Arduino

SKU: SF-SEN-09570 | Brand: SparkFun

Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge numb...

SKU: DF-SEN0214 | Brand: DFRobot

The Gravity Analog 20A Current Sensor measures both AC and DC current using the Hall effect, outputting a proportional analog voltage to your microcontroller. With high-voltage isolation built into the circuit design ...

SKU: DF-DFR0481 | Brand: DFRobot

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption,...

SKU: DF-DFR0483 | Brand: DFRobot

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to b...

SKU: DF-DFR0627 | Brand: DFRobot

The Gravity IIC to Dual UART Module converts a single I2C connection into two independent hardware serial ports. Each sub-UART has its own 256-byte FIFO buffer for transmitting and receiving, with individually configu...

SKU: KS-KS0428 | Brand: Keyestudio

The Keyestudio Mini Tank Robot V2.0 is a tracked robotics platform for learning Arduino programming, sensor integration, and smart robot construction. It supports obstacle avoidance, line following, IR remote control,...

SKU: LB-LS7259-360 | Brand: Little Bird

A durable 9G micro servo with full metal gears and 360° continuous rotation. Designed for WPL and MN series RC vehicles and custom robotics projects, it delivers reliable performance and long service life in compact b...

SKU: DF-DFR1199 | Brand: DFRobot

An all-in-one stepper motor module combining the 28BYJ-48 geared stepper with an A4988 driver on a single board. The simplified 4-pin interface (STEP, DIR, 5V, GND) connects directly to Arduino, Raspberry Pi, or ESP32...

SKU: WS-31122 | Brand: Waveshare

A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input...

SKU: DF-SEN0641 | Brand: DFRobot

The RS485 PAR Sensor measures photosynthetically active radiation in the 400–700 nm wavelength range — the light spectrum that plants use for photosynthesis. It converts incident radiation into a signal proportional t...

SKU: DF-DFR1085 | Brand: DFRobot

##Introduction The new Arduino UNO R4 comes in two versions: the UNO R4 WiFi and the UNO R4 Minima. It runs on the Renesas RA4M1 (Arm Cortex®-M4) processor, with a clock speed of 48MHz, which provides a 3x increase ov...

SKU: SF-WRL-23287 | Brand: SparkFun

The SparkFun BlueSMiRF v2 with headers is a wireless Bluetooth® serial link. These boards work as a wireless serial UART pipe and are a great wireless replacement for serial cables. Simply pair, connect, and transmit ...

SKU: SF-DEV-21251 | Brand: SparkFun

The Arduino Nano BLE Sense Rev2 packs the nRF52840 processor (32-bit ARM Cortex-M4 at 64 MHz) into the compact Nano form factor, with 1MB flash and 256KB SRAM. It includes Bluetooth 5.0, an impressive array of onboard...

SKU: DF-FIT0726 | Brand: DFRobot

Put on a sturdy and beautiful enclosure for your electronic project!This project box is made from high-quality ABS material, and the surface of the enclosure is sandblasted. There are screws in the package for conveni...

SKU: SF-CAB-18079 | Brand: SparkFun

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is ty...

SKU: SF-DEV-17712 | Brand: SparkFun

With a 32-bit ARM® Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're ...

SKU: SF-KIT-18577 | Brand: SparkFun

The SparkFun Tinker Kit (STK) is a great way to get started with programming and hardware interaction with the Arduino programming language. This latest version of the STK adds in the Qwiic functionality. Each Spar...

SKU: DF-DFR0760 | Brand: DFRobot

The Gravity Speech Synthesis Module converts text to spoken audio in English and Chinese, including mixed-language content. It connects via I2C or UART using the standard Gravity interface and includes a built-in spea...

SKU: DF-TEL0126 | Brand: DFRobot

This WiFi IoT module would be an excellent choice for IoT classroom teaching and smart home projects. It supports multiple programming platforms, such as MakeCode, Mind+, and Arduino IDE, and can also be used on vario...

SKU: SF-DEV-16985 | Brand: SparkFun

The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded game? How about displaying data that is remotely collect...