Arduino

SKU: DF-DFR0105 | Brand: DFRobot

Most project of Arduino may need more than two voltage supply. When feed with from 4.5-35V, this arduino power shield able to provide a voltage range from 1.25-12V with 3A peak current. Ideal for servo control and ot...

SKU: AF-154 | Brand: Adafruit

This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different h...

SKU: DF-SEN0064 | Brand: DFRobot

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Gl...

SKU: DF-DFR0021-G | Brand: DFRobot

This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin i...

SKU: DF-DFR0021-B | Brand: DFRobot

This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal p...

SKU: DF-FIT0146 | Brand: DFRobot

An 8-pin female header with extra-long legs, designed for stacking Arduino shields. The extended pins pass through to the board below, allowing multiple shields to be stacked on a single Arduino. Pins are spaced at st...

SKU: AF-2651 | Brand: Adafruit

The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...

SKU: AF-1447 | Brand: Adafruit

Standard HD44780 LCDs are useful for creating standalone projects.  This product is similar to our Standard LCD 16x2 display but comes with the header soldered on! 16 characters wide, 2 rows White text on blu...

SKU: DF-DFR0031-G | Brand: DFRobot

This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...

SKU: SF-SEN-09269 | Brand: SparkFun

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors - the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely...

SKU: SF-DEV-09267 | Brand: SparkFun

The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V ...

SKU: DF-DFR0171 | Brand: DFRobot

The DFRobot Arduino-Compatible Screw Shield is a terminal expansion board that allows you to screw in jumper wires to a screw terminal for a much stronger and secure connection for your I/O and power pins. Feel se...

SKU: DF-SEN0130 | Brand: DFRobot

The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and se...

SKU: DF-SEN0138-L | Brand: DFRobot

A compact crash sensor (left-side variant) based on a miniature snap-action micro switch with roller lever. Designed for Arduino and compatible microcontrollers, this sensor module includes an onboard pull-up resistor...

SKU: DF-DFR0216 | Brand: DFRobot

DFRduino Uno V3.0 from DFRobot is a physical world computing board of small size for academics or development . It is a simple microcontroller board fully compatible with Arduino UNO R3 and Arduino IDE open-sour...

SKU: SF-COM-08546 | Brand: SparkFun

A single-digit 7-segment LED display in red with a common anode configuration. Features two decimal point positions, with the right-side decimal point wired and functional. Key Features Single Digit 7-Segment – Com...

SKU: DF-DWG0003 | Brand: DFRobot

A frosted milky-white acrylic base plate for the Arduino UNO and Leonardo. The base mounts underneath the board using nylon standoffs, protecting the underside from contact with work surfaces and giving your setup a c...

SKU: SF-COM-08033 | Brand: SparkFun

This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the bu...

SKU: SF-COM-07835 | Brand: SparkFun

A translucent silicone rubber button pad with 16 buttons in a 4×4 grid. Each button has a hole underneath that accepts a standard 3 mm or 5 mm LED, allowing you to backlight individual buttons with any colour — includ...

SKU: DF-DRI0027 | Brand: DFRobot

Some day,a guy want to make a robotic dog as a gift to his little son.He brought some digital servos, a microcontroller,Lipo batterys...Then he found it hard to drive these smart servos with Arduino processor! ...