quality HUIKE relay capable of switching loads up to 30 A, making it suitable for controlli...

SKU: EF-EF10130 | Brand: ElecFreaks

Alligator clips (also known as crocodile clips) are one of the most useful tools on any maker's workbench. Whether you're testing a circuit, connecting a micro:bit to external components, or extending your multimeter ...

SKU: AF-4299 | Brand: Adafruit

A compact adapter that converts a Micro-B USB cable to a USB-C plug. Simply attach it to the end of an existing Micro-B cable to connect to USB-C devices — no new cable required. Key Features Micro-B Socket to USB-...

SKU: SF-PRT-14491 | Brand: SparkFun

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and...

SKU: KI-5642 | Brand: Kitronik

The Kitronik STOP:bit is a pre-assembled traffic light board designed for the BBC micro:bit. It replicates a real traffic light with three 10 mm LEDs (red, amber, green) driven directly from the micro:bit's I/O pins (...

SKU: DF-FIT0117 | Brand: DFRobot

An assortment of 100 aluminium electrolytic capacitors across 12 common values, ranging from 1µF to 470µF. A handy kit for prototyping, decoupling, and general-purpose circuit building — covers the most frequently use...

SKU: DF-FIT0154 | Brand: DFRobot

These high-quality breadboard jumper cables are made with 22 AWG multi-strand wire and sturdy male pins on both ends. Each cable is approximately 214 mm long and comes in assorted colours for easy circuit identificati...

SKU: DF-FIT0266 | Brand: DFRobot

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...

SKU: SF-COM-00102 | Brand: SparkFun

Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch.

SKU: AF-354 | Brand: Adafruit

Need a big battery for your project? This lithium ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provid...