Arduino

SKU: DF-SEN0539-EN | Brand: DFRobot

What is voice recognition?  Voice recognition is a computer technology that recognizes and converts speech signals into editable text or operational commands through analysis. It allows people to interact with...

SKU: LB-LR0293-4A | Brand: Little Bird

This cable is the standard connection for Arduinos, Arduino like products and various other devices and doodads. Perfect to pick up as a spare for the workbench or draw in a conveniant length that will save you fro...

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: LB-LR0030 | Brand: Little Bird

A simple analog Hall effect sensor module for detecting magnetic fields with Arduino. When a magnet is detected, the on-board LED turns on and the analog output changes proportionally to the field strength — making it...

SKU: SF-COM-09181 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: DF-SEN0137 | Brand: DFRobot

DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicate...

SKU: AF-3297 | Brand: Adafruit

The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...

SKU: AF-592 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: AF-3955 | Brand: Adafruit

This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, ...

SKU: LB-LR0296 | Brand: Little Bird

A 9V battery clip adapter with a standard 5.5 × 2.1 mm centre-positive barrel jack. Use it to power any device that accepts 9V input through an onboard barrel jack connector. Key Features 9V Battery Snap – Standard...

SKU: LB-LR0298 | Brand: Little Bird

This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DHT11 library to aid in communicating with this module.**DHT11 Temper...

SKU: DF-DFR0229 | Brand: DFRobot

This is a Micro SD(TF) module from DFRobot. It is compatible with TF SD card (commonly used in Mobile Phone) which is the most tiny card in the market. SD module has various applications such as data logger, au...

SKU: AF-3006 | Brand: Adafruit

The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω s...

SKU: SF-PRT-10007 | Brand: SparkFun

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...

SKU: EC-ASA46530A | Brand: Elecrow

DFPlayer Mini is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module can be used alone with battery power supply, speaker and keypad, or through the serial port control, as the A...

SKU: SF-PRT-13925 | Brand: SparkFun

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield boa...

SKU: AF-4210 | Brand: Adafruit

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching f...

SKU: LB-LR0001 | Brand: Little Bird

This convenient little module allows you to control both the X-axis and Y-axis using two 10k potentiometers.  Also featured is an additional pushbutton switch providing another optional input for your project....