Arduino

SKU: LB-LR0327 | Brand: Little Bird

Need more? Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using...

SKU: LB-LS2921 | Brand: Little Bird

Comes as a standard 10K ohm linear potentiometer with 0.1" spacing it works great for  prototyping. It has a nice feel, tweaking it is quite satisfying.These are used on the crack the code shield.1 x Potentiomete...

SKU: EC-RPK13250K | Brand: Elecrow

This Raspberry Pi Pico advanced kit is designed for people who already have some electronics knowledge and programming skills and are interested in the Raspberry Pi. If you want to continue to strengthen your think...

SKU: LB-LR0282 | Brand: Little Bird

This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of around 10KΩ. ...

SKU: AF-4399 | Brand: Adafruit

This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, whi...

SKU: LB-LR0044 | Brand: Little Bird

This compact MPU-6050 module combines a MEMS accelerometer and MEMS gyroscope in a single chip for detecting movement, tilt and rotation across the X, Y and Z axes.Each channel is captured with 16-bit analogue-to-digi...

SKU: LB-LR0062 | Brand: Little Bird

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of...

SKU: EC-DTR61173K | Brand: Elecrow

This starter kit comes with the main components such as LCD1602 display,Step motor,Servo,Remote, touch sensor and Ultrasonic distance sensor, you can make some funny little builds by these things. We will provide d...

SKU: LB-LR0288 | Brand: Little Bird

A simple 5V active buzzer that generates a tone using its built-in oscillator. Just apply a DC voltage and it sounds — no additional signal generation or driver circuit required. Ideal for adding audible alerts, alarm...

SKU: LB-CTCSINGLE | Brand: Little Bird

A single replacement kit for the Crack the Code unit of work. If you're already running the Crack the Code program in your classroom and need to replace or add an individual unit, this kit contains everything needed f...

SKU: EC-CIA00485T | Brand: Elecrow

This is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jammin...

SKU: LB-FLAME-LIGHT | Brand: Little Bird

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it pro...

SKU: SF-DEV-11021 | Brand: SparkFun

The Arduino Uno R3 is the most popular Arduino board and an ideal starting point for learning electronics and programming. Built around the ATmega328 microcontroller, it offers a robust platform for prototyping, inter...

SKU: LB-LR0309-6 | Brand: Little Bird

A matched pair of 5mm infrared LEDs — one transmitter (clear) and one receiver (black) — operating at 940nm. Use them to build object sensors, colour sensors, line sensors, distance sensors, and custom wheel encoders....

SKU: LB-LR0046 | Brand: Little Bird

The 5V 1-Channel Optocoupler Relay Module provides safe, isolated switching of high-voltage loads from a microcontroller. An onboard SMD optocoupler isolates the control circuit from the relay, protecting your Arduino...

SKU: SF-DEV-11113 | Brand: SparkFun

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that yo...

SKU: LB-LR0293-13 | Brand: Little Bird

A 40-pin ribbon of male-to-male (M/M) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jum...

SKU: AF-856 | Brand: Adafruit

The MCP3008 is an 8-channel, 10-bit analogue-to-digital converter (ADC) with an SPI interface. It adds analogue input capability to microcontrollers and microcomputers that lack a built-in ADC — such as the Raspberry ...

SKU: LB-LR0186 | Brand: Little Bird

This is a simple breadboard power supply module that is capable of 7-12V input voltage and selectable outputs (5V or 3.3V) regulated voltage. All headers are 0.1" pitch for simple insertion into a 400 point  b...

SKU: LB-LR0271 | Brand: Little Bird

A bulk pack of 500 standard 5 mm through-hole LEDs in five colours — perfect for classrooms, makerspaces, LED throwies, and any project that needs a large quantity of indicator lights on hand. Key Features 500 LEDs...