Arduino

SKU: DF-SEN0032 | Brand: DFRobot

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...

SKU: DF-SEN0129 | Brand: DFRobot

INTRODUCTION This is an Arduino CH4 gas sensor. It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smok...

SKU: SF-BOB-09056 | Brand: SparkFun

A breakout board for the CD74HC4067 16-channel analogue/digital multiplexer/demultiplexer. This IC internally routes a common signal pin (SIG) to one of 16 channel pins, working with both analogue and digital signals ...

SKU: AF-2927 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 ...

SKU: SF-DEV-13903 | Brand: SparkFun

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.The LilyPad Rai...

SKU: AF-157 | Brand: Adafruit

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to...

SKU: SF-DEV-11008 | Brand: SparkFun

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be dama...

SKU: DF-FIT0449 | Brand: DFRobot

INTRODUCTION This speaker module is based on the 8002 speaker amplifier IC. It can be used as a buzzer and also play high quality audio. Volume output is controlled via the potentiomet...

SKU: SF-PRT-10218 | Brand: SparkFun

A standard 9V alkaline battery (Rayovac). Suitable for powering Arduino boards, breadboard projects, and other electronics — use with a voltage regulator to get a stable 5V output. Key Features 9V Alkaline – Standa...

SKU: DF-FIT0495-A | Brand: DFRobot

A compact all-metal DC gearmotor family from DFRobot, sold here as one motor in seven gear ratios. Every version shares the same 6 V brushed motor, the same 4 mm D-shaped output shaft and the same mounting f...

SKU: DF-SEN0017 | Brand: DFRobot

This is a line tracking (following) sensor to guide your robot by telling white from black quickly and accurately. It is commonly used in arduino robot project, and probably is the best line following sens...

SKU: DF-FIT0056 | Brand: DFRobot

This is the most common A to B Male/Male type peripheral USB 2.0 cable for arduino.  It is compatible with most Arduino boardssuch as Arduino Mega, Romeo, Arduino Duemilanove. Often used for printers and other...

SKU: DF-DFR0076 | Brand: DFRobot

This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...

SKU: AF-4217 | Brand: Adafruit

This round panel-mount extension cable adds a USB Micro-B port to your project enclosure without the need for custom-shaped cutouts. The 30 mm diameter adapter fits a standard round hole — drill it with a common hole ...

SKU: LB-C-W | Brand: Little Bird

A versatile 1m USB-A to USB-C cable for everyday charging and data transfer. The standard length provides flexibility for desk setups, reaching from wall chargers, or connecting devices across your workspace. Key Fea...

SKU: TB-MP3146 | Brand: Little Bird

Introducing our new range of Ultra-slim Switchmode AC adaptors. They are extremely light, sleek and compact; enough to snugly and neatly fit side by side on a power board, no more wasted AC outlets! Incorporates a ...

SKU: EF-EF08278 | Brand: ElecFreaks

Raspberry Pi Pico Starter Kit is an electronic starter kit that is designed for Raspberry Pico. The kit provides some basic electronic components such as LEDs, buttons, and photo-diode, it helps you enter a wonderful ...

SKU: SF-WRL-19177 | Brand: SparkFun

The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of application...

SKU: DF-SEN0546 | Brand: DFRobot

This I2C digital temperature & humidity sensor offers high accuracy of ±3.0RH% for humidity and ±0.5°C for temperature and features a user-programmable humidity & temperature alarm function.Its housing is made of 304 ...

SKU: DF-DFR0816 | Brand: DFRobot

Beetle CM-32U4 is a micro Leonardo controller with an onboard charging chip. As an upgraded version of the DFRobot Beetle Board, this board is greatly optimized in integration and usability, which makes it well a...