Arduino Sensors

SKU: DF-SEN0005 | Brand: DFRobot

This low cost SFR02 ultrasonic ranger has both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, aut...

SKU: AF-466 | Brand: Adafruit

The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm, you can use a SHARP IR distance sensor, but those are only good ...

SKU: DF-SEN0131 | Brand: DFRobot

INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes an...

SKU: DF-SEN0135 | Brand: DFRobot

The HRLV-MaxSonar-EZ (MB1013) is a high-resolution ultrasonic distance sensor with 1 mm resolution and a range of up to 5 metres. It features multiple output formats, internal temperature compensation, virtually no de...

SKU: DF-SEN0140 | Brand: DFRobot

The DFRobot 10 DOF MEMS IMU Sensor combines four sensors on a single compact board — the ADXL345 accelerometer, ITG-3205 gyroscope, HMC5883L magnetometer, and BMP085 barometric pressure sensor. Together they provide 1...

SKU: SF-SEN-08713 | Brand: SparkFun

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but...

SKU: SF-COM-08348 | Brand: SparkFun

The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...

SKU: DF-FIT0319 | Brand: DFRobot

This is a photoelectric switch that is composed of emitter and receptor.The emitter consists of a laser diode,and the laser has the characteristics of high precision, good orientation etc.The receptor consists of a p...

SKU: DF-DFR0244-B | Brand: DFRobot

This is a standard LED Current Meter 10A. It measures 0-9.99A with 2% accuracy. Best suitable for current display in the circuit.Just apply four wires without any extra circuit or components, it gives the reading s...

SKU: DF-DFR0061 | Brand: DFRobot

The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intui...

SKU: AF-164 | Brand: Adafruit

The Sharp GP2Y0A21YK0F is an infrared distance sensor that measures distances from 10 cm to 80 cm by bouncing IR light off objects. It outputs an analogue voltage proportional to distance — approximately 3 V at 10 cm ...

SKU: SF-COM-10953 | Brand: SparkFun

The MMA8452Q is a low-power, 3-axis capacitive MEMS accelerometer with 12-bit resolution. Packed with embedded motion-detection functions and configurable interrupt outputs, it can monitor events autonomously while st...

SKU: DF-DFR0407 | Brand: DFRobot

The Arduino 9 Axes Motion Shield is based on the Bosch BNO055 absolute orientation sensor — a System in Package (SiP) integrating a triaxial 14-bit accelerometer, 16-bit gyroscope (±2000°/s range), triaxial geomagneti...

SKU: AF-642 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: SF-SEN-12728 | Brand: SparkFun

Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Termina...

SKU: SF-SEN-12589 | Brand: SparkFun

The SparkFun RedBot Accelerometer is an add-on sensor that provides bump and motion detection for the RedBot platform. It measures acceleration forces on the X, Y, and Z axes using the MMA8452Q triple-axis acceleromet...

SKU: DF-SEN0202 | Brand: DFRobot

The DFRobot 3D Gesture Sensor (Mini) integrates 3D gesture recognition and motion tracking using Microchip's patented GestIC near-field sensing technology. It can detect clockwise and counterclockwise rotation, direct...

SKU: DF-DFR0018 | Brand: DFRobot

This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. ...

SKU: DF-DFR0032 | Brand: DFRobot

Here is the simplest sound making module that you can use High/Low to drive it. Just change the frequency it buzz, you can hear different sound. It is widely used on your daily application, like PC, refrigerator,...

SKU: SF-SEN-09602 | Brand: SparkFun

The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10µA at o...