Arduino

SKU: SF-SEN-13261 | Brand: SparkFun

The SparkFun OpenScale is an open-source weight measurement board designed for load cells. Simply connect a four-wire or five-wire load cell of any capacity, plug into USB, open a serial terminal at 9,600 bps, and you...

SKU: SF-SEN-10916 | Brand: SparkFun

This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity an...

SKU: PL-970 | Brand: Pololu

The 0.100″ (2.54 mm) Shorting Block is a removable jumper with a closed-top black housing, designed to bridge two adjacent pins on a standard 0.1″ pitch male header. Shorting blocks are essential for configuring hardw...

SKU: PL-968 | Brand: Pololu

The 0.100″ (2.54 mm) Shorting Block is a removable jumper with a closed-top blue housing, designed to bridge two adjacent pins on a standard 0.1″ pitch male header. Shorting blocks are essential for configuring hardwa...

SKU: SF-LCD-10862 | Brand: SparkFun

This is similar to other 16x2 character LCDs that you’ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color ...

SKU: AF-464 | Brand: Adafruit

The eTape Liquid Level Sensor is a solid-state resistive sensor that measures fluid level without mechanical floats. As the liquid level rises, the hydrostatic pressure compresses the sensor envelope, decreasing its r...

SKU: AF-3345 | Brand: Adafruit

The Adafruit Metro Starter Pack is the perfect beginner kit for learning electronics and Arduino programming. Built around the Adafruit Metro 328 (ATmega328-based, Arduino UNO R3-compatible), this pack includes everyt...

SKU: AF-50 | Brand: Adafruit

We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most...

SKU: SF-COM-10439 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up white! So now you can get visual feedback, or light up your project. These have a 12mm body and...

SKU: AF-618 | Brand: Adafruit

A compact 1.8" TFT display with true 18-bit colour (262,144 shades) and 160 × 128 resolution. It uses a simple SPI interface requiring only 4–5 digital pins and features two white LED backlights running on 3.3 V. Driv...

SKU: SF-PRT-12748 | Brand: SparkFun

A standard SMD (surface-mount) DC barrel power jack for use with common DC wall adapters. This is the same connector size used on most Arduino boards and many other development platforms. Key Features Surface-Mount...

SKU: AF-1929 | Brand: Adafruit

Build your own open-source 8×8 button grid controller with the Adafruit UNTZtrument kit. Designed by PaintYourDragon and based on the Adafruit Trellis platform, this DIY kit features 64 translucent silicone buttons wi...

SKU: AF-276 | Brand: Adafruit

This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for power...

SKU: AF-904 | Brand: Adafruit

This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC...

SKU: EF-EF05006 | Brand: ElecFreaks

The Color Recognition Sensor can detect different colors and trigger corresponding actions for devices such as smart cars. It is ideal for creative coding and STEM learning projects. For example, when a red color is r...

SKU: PI-COM0502 | Brand: Pimoroni

A common-anode 4-digit 7-segment LED display in yellow, ideal for building clocks, timers, counters, and other numeric readouts. The display features 16 through-hole pins controlling four digits, each with a decimal p...

SKU: SF-SEN-26554 | Brand: SparkFun

Measure air quality with unprecedented precision using the SparkFun Qwiic BMV080 – featuring the Bosch BMV080, the world's smallest particulate matter sensor. This tiny sensor detects PM1, PM2.5, and PM10 particles, g...

SKU: YH-6000200200 | Brand: Little Bird

The Yahboom Roboduino is a smart robot car kit built around a custom driver expansion board compatible with Arduino Uno R3. Packed with sensors and modules — including ultrasonic ranging, line tracking, IR control, an...

SKU: WS-29381 | Brand: Waveshare

0.71inch Double Eye Round LCD Display Module, 160×160 Resolution, SPI Interface, 65K Colors

SKU: AF-5836 | Brand: Adafruit

This breakout adds eight analogue input channels over I2C, making it a handy way to read potentiometers, LDRs, flex sensors and other analogue or resistive sensors from boards that need more ADC inputs. It’s especiall...