Arduino

SKU: DF-DFR0300 | Brand: DFRobot

The Gravity EC (Electrical Conductivity) Sensor measures the conductivity of aqueous solutions, providing an analogue output for Arduino and compatible microcontrollers. EC measurement is essential for monitoring wate...

SKU: SF-DEV-11008 | Brand: SparkFun

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be dama...

SKU: SF-PRT-10374 | Brand: SparkFun

A simple 4-pin jumper wire cable with JST RE connectors on both ends. Great for jumping between boards or connecting to standard 0.1" (2.54 mm) breakaway headers. Specifications Pins – 4 Pitch – 0.1" (2.54 mm) Le...

SKU: DF-SEN0193 | Brand: DFRobot

The Gravity Analogue Capacitive Soil Moisture Sensor measures soil moisture using capacitive sensing rather than resistive probes, providing significantly better corrosion resistance and longer service life. Made from...

SKU: DF-FIT0449 | Brand: DFRobot

INTRODUCTION This speaker module is based on the 8002 speaker amplifier IC. It can be used as a buzzer and also play high quality audio. Volume output is controlled via the potentiomet...

SKU: SF-PRT-10218 | Brand: SparkFun

A standard 9V alkaline battery (Rayovac). Suitable for powering Arduino boards, breadboard projects, and other electronics — use with a voltage regulator to get a stable 5V output. Key Features 9V Alkaline – Standa...

SKU: SF-PRT-09914 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector fo...

SKU: DF-SEN0217 | Brand: DFRobot

INTRODUCTION   The Gravity Water Flow sensor measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usual...

SKU: DF-SEN0017 | Brand: DFRobot

This is a line tracking (following) sensor to guide your robot by telling white from black quickly and accurately. It is commonly used in arduino robot project, and probably is the best line following sens...

SKU: DF-FIT0056 | Brand: DFRobot

This is the most common A to B Male/Male type peripheral USB 2.0 cable for arduino.  It is compatible with most Arduino boardssuch as Arduino Mega, Romeo, Arduino Duemilanove. Often used for printers and other...

SKU: DF-DFR0076 | Brand: DFRobot

This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...

SKU: AF-3525 | Brand: Adafruit

Are you looking to jumper two neighboring male headers (2.54mm apart) without the hassle of maneuvering and re-maneuvering wires? Well then you've jumped to the right page!This pack of ten (10) 2.54mm jumpers is ...

SKU: DF-DFR0438 | Brand: DFRobot

INTRODUCTION The Bright LED module is designed for some special application. It's using a very bright LED component as its light source. Compatible with DFRobot gravity 3-Pin interface, plug and play. What you ne...

SKU: AF-5855 | Brand: Adafruit

A compact 5 V, 0.3 W solar panel from Voltaic Systems, built with ETFE (Ethylene Tetrafluoroethylene) construction for superior durability over standard PET or laminate panels. Featuring 10 high-efficiency monocrystal...

SKU: AF-4217 | Brand: Adafruit

This round panel-mount extension cable adds a USB Micro-B port to your project enclosure without the need for custom-shaped cutouts. The 30 mm diameter adapter fits a standard round hole — drill it with a common hole ...

SKU: WS-29318 | Brand: Waveshare

A 3.5" IPS display module with 320×480 resolution, 262K colours, and a 2-point capacitive touchscreen. The ST7796S display driver communicates over SPI while the FT6336U touch controller uses I2C, keeping wiring simpl...

SKU: TB-MP3146 | Brand: Little Bird

Introducing our new range of Ultra-slim Switchmode AC adaptors. They are extremely light, sleek and compact; enough to snugly and neatly fit side by side on a power board, no more wasted AC outlets! Incorporates a ...

SKU: EF-EF08278 | Brand: ElecFreaks

Raspberry Pi Pico Starter Kit is an electronic starter kit that is designed for Raspberry Pico. The kit provides some basic electronic components such as LEDs, buttons, and photo-diode, it helps you enter a wonderful ...

SKU: DF-DFR0972 | Brand: DFRobot

The Gravity I2C 4-20mA DAC Module outputs 0–25 mA of current controlled via I2C, with high-accuracy 4–20 mA output available after calibration (0.2% linearity error). Built around the GP8302 chip, it provides 12-bit r...

SKU: SF-WRL-19177 | Brand: SparkFun

The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of application...