Arduino

SKU: EC-SIN16080E | Brand: Elecrow

The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most...

SKU: DF-SER0053 | Brand: DFRobot

A 9g micro servo with 300° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch...

SKU: SF-DEV-17119 | Brand: SparkFun

The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teen...

SKU: DF-DFR0643 | Brand: DFRobot

The traditional relay module has complicated wiring and is not friendly to beginners or students. The simple switch module simplifies the wiring method for connecting traditional relays. The input end is equipped with...

SKU: AF-4643 | Brand: Adafruit

This is a great connector for anyone doing RF work, when a right angle RP-SMA connector is required. Solder it into your PCB for a very secure mechanical connection. You've probably seen tons of these on various devel...

SKU: SF-ROB-16836 | Brand: SparkFun

The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less connections to every feature offered. Use our extens...

SKU: EC-ESP11002R | Brand: Elecrow

A WiFi-controlled relay module designed for ESP-01 or ESP-01S modules (based on the ESP8266). The relay is controlled via GPIO0 with a low-level trigger, allowing you to switch mains-powered devices on and off wireles...

SKU: SF-SEN-16977 | Brand: SparkFun

The TFMini-S Micro LiDAR Module is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 10 centimeters (+/- 6cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)! As wi...

SKU: DF-SEN0337 | Brand: DFRobot

TOF Sense is a TOF-based (Time of Flight) laser ranging sensor that offers 1cm-5m detection range, 1mm resolution, ± 1.5cm error, and 10Hz data update frequency. The sensor supports 15 ° ~ 27 ° adjustable FOV, UART an...

SKU: EF-EF04064 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EC-MCA02328UNO | Brand: Elecrow

The Crowduino Uno-SD mainboard is a microcontroller board that completely compatible with the Arduino UNO. It is based on the Atmega328P, which is widely also used in the Arduino Uno and other Arduino compatible board...

SKU: EC-CDD10240D | Brand: Elecrow

The devDuino Relay 1 Node V1.0 is a compact Arduino-compatible microcontroller board with a built-in mains power supply (110–220 V AC), a 10 A relay, and an nRF24L01+ wireless transceiver. It is designed for building ...

SKU: EC-MCS01107S | Brand: Elecrow

The GPS Shield is based on the u-blox NEO-6M receiver module and plugs directly into Arduino UNO, Mega, and compatible boards. It provides GPS positioning data via a serial port connection (pins configurable to D0–D7)...

SKU: EC-AMC01219U | Brand: Elecrow

An all-in-one development board combining an ATmega32U4 microcontroller with an A9G GPRS/GSM/GPS module. Capable of making voice calls, sending SMS text messages, and providing GPS positioning — all controllable via A...

SKU: EC-ACS52001S | Brand: Elecrow

The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB inter...

SKU: EC-MCA01328A | Brand: Elecrow

The Crowduino is Arduino compatible board. Based on Arduino Duemilanove Schematic, 100% compatible to its existing program, shield and IDEs.This Crowduino is a microcontroller board based on the ATmega328 (datasheet)....

SKU: EC-CDD13497DD | Brand: Elecrow

devDuino Sensor Node v4 is a compact Arduino-compatible microcontroller and is designed to build wireless networks based on transceiver nRF24L01+. You can easily connect other sensors or actuators to this platform,...

SKU: EC-AS54887CAN | Brand: Elecrow

The ELE CAN-Bus Shield V1.5 adds CAN-Bus communication capability to your Arduino. Built around the Microchip MCP2515 CAN controller and MCP2551 CAN transceiver, it supports CAN V2.0B at speeds up to 1 Mb/s with both ...

SKU: EC-AS402812NP | Brand: Elecrow

This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onb...

SKU: EC-ACS17101S | Brand: Elecrow

This WiFi Shield connects your Arduino or Crowduino to the internet wirelessly. Just connect it to your wireless network with a few simple instructions, you can start to control your applications through the internet ...