Audio & Video

SKU: AF-2341 | Brand: Adafruit

The Adafruit Audio FX Mini Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger ...

SKU: AF-1785 | Brand: Adafruit

A medium surface transducer that turns any flat surface — tables, walls, panels — into a speaker. Unlike traditional cone speakers, a voice coil wrapped around a metal rod causes vibration that transfers directly to t...

SKU: WS-24211 | Brand: Waveshare

This HDMI to USB video capture adapter lets you capture HDMI video and audio directly to your computer via USB. Simply plug in an HDMI source — game console, camera, set-top box, or single-board computer — and it appe...

SKU: LB-LS1891 | Brand: Little Bird

HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface.&nbsp...

SKU: TB-ZL3386 | Brand: Little Bird

LM386N-1 - 8 - Low voltage 325mW amplifier Specifications active mount type Through Hole active connector type ...

SKU: AF-4031 | Brand: Adafruit

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack so you get left and right channels as well as a ground pin. You can use any 3.5mm stereo cable with this jac...

SKU: AF-2914 | Brand: Adafruit

A 3.5 mm (1/8") 4-pole TRRS audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. TRRS s...

SKU: AF-3346 | Brand: Adafruit

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D ampli...

SKU: DF-FIT0449 | Brand: DFRobot

INTRODUCTION This speaker module is based on the 8002 speaker amplifier IC. It can be used as a buzzer and also play high quality audio. Volume output is controlled via the potentiomet...

SKU: LB-LS2184 | Brand: Little Bird

Capacitive microphone, professional metal lavalier mobile phone microphone, designed for mobile phonesWire: 2.0mm x 1.5mOmnidirectional microphone core -30±2dBDetachable clip4 gold-plated 3.5mm in-lineTensile shielded...

SKU: PI-CAM001 | Brand: Pimoroni

A clip-on lens kit with three interchangeable lenses — wide-angle, fish-eye, and macro — for use with Raspberry Pi camera modules, phones, and other small cameras. Each lens screws into the included clip, which attach...

SKU: DF-DFR1154 | Brand: DFRobot

An intelligent AI camera module built around the ESP32-S3 chip, combining a 160° wide-angle infrared camera, onboard microphone, speaker, and powerful edge AI capabilities. Designed for video processing, image recogni...

SKU: WS-26379 | Brand: Waveshare

Introducing the PICO-CAM-A: RP2040 Camera Development Board Unlock the potential of image information capture with our PICO-CAM-A, a cost-effective, high-performance MCU camera board based on the Raspberry Pi RP2...

SKU: WS-25553 | Brand: Waveshare

A 3 MP camera module built around the SmartSens SC3336 sensor, designed for use with LuckFox Pico series boards. The 1/2.8" CMOS sensor delivers high-sensitivity, high-SNR imaging with strong low-light performance, ma...

SKU: AF-5721 | Brand: Adafruit

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at the edge of the camera board, and don't even mention trying to ...

SKU: LB-SPEAKER-WHITE | Brand: Little Bird

The speaker itself is 3.81m (1.5") in diameter and is perfect for any project where you need an 8Ω impedance, and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wat...

SKU: AF-2343 | Brand: Adafruit

These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED use...

SKU: SF-COM-11143 | Brand: SparkFun

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections!  Th...

SKU: AF-1891 | Brand: Adafruit

Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (pr...

SKU: LB-STEREO | Brand: Little Bird

A solder-type 3.5 mm (1/8") stereo TRS plug with a durable metal housing. Ideal for building or repairing custom audio cables, connecting to breakout boards, or adding a standard headphone-size connector to DIY projec...