Arduino

SKU: SF-SEN-24409 | Brand: SparkFun

This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...

SKU: SF-LCD-30217 | Brand: SparkFun

This interface board is for Red Vision projects where you want the camera and vision stack, but would rather send video to a larger external monitor than use a small onboard screen. With the LCD removed, it acts as a ...

SKU: SF-KIT-30216 | Brand: SparkFun

Add camera input and a capacitive touchscreen to an RP2350 RedBoard IoT for machine-vision projects. This kit combines the Red Vision Touch Display for RedBoard with the Red Vision Camera Board - HM01B0 (Color), and i...

SKU: DF-SEN0654 | Brand: DFRobot

This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...

SKU: DF-SEN0682 | Brand: DFRobot

This compact full-solid-state LiDAR module uses a 64×8 DTOF matrix to measure 512 points at once, giving robots and automation projects a wider view of what is directly ahead. It is designed for forward obstacle avoid...

SKU: DF-SEN0664 | Brand: DFRobot

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...

SKU: DF-SEN0665 | Brand: DFRobot

This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude ...

SKU: DF-TEL0177 | Brand: DFRobot

The Air780EU is a 4G Cat 1 communication module for IoT projects that need cellular connectivity across Europe, the Middle East, Russia, Thailand, Africa and other supported regions. It operates on LTE-FDD B1/B3/B7/B8...

SKU: DF-FIT0897 | Brand: DFRobot

This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making th...

SKU: DF-FIT0898 | Brand: DFRobot

This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont m...

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-FIT0916-MM | Brand: DFRobot

This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin ta...

SKU: DF-SEN0253 | Brand: DFRobot

This compact Gravity module combines a Bosch BNO055 absolute orientation sensor with a BMP280 barometric pressure and temperature sensor to create a 10DOF AHRS module for motion, heading and environmental sensing.The ...

SKU: DF-SEN0661 | Brand: DFRobot

This Gravity-series module is a high-precision electrochemical sensor for monitoring formaldehyde (HCHO) in indoor air. It is built around Sensirion’s SFA40 sensing chip and is designed to selectively detect HCHO whil...

SKU: DF-DFR1115-868 | Brand: DFRobot

This Gravity node module is a long-range, low-power wireless communication module for outdoor IoT sensor projects. It is based on the Semtech SX1262 RF chip, uses LoRa modulation, and operates on the EU868 frequency b...

SKU: DF-DFR1115-915 | Brand: DFRobot

This compact wireless node module is designed for long-distance, low-power outdoor IoT projects. Built around the Semtech SX1262 and LoRa modulation, it operates on the 915 MHz US915 band and supports both direct LoRa...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: DF-FIT0916-M | Brand: DFRobot

These tagged Gravity cables help keep wiring clear when a project has lots of similar-looking connections. Each lead carries I2C/UART pin labels, making it easier to identify signals during wiring, testing and debuggi...

SKU: DF-FIT0916-F | Brand: DFRobot

These labelled jumper cables are designed to make Gravity project wiring easier to follow, especially when a build has several similar connections. Each cable carries I2C/UART pin labels so you can identify power, gro...

SKU: DF-FIT0916-MF | Brand: DFRobot

These labelled male-to-female DuPont jumper wires make it easier to keep track of connections in busy electronics builds. Each wire carries I2C/UART pin labelling, helping reduce mix-ups when colour coding or tiny boa...