Arduino

SKU: AF-2157 | Brand: Adafruit

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice, bright alphanumeric display that shows letters and numbers in a beaut...

SKU: PL-2833 | Brand: Pololu

The compact (0.5″ × 0.7″) D24V10F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 1 A....

SKU: AF-2213 | Brand: Adafruit

This 8.000 MHz crystal comes in a standard HC49/US short-style package and is breadboard-friendly for use with any microcontroller or device that requires an external crystal. Two 20 pF load capacitors are included. ...

SKU: AF-2353 | Brand: Adafruit

This 7.0" TFT display packs 800×480 pixels with an LED backlight and 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins). It's ideal for projects requiring a large display area for...

SKU: AF-2378 | Brand: Adafruit

The Arduino Pro Mini is SparkFun's minimal design approach to Arduino.  It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board.  There are no connectors attached -...

SKU: AF-1839 | Brand: Adafruit

Making Wearables with an Arduino-Compatible Electronics PlatformThis book introduces readers to building wearable electronics projects using Adafruit's tiny FLORA board: at 4.4 grams, and only 1.75 inches in diameter...

SKU: AF-2278 | Brand: Adafruit

The 64×32 RGB LED Matrix Panel with 4mm pitch features 2048 bright RGB LEDs in a 256×128mm panel. This mid-range pitch offers a good balance between pixel density and viewing distance, suitable for indoor displays vie...

SKU: DF-SEN0014 | Brand: DFRobot

The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than o...

SKU: DF-ROB0021 | Brand: DFRobot

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The mobile robot kit contains two motors, two ...

SKU: PL-1634 | Brand: Pololu

The MQ-3 is a semiconductor gas sensor that detects alcohol vapour at concentrations from 0.04 mg/L to 4 mg/L — a range suitable for building a breathalyser. It provides a simple analog voltage output that requires on...

SKU: DF-FIT0104 | Brand: DFRobot

A pack of ten 8-pin female headers with standard 2.54 mm pitch, designed for use with Arduino boards. These headers are ideal for replacing damaged headers, building custom shields, or prototyping on breadboards and p...

SKU: PL-2510 | Brand: Pololu

Overview A Zumo robot preparing to attack a Parallax SumoBot. Zumo Robot for Arduino, v1.2. This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such...

SKU: AF-2524 | Brand: Adafruit

This high-power RGB LED from Adafruit delivers serious brightness, with each red, green, and blue die capable of handling 350–750mA continuous current (2A peak). At 3W it produces approximately 150 lumens, scaling up ...

SKU: DF-FIT0511 | Brand: DFRobot

The Gravity 4Pin Sensor Adapter converts 4-pin sensors to the DFRobot Gravity interface, making it easy to connect compatible sensors to Gravity-enabled controllers. Features a press-type terminal for quick, tool-free...

SKU: PL-2490 | Brand: Pololu

This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for rangi...

SKU: DF-DFR0131 | Brand: DFRobot

Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping. The Screw terminal can be screwed directly to the terminal on the thread and is reliabl...

SKU: DF-DFR0031-B | Brand: DFRobot

Piranha LED light module (Blue) , and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works. When the LED light module connected to A...

SKU: DF-DFR0031-R | Brand: DFRobot

Piranha LED light module (Red), and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works. When the LED light module connected to Arduino...

SKU: DF-FIT0140 | Brand: DFRobot

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. Commonly used to modify settings on a board or device. APPLICATIONS Jumpering pi...

SKU: DF-DFR0009-BP | Brand: DFRobot

This is the back panel pcb of 1602 Arduino LCD Shield. This shield allows you to place your own LCD onto this shield. It only requieres a 16x2 HD44780 compatible LCD. This Shield uses Arudino LCD4Bit library. ...